FB: sa11x0: convert to use platform resource and ioremap()

Convert the sa11x0 framebuffer driver to obtain the base address of its
hardware registers from the platform resources, and ioremap this rather
than relying on the static mappings.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-sa1100/include/mach/SA-1100.h

@@ -1903,16 +1903,6 @@
 #define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
                 	        	/* (Alternative)                   */
 
-#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
-#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
-#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
-#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
-#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
-#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
-#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
-#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
-#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
-
 #define LCCR0_LEN	0x00000001	/* LCD ENable                      */
 #define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
 #define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */

drivers/video/sa1100fb.c

@@ -705,9 +705,12 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_
 	 * Only update the registers if the controller is enabled
 	 * and something has changed.
 	 */
-	if ((LCCR0 != fbi->reg_lccr0)       || (LCCR1 != fbi->reg_lccr1) ||
-	    (LCCR2 != fbi->reg_lccr2)       || (LCCR3 != fbi->reg_lccr3) ||
-	    (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2))
+	if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 ||
+	    readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 ||
+	    readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 ||
+	    readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 ||
+	    readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 ||
+	    readl_relaxed(fbi->base + DBAR2) != fbi->dbar2)
 		sa1100fb_schedule_work(fbi, C_REENABLE);
 
 	return 0;
@@ -789,28 +792,29 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 	fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
 
 	/* Sequence from 11.7.10 */
-	LCCR3 = fbi->reg_lccr3;
-	LCCR2 = fbi->reg_lccr2;
-	LCCR1 = fbi->reg_lccr1;
-	LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN;
-	DBAR1 = fbi->dbar1;
-	DBAR2 = fbi->dbar2;
-	LCCR0 |= LCCR0_LEN;
+	writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3);
+	writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2);
+	writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1);
+	writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0);
+	writel_relaxed(fbi->dbar1, fbi->base + DBAR1);
+	writel_relaxed(fbi->dbar2, fbi->base + DBAR2);
+	writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0);
 
 	if (machine_is_shannon())
 		gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
 
-	dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
-	dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2);
-	dev_dbg(fbi->dev, "LCCR0 = 0x%08lx\n", LCCR0);
-	dev_dbg(fbi->dev, "LCCR1 = 0x%08lx\n", LCCR1);
-	dev_dbg(fbi->dev, "LCCR2 = 0x%08lx\n", LCCR2);
-	dev_dbg(fbi->dev, "LCCR3 = 0x%08lx\n", LCCR3);
+	dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1));
+	dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
+	dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0));
+	dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1));
+	dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2));
+	dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3));
 }
 
 static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 {
 	DECLARE_WAITQUEUE(wait, current);
+	u32 lccr0;
 
 	dev_dbg(fbi->dev, "Disabling LCD controller\n");
 
@@ -820,9 +824,14 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 	set_current_state(TASK_UNINTERRUPTIBLE);
 	add_wait_queue(&fbi->ctrlr_wait, &wait);
 
-	LCSR = 0xffffffff;	/* Clear LCD Status Register */
-	LCCR0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
-	LCCR0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	/* Clear LCD Status Register */
+	writel_relaxed(~0, fbi->base + LCSR);
+
+	lccr0 = readl_relaxed(fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LDM;	/* Enable LCD Disable Done Interrupt */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
+	lccr0 &= ~LCCR0_LEN;	/* Disable LCD Controller */
+	writel_relaxed(lccr0, fbi->base + LCCR0);
 
 	schedule_timeout(20 * HZ / 1000);
 	remove_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -834,14 +843,15 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
 {
 	struct sa1100fb_info *fbi = dev_id;
-	unsigned int lcsr = LCSR;
+	unsigned int lcsr = readl_relaxed(fbi->base + LCSR);
 
 	if (lcsr & LCSR_LDD) {
-		LCCR0 |= LCCR0_LDM;
+		u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM;
+		writel_relaxed(lccr0, fbi->base + LCCR0);
 		wake_up(&fbi->ctrlr_wait);
 	}
 
-	LCSR = lcsr;
+	writel_relaxed(lcsr, fbi->base + LCSR);
 	return IRQ_HANDLED;
 }
 
@@ -1198,6 +1208,7 @@ static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev)
 static int __devinit sa1100fb_probe(struct platform_device *pdev)
 {
 	struct sa1100fb_info *fbi;
+	struct resource *res;
 	int ret, irq;
 
 	if (!pdev->dev.platform_data) {
@@ -1205,11 +1216,12 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	if (irq < 0 || !res)
 		return -EINVAL;
 
-	if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
+	if (!request_mem_region(res->start, resource_size(res), "LCD"))
 		return -EBUSY;
 
 	fbi = sa1100fb_init_fbinfo(&pdev->dev);
@@ -1217,6 +1229,10 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
 	if (!fbi)
 		goto failed;
 
+	fbi->base = ioremap(res->start, resource_size(res));
+	if (!fbi->base)
+		goto failed;
+
 	/* Initialize video memory */
 	ret = sa1100fb_map_video_memory(fbi);
 	if (ret)
@@ -1263,9 +1279,11 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
  err_free_irq:
 	free_irq(irq, fbi);
  failed:
+	if (fbi)
+		iounmap(fbi->base);
 	platform_set_drvdata(pdev, NULL);
 	kfree(fbi);
-	release_mem_region(0xb0100000, 0x10000);
+	release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 

drivers/video/sa1100fb.h

@@ -10,6 +10,16 @@
  * for more details.
  */
 
+#define LCCR0           0x0000          /* LCD Control Reg. 0 */
+#define LCSR            0x0004          /* LCD Status Reg. */
+#define DBAR1           0x0010          /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1           0x0014          /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2           0x0018          /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2           0x001C          /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1           0x0020          /* LCD Control Reg. 1 */
+#define LCCR2           0x0024          /* LCD Control Reg. 2 */
+#define LCCR3           0x0028          /* LCD Control Reg. 3 */
+
 /* Shadows for LCD controller registers */
 struct sa1100fb_lcd_reg {
 	unsigned long lccr0;
@@ -22,6 +32,7 @@ struct sa1100fb_info {
 	struct fb_info		fb;
 	struct device		*dev;
 	const struct sa1100fb_rgb *rgb[NR_RGB];
+	void __iomem		*base;
 
 	/*
 	 * These are the addresses we mapped