Merge tag 'ux500-multiplatform-mfd' of...

Merge tag 'ux500-multiplatform-mfd' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson

MFD portions of the ux500 multiplatform branch.
A second tag for the ARM SoC tree will build upon
this one. This mainly removes the header file
dependencies from the PRCMU driver in the MFD
subsystem, and moves the PM functions to the
machine.
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

arch/arm/mach-ux500/Makefile

@@ -3,7 +3,7 @@
 #
 
 obj-y				:= cpu.o devices.o devices-common.o \
-				   id.o usb.o timer.o
+				   id.o usb.o timer.o pm.o
 obj-$(CONFIG_CPU_IDLE)          += cpuidle.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o

arch/arm/mach-ux500/board-mop500.c

@@ -206,63 +206,6 @@ struct ab8500_platform_data ab8500_platdata = {
 	.codec		= &ab8500_codec_pdata,
 };
 
-/*
- * Thermal Sensor
- */
-
-static struct resource db8500_thsens_resources[] = {
-	{
-		.name = "IRQ_HOTMON_LOW",
-		.start  = IRQ_PRCMU_HOTMON_LOW,
-		.end    = IRQ_PRCMU_HOTMON_LOW,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.name = "IRQ_HOTMON_HIGH",
-		.start  = IRQ_PRCMU_HOTMON_HIGH,
-		.end    = IRQ_PRCMU_HOTMON_HIGH,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct db8500_thsens_platform_data db8500_thsens_data = {
-	.trip_points[0] = {
-		.temp = 70000,
-		.type = THERMAL_TRIP_ACTIVE,
-		.cdev_name = {
-			[0] = "thermal-cpufreq-0",
-		},
-	},
-	.trip_points[1] = {
-		.temp = 75000,
-		.type = THERMAL_TRIP_ACTIVE,
-		.cdev_name = {
-			[0] = "thermal-cpufreq-0",
-		},
-	},
-	.trip_points[2] = {
-		.temp = 80000,
-		.type = THERMAL_TRIP_ACTIVE,
-		.cdev_name = {
-			[0] = "thermal-cpufreq-0",
-		},
-	},
-	.trip_points[3] = {
-		.temp = 85000,
-		.type = THERMAL_TRIP_CRITICAL,
-	},
-	.num_trips = 4,
-};
-
-static struct platform_device u8500_thsens_device = {
-	.name           = "db8500-thermal",
-	.resource       = db8500_thsens_resources,
-	.num_resources  = ARRAY_SIZE(db8500_thsens_resources),
-	.dev	= {
-		.platform_data	= &db8500_thsens_data,
-	},
-};
-
 static struct platform_device u8500_cpufreq_cooling_device = {
 	.name           = "db8500-cpufreq-cooling",
 };
@@ -622,7 +565,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&snowball_key_dev,
 	&snowball_sbnet_dev,
 	&snowball_gpio_en_3v3_regulator_dev,
-	&u8500_thsens_device,
 	&u8500_cpufreq_cooling_device,
 };
 

arch/arm/mach-ux500/cpu-db8500.c

@@ -94,8 +94,6 @@ void __init u8500_map_io(void)
 		iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
 	else
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
-
-	_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
 }
 
 static struct resource db8500_pmu_resources[] = {

arch/arm/mach-ux500/cpu.c

@@ -8,7 +8,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx500-prcmu.h>
 #include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
 #include <linux/err.h>
@@ -20,6 +20,7 @@
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-ux500.h>
+#include <linux/platform_data/arm-ux500-pm.h>
 
 #include <asm/mach/map.h>
 
@@ -30,8 +31,6 @@
 #include "board-mop500.h"
 #include "id.h"
 
-void __iomem *_PRCMU_BASE;
-
 /*
  * FIXME: Should we set up the GPIO domain here?
  *
@@ -68,13 +67,19 @@ void __init ux500_init_irq(void)
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
-	if (cpu_is_u8500_family() || cpu_is_u9540())
-		db8500_prcmu_early_init();
-
-	if (cpu_is_u8500_family() || cpu_is_u9540())
+	if (cpu_is_u8500_family()) {
+		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
+		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		u8500_clk_init();
-	else if (cpu_is_u8540())
+	} else if (cpu_is_u9540()) {
+		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
+		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
+		u8500_clk_init();
+	} else if (cpu_is_u8540()) {
+		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
+		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1);
 		u8540_clk_init();
+	}
 }
 
 void __init ux500_init_late(void)

arch/arm/mach-ux500/cpuidle.c

@@ -16,6 +16,7 @@
 #include <linux/atomic.h>
 #include <linux/smp.h>
 #include <linux/mfd/dbx500-prcmu.h>
+#include <linux/platform_data/arm-ux500-pm.h>
 
 #include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
@@ -130,7 +131,7 @@ int __init ux500_idle_init(void)
 	int ret, cpu;
 	struct cpuidle_device *device;
 
-        /* Configure wake up reasons */
+	/* Configure wake up reasons */
 	prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) |
 			     PRCMU_WAKEUP(ABB));
 

arch/arm/mach-ux500/devices-db8500.c

@@ -199,6 +199,8 @@ struct platform_device u8500_ske_keypad_device = {
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
+	.ab_irq		= IRQ_DB8500_AB8500,
+	.irq_base	= IRQ_PRCMU_BASE,
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
 };

arch/arm/mach-ux500/include/mach/hardware.h

@@ -39,8 +39,6 @@
 
 #ifndef __ASSEMBLY__
 
-extern void __iomem *_PRCMU_BASE;
-
 #define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
 
 #endif				/* __ASSEMBLY__ */

arch/arm/mach-ux500/include/mach/irqs-db8500.h

@@ -109,31 +109,6 @@
 
 /* Virtual interrupts corresponding to the PRCMU wakeups.  */
 #define IRQ_PRCMU_BASE IRQ_SOC_START
-#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE)
-
-#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE)
-#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1)
-#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2)
-#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3)
-#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4)
-#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5)
-#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6)
-#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7)
-#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8)
-#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9)
-#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10)
-#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11)
-#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12)
-#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13)
-#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14)
-#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15)
-#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16)
-#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17)
-#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18)
-#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19)
-#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20)
-#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21)
-#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22)
 #define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
 
 /*

arch/arm/mach-ux500/pm.c

+/*
+ * Copyright (C) ST-Ericsson SA 2010-2013
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com> for
+ *         ST-Ericsson.
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro.
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/platform_data/arm-ux500-pm.h>
+
+#include <mach/hardware.h>
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY    (prcmu_base + 0x130)
+#define PRCM_ARM_WFI_STANDBY_WFI0		0x08
+#define PRCM_ARM_WFI_STANDBY_WFI1		0x10
+#define PRCM_IOCR		(prcmu_base + 0x310)
+#define PRCM_IOCR_IOFORCE			0x1
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ	(prcmu_base + 0x328)
+#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ	0x1
+
+#define PRCM_A9_MASK_ACK	(prcmu_base + 0x32c)
+#define PRCM_ARMITMSK31TO0	(prcmu_base + 0x11c)
+#define PRCM_ARMITMSK63TO32	(prcmu_base + 0x120)
+#define PRCM_ARMITMSK95TO64	(prcmu_base + 0x124)
+#define PRCM_ARMITMSK127TO96	(prcmu_base + 0x128)
+#define PRCM_POWER_STATE_VAL	(prcmu_base + 0x25C)
+#define PRCM_ARMITVAL31TO0	(prcmu_base + 0x260)
+#define PRCM_ARMITVAL63TO32	(prcmu_base + 0x264)
+#define PRCM_ARMITVAL95TO64	(prcmu_base + 0x268)
+#define PRCM_ARMITVAL127TO96	(prcmu_base + 0x26C)
+
+static void __iomem *prcmu_base;
+
+/* This function decouple the gic from the prcmu */
+int prcmu_gic_decouple(void)
+{
+	u32 val = readl(PRCM_A9_MASK_REQ);
+
+	/* Set bit 0 register value to 1 */
+	writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ,
+	       PRCM_A9_MASK_REQ);
+
+	/* Make sure the register is updated */
+	readl(PRCM_A9_MASK_REQ);
+
+	/* Wait a few cycles for the gic mask completion */
+	udelay(1);
+
+	return 0;
+}
+
+/* This function recouple the gic with the prcmu */
+int prcmu_gic_recouple(void)
+{
+	u32 val = readl(PRCM_A9_MASK_REQ);
+
+	/* Set bit 0 register value to 0 */
+	writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ);
+
+	return 0;
+}
+
+#define PRCMU_GIC_NUMBER_REGS 5
+
+/*
+ * This function checks if there are pending irq on the gic. It only
+ * makes sense if the gic has been decoupled before with the
+ * db8500_prcmu_gic_decouple function. Disabling an interrupt only
+ * disables the forwarding of the interrupt to any CPU interface. It
+ * does not prevent the interrupt from changing state, for example
+ * becoming pending, or active and pending if it is already
+ * active. Hence, we have to check the interrupt is pending *and* is
+ * active.
+ */
+bool prcmu_gic_pending_irq(void)
+{
+	u32 pr; /* Pending register */
+	u32 er; /* Enable register */
+	void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
+	int i;
+
+	/* 5 registers. STI & PPI not skipped */
+	for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) {
+
+		pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4);
+		er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+		if (pr & er)
+			return true; /* There is a pending interrupt */
+	}
+
+	return false;
+}
+
+/*
+ * This function checks if there are pending interrupt on the
+ * prcmu which has been delegated to monitor the irqs with the
+ * db8500_prcmu_copy_gic_settings function.
+ */
+bool prcmu_pending_irq(void)
+{
+	u32 it, im;
+	int i;
+
+	for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
+		it = readl(PRCM_ARMITVAL31TO0 + i * 4);
+		im = readl(PRCM_ARMITMSK31TO0 + i * 4);
+		if (it & im)
+			return true; /* There is a pending interrupt */
+	}
+
+	return false;
+}
+
+/*
+ * This function checks if the specified cpu is in in WFI. It's usage
+ * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
+ * function. Of course passing smp_processor_id() to this function will
+ * always return false...
+ */
+bool prcmu_is_cpu_in_wfi(int cpu)
+{
+	return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 :
+		     PRCM_ARM_WFI_STANDBY_WFI0;
+}
+
+/*
+ * This function copies the gic SPI settings to the prcmu in order to
+ * monitor them and abort/finish the retention/off sequence or state.
+ */
+int prcmu_copy_gic_settings(void)
+{
+	u32 er; /* Enable register */
+	void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
+	int i;
+
+	/* We skip the STI and PPI */
+	for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
+		er = readl_relaxed(dist_base +
+				   GIC_DIST_ENABLE_SET + (i + 1) * 4);
+		writel(er, PRCM_ARMITMSK31TO0 + i * 4);
+	}
+
+	return 0;
+}
+
+void __init ux500_pm_init(u32 phy_base, u32 size)
+{
+	prcmu_base = ioremap(phy_base, size);
+	if (!prcmu_base) {
+		pr_err("could not remap PRCMU for PM functions\n");
+		return;
+	}
+	/*
+	 * On watchdog reboot the GIC is in some cases decoupled.
+	 * This will make sure that the GIC is correctly configured.
+	 */
+	prcmu_gic_recouple();
+}

drivers/mfd/db8500-prcmu.c

@@ -26,7 +26,6 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
-#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/mfd/abx500/ab8500.h>
@@ -34,9 +33,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/cpufreq.h>
 #include <linux/platform_data/ux500_wdt.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/db8500-regs.h>
+#include <linux/platform_data/db8500_thermal.h>
 #include "dbx500-prcmu-regs.h"
 
 /* Index of different voltages to be used when accessing AVSData */
@@ -276,8 +273,34 @@ static struct irq_domain *db8500_irq_domain;
  * the bits in the bit field are not. (The bits also have a tendency to move
  * around, to further complicate matters.)
  */
-#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE)
+#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name))
 #define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name)
+
+#define IRQ_PRCMU_RTC 0
+#define IRQ_PRCMU_RTT0 1
+#define IRQ_PRCMU_RTT1 2
+#define IRQ_PRCMU_HSI0 3
+#define IRQ_PRCMU_HSI1 4
+#define IRQ_PRCMU_CA_WAKE 5
+#define IRQ_PRCMU_USB 6
+#define IRQ_PRCMU_ABB 7
+#define IRQ_PRCMU_ABB_FIFO 8
+#define IRQ_PRCMU_ARM 9
+#define IRQ_PRCMU_MODEM_SW_RESET_REQ 10
+#define IRQ_PRCMU_GPIO0 11
+#define IRQ_PRCMU_GPIO1 12
+#define IRQ_PRCMU_GPIO2 13
+#define IRQ_PRCMU_GPIO3 14
+#define IRQ_PRCMU_GPIO4 15
+#define IRQ_PRCMU_GPIO5 16
+#define IRQ_PRCMU_GPIO6 17
+#define IRQ_PRCMU_GPIO7 18
+#define IRQ_PRCMU_GPIO8 19
+#define IRQ_PRCMU_CA_SLEEP 20
+#define IRQ_PRCMU_HOTMON_LOW 21
+#define IRQ_PRCMU_HOTMON_HIGH 22
+#define NUM_PRCMU_WAKEUPS 23
+
 static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = {
 	IRQ_ENTRY(RTC),
 	IRQ_ENTRY(RTT0),
@@ -422,9 +445,10 @@ static DEFINE_SPINLOCK(clkout_lock);
 
 /* Global var to runtime determine TCDM base for v2 or v1 */
 static __iomem void *tcdm_base;
+static __iomem void *prcmu_base;
 
 struct clk_mgt {
-	void __iomem *reg;
+	u32 offset;
 	u32 pllsw;
 	int branch;
 	bool clk38div;
@@ -599,9 +623,9 @@ int db8500_prcmu_set_display_clocks(void)
 	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
-	writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
-	writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
+	writel(PRCMU_DSI_CLOCK_SETTING, prcmu_base + PRCM_HDMICLK_MGT);
+	writel(PRCMU_DSI_LP_CLOCK_SETTING, prcmu_base + PRCM_TVCLK_MGT);
+	writel(PRCMU_DPI_CLOCK_SETTING, prcmu_base + PRCM_LCDCLK_MGT);
 
 	/* Release the HW semaphore. */
 	writel(0, PRCM_SEM);
@@ -613,7 +637,7 @@ int db8500_prcmu_set_display_clocks(void)
 
 u32 db8500_prcmu_read(unsigned int reg)
 {
-	return readl(_PRCMU_BASE + reg);
+	return readl(prcmu_base + reg);
 }
 
 void db8500_prcmu_write(unsigned int reg, u32 value)
@@ -621,7 +645,7 @@ void db8500_prcmu_write(unsigned int reg, u32 value)
 	unsigned long flags;
 
 	spin_lock_irqsave(&prcmu_lock, flags);
-	writel(value, (_PRCMU_BASE + reg));
+	writel(value, (prcmu_base + reg));
 	spin_unlock_irqrestore(&prcmu_lock, flags);
 }
 
@@ -631,9 +655,9 @@ void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
 	unsigned long flags;
 
 	spin_lock_irqsave(&prcmu_lock, flags);
-	val = readl(_PRCMU_BASE + reg);
+	val = readl(prcmu_base + reg);
 	val = ((val & ~mask) | (value & mask));
-	writel(val, (_PRCMU_BASE + reg));
+	writel(val, (prcmu_base + reg));
 	spin_unlock_irqrestore(&prcmu_lock, flags);
 }
 
@@ -793,119 +817,6 @@ u8 db8500_prcmu_get_power_state_result(void)
 	return readb(tcdm_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS);
 }
 
-/* This function decouple the gic from the prcmu */
-int db8500_prcmu_gic_decouple(void)
-{
-	u32 val = readl(PRCM_A9_MASK_REQ);
-
-	/* Set bit 0 register value to 1 */
-	writel(val | PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ,
-	       PRCM_A9_MASK_REQ);
-
-	/* Make sure the register is updated */
-	readl(PRCM_A9_MASK_REQ);
-
-	/* Wait a few cycles for the gic mask completion */
-	udelay(1);
-
-	return 0;
-}
-
-/* This function recouple the gic with the prcmu */
-int db8500_prcmu_gic_recouple(void)
-{
-	u32 val = readl(PRCM_A9_MASK_REQ);
-
-	/* Set bit 0 register value to 0 */
-	writel(val & ~PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ, PRCM_A9_MASK_REQ);
-
-	return 0;
-}
-
-#define PRCMU_GIC_NUMBER_REGS 5
-
-/*
- * This function checks if there are pending irq on the gic. It only
- * makes sense if the gic has been decoupled before with the
- * db8500_prcmu_gic_decouple function. Disabling an interrupt only
- * disables the forwarding of the interrupt to any CPU interface. It
- * does not prevent the interrupt from changing state, for example
- * becoming pending, or active and pending if it is already
- * active. Hence, we have to check the interrupt is pending *and* is
- * active.
- */
-bool db8500_prcmu_gic_pending_irq(void)
-{
-	u32 pr; /* Pending register */
-	u32 er; /* Enable register */
-	void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
-	int i;
-
-        /* 5 registers. STI & PPI not skipped */
-	for (i = 0; i < PRCMU_GIC_NUMBER_REGS; i++) {
-
-		pr = readl_relaxed(dist_base + GIC_DIST_PENDING_SET + i * 4);
-		er = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
-
-		if (pr & er)
-			return true; /* There is a pending interrupt */
-	}
-
-	return false;
-}
-
-/*
- * This function checks if there are pending interrupt on the
- * prcmu which has been delegated to monitor the irqs with the
- * db8500_prcmu_copy_gic_settings function.
- */
-bool db8500_prcmu_pending_irq(void)
-{
-	u32 it, im;
-	int i;
-
-	for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
-		it = readl(PRCM_ARMITVAL31TO0 + i * 4);
-		im = readl(PRCM_ARMITMSK31TO0 + i * 4);
-		if (it & im)
-			return true; /* There is a pending interrupt */
-	}
-
-	return false;
-}
-
-/*
- * This function checks if the specified cpu is in in WFI. It's usage
- * makes sense only if the gic is decoupled with the db8500_prcmu_gic_decouple
- * function. Of course passing smp_processor_id() to this function will
- * always return false...
- */
-bool db8500_prcmu_is_cpu_in_wfi(int cpu)
-{
-	return readl(PRCM_ARM_WFI_STANDBY) & cpu ? PRCM_ARM_WFI_STANDBY_WFI1 :
-		     PRCM_ARM_WFI_STANDBY_WFI0;
-}
-
-/*
- * This function copies the gic SPI settings to the prcmu in order to
- * monitor them and abort/finish the retention/off sequence or state.
- */
-int db8500_prcmu_copy_gic_settings(void)
-{
-	u32 er; /* Enable register */
-	void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE);
-	int i;
-
-        /* We skip the STI and PPI */
-	for (i = 0; i < PRCMU_GIC_NUMBER_REGS - 1; i++) {
-		er = readl_relaxed(dist_base +
-				   GIC_DIST_ENABLE_SET + (i + 1) * 4);
-		writel(er, PRCM_ARMITMSK31TO0 + i * 4);
-	}
-
-	return 0;
-}
-
 /* This function should only be called while mb0_transfer.lock is held. */
 static void config_wakeups(void)
 {
@@ -1059,7 +970,7 @@ int db8500_prcmu_set_ddr_opp(u8 opp)
 /* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
 static void request_even_slower_clocks(bool enable)
 {
-	void __iomem *clock_reg[] = {
+	u32 clock_reg[] = {
 		PRCM_ACLK_MGT,
 		PRCM_DMACLK_MGT
 	};
@@ -1076,7 +987,7 @@ static void request_even_slower_clocks(bool enable)
 		u32 val;
 		u32 div;
 
-		val = readl(clock_reg[i]);
+		val = readl(prcmu_base + clock_reg[i]);
 		div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
 		if (enable) {
 			if ((div <= 1) || (div > 15)) {
@@ -1092,7 +1003,7 @@ static void request_even_slower_clocks(bool enable)
 		}
 		val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
 			(div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
-		writel(val, clock_reg[i]);
+		writel(val, prcmu_base + clock_reg[i]);
 	}
 
 unlock_and_return:
@@ -1446,14 +1357,14 @@ static int request_clock(u8 clock, bool enable)
 	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	val = readl(clk_mgt[clock].reg);
+	val = readl(prcmu_base + clk_mgt[clock].offset);
 	if (enable) {
 		val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
 	} else {
 		clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
 		val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
 	}
-	writel(val, clk_mgt[clock].reg);
+	writel(val, prcmu_base + clk_mgt[clock].offset);
 
 	/* Release the HW semaphore. */
 	writel(0, PRCM_SEM);
@@ -1629,7 +1540,7 @@ static unsigned long clock_rate(u8 clock)
 	u32 pllsw;
 	unsigned long rate = ROOT_CLOCK_RATE;
 
-	val = readl(clk_mgt[clock].reg);
+	val = readl(prcmu_base + clk_mgt[clock].offset);
 
 	if (val & PRCM_CLK_MGT_CLK38) {
 		if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
@@ -1785,7 +1696,7 @@ static long round_clock_rate(u8 clock, unsigned long rate)
 	unsigned long src_rate;
 	long rounded_rate;
 
-	val = readl(clk_mgt[clock].reg);
+	val = readl(prcmu_base + clk_mgt[clock].offset);
 	src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
 		clk_mgt[clock].branch);
 	div = clock_divider(src_rate, rate);
@@ -1933,7 +1844,7 @@ static void set_clock_rate(u8 clock, unsigned long rate)
 	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	val = readl(clk_mgt[clock].reg);
+	val = readl(prcmu_base + clk_mgt[clock].offset);
 	src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
 		clk_mgt[clock].branch);
 	div = clock_divider(src_rate, rate);
@@ -1961,7 +1872,7 @@ static void set_clock_rate(u8 clock, unsigned long rate)
 		val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
 		val |= min(div, (u32)31);
 	}
-	writel(val, clk_mgt[clock].reg);
+	writel(val, prcmu_base + clk_mgt[clock].offset);
 
 	/* Release the HW semaphore. */
 	writel(0, PRCM_SEM);
@@ -2764,14 +2675,13 @@ static struct irq_domain_ops db8500_irq_ops = {
 	.xlate  = irq_domain_xlate_twocell,
 };
 
-static int db8500_irq_init(struct device_node *np)
+static int db8500_irq_init(struct device_node *np, int irq_base)
 {
-	int irq_base = 0;
 	int i;
 
 	/* In the device tree case, just take some IRQs */
-	if (!np)
-		irq_base = IRQ_PRCMU_BASE;
+	if (np)
+		irq_base = 0;
 
 	db8500_irq_domain = irq_domain_add_simple(
 		np, NUM_PRCMU_WAKEUPS, irq_base,
@@ -2825,8 +2735,19 @@ static void dbx500_fw_version_init(struct platform_device *pdev,
 	}
 }
 
-void __init db8500_prcmu_early_init(void)
+void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
 {
+	/*
+	 * This is a temporary remap to bring up the clocks. It is
+	 * subsequently replaces with a real remap. After the merge of
+	 * the mailbox subsystem all of this early code goes away, and the
+	 * clock driver can probe independently. An early initcall will
+	 * still be needed, but it can be diverted into drivers/clk/ux500.
+	 */
+	prcmu_base = ioremap(phy_base, size);
+	if (!prcmu_base)
+		pr_err("%s: ioremap() of prcmu registers failed!\n", __func__);
+
 	spin_lock_init(&mb0_transfer.lock);
 	spin_lock_init(&mb0_transfer.dbb_irqs_lock);
 	mutex_init(&mb0_transfer.ac_wake_lock);
@@ -3092,18 +3013,57 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = {
 	},
 };
 
-static struct resource ab8500_resources[] = {
-	[0] = {
-		.start	= IRQ_DB8500_AB8500,
-		.end	= IRQ_DB8500_AB8500,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
 static struct ux500_wdt_data db8500_wdt_pdata = {
 	.timeout = 600, /* 10 minutes */
 	.has_28_bits_resolution = true,
 };
+/*
+ * Thermal Sensor
+ */
+
+static struct resource db8500_thsens_resources[] = {
+	{
+		.name = "IRQ_HOTMON_LOW",
+		.start  = IRQ_PRCMU_HOTMON_LOW,
+		.end    = IRQ_PRCMU_HOTMON_LOW,
+		.flags  = IORESOURCE_IRQ,
+	},
+	{
+		.name = "IRQ_HOTMON_HIGH",
+		.start  = IRQ_PRCMU_HOTMON_HIGH,
+		.end    = IRQ_PRCMU_HOTMON_HIGH,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct db8500_thsens_platform_data db8500_thsens_data = {
+	.trip_points[0] = {
+		.temp = 70000,
+		.type = THERMAL_TRIP_ACTIVE,
+		.cdev_name = {
+			[0] = "thermal-cpufreq-0",
+		},
+	},
+	.trip_points[1] = {
+		.temp = 75000,
+		.type = THERMAL_TRIP_ACTIVE,
+		.cdev_name = {
+			[0] = "thermal-cpufreq-0",
+		},
+	},
+	.trip_points[2] = {
+		.temp = 80000,
+		.type = THERMAL_TRIP_ACTIVE,
+		.cdev_name = {
+			[0] = "thermal-cpufreq-0",
+		},
+	},
+	.trip_points[3] = {
+		.temp = 85000,
+		.type = THERMAL_TRIP_CRITICAL,
+	},
+	.num_trips = 4,
+};
 
 static struct mfd_cell db8500_prcmu_devs[] = {
 	{
@@ -3125,11 +3085,10 @@ static struct mfd_cell db8500_prcmu_devs[] = {
 		.id = -1,
 	},
 	{
-		.name = "ab8500-core",
-		.of_compatible = "stericsson,ab8500",
-		.num_resources = ARRAY_SIZE(ab8500_resources),
-		.resources = ab8500_resources,
-		.id = AB8500_VERSION_AB8500,
+		.name = "db8500-thermal",
+		.num_resources = ARRAY_SIZE(db8500_thsens_resources),
+		.resources = db8500_thsens_resources,
+		.platform_data = &db8500_thsens_data,
 	},
 };
 
@@ -3141,6 +3100,24 @@ static void db8500_prcmu_update_cpufreq(void)
 	}
 }
 
+static int db8500_prcmu_register_ab8500(struct device *parent,
+					struct ab8500_platform_data *pdata,
+					int irq)
+{
+	struct resource ab8500_resource = DEFINE_RES_IRQ(irq);
+	struct mfd_cell ab8500_cell = {
+		.name = "ab8500-core",
+		.of_compatible = "stericsson,ab8500",
+		.id = AB8500_VERSION_AB8500,
+		.platform_data = pdata,
+		.pdata_size = sizeof(struct ab8500_platform_data),
+		.resources = &ab8500_resource,
+		.num_resources = 1,
+	};
+
+	return mfd_add_devices(parent, 0, &ab8500_cell, 1, NULL, 0, NULL);
+}
+
 /**
  * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
  *
@@ -3149,11 +3126,21 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
-	int irq = 0, err = 0, i;
+	int irq = 0, err = 0;
 	struct resource *res;
 
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
+	if (!res) {
+		dev_err(&pdev->dev, "no prcmu memory region provided\n");
+		return -ENOENT;
+	}
+	prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	if (!prcmu_base) {
+		dev_err(&pdev->dev,
+			"failed to ioremap prcmu register memory\n");
+		return -ENOENT;
+	}
 	init_prcm_registers();
-
 	dbx500_fw_version_init(pdev, pdata->version_offset);
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
 	if (!res) {
@@ -3180,26 +3167,27 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 		goto no_irq_return;
 	}
 
-	db8500_irq_init(np);
-
-	for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) {
-		if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) {
-			db8500_prcmu_devs[i].platform_data = pdata->ab_platdata;
-			db8500_prcmu_devs[i].pdata_size = sizeof(struct ab8500_platform_data);
-		}
-	}
+	db8500_irq_init(np, pdata->irq_base);
 
 	prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
 
 	db8500_prcmu_update_cpufreq();
 
 	err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs,
-			      ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL);
+			      ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, db8500_irq_domain);
 	if (err) {
 		pr_err("prcmu: Failed to add subdevices\n");
 		return err;
 	}
 
+	err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata,
+					   pdata->ab_irq);
+	if (err) {
+		mfd_remove_devices(&pdev->dev);
+		pr_err("prcmu: Failed to add ab8500 subdevice\n");
+		goto no_irq_return;
+	}
+
 	pr_info("DB8500 PRCMU initialized\n");
 
 no_irq_return:

drivers/mfd/dbx500-prcmu-regs.h

@@ -13,136 +13,110 @@
 #ifndef __DB8500_PRCMU_REGS_H
 #define __DB8500_PRCMU_REGS_H
 
-#include <mach/hardware.h>
-
 #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
 
-#define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \
-	+ _offset)
-#define PRCM_ACLK_MGT		PRCM_CLK_MGT(0x004)
-#define PRCM_SVACLK_MGT		PRCM_CLK_MGT(0x008)
-#define PRCM_SIACLK_MGT		PRCM_CLK_MGT(0x00C)
-#define PRCM_SGACLK_MGT		PRCM_CLK_MGT(0x014)
-#define PRCM_UARTCLK_MGT	PRCM_CLK_MGT(0x018)
-#define PRCM_MSP02CLK_MGT	PRCM_CLK_MGT(0x01C)
-#define PRCM_I2CCLK_MGT		PRCM_CLK_MGT(0x020)
-#define PRCM_SDMMCCLK_MGT	PRCM_CLK_MGT(0x024)
-#define PRCM_SLIMCLK_MGT	PRCM_CLK_MGT(0x028)
-#define PRCM_PER1CLK_MGT	PRCM_CLK_MGT(0x02C)
-#define PRCM_PER2CLK_MGT	PRCM_CLK_MGT(0x030)
-#define PRCM_PER3CLK_MGT	PRCM_CLK_MGT(0x034)
-#define PRCM_PER5CLK_MGT	PRCM_CLK_MGT(0x038)
-#define PRCM_PER6CLK_MGT	PRCM_CLK_MGT(0x03C)
-#define PRCM_PER7CLK_MGT	PRCM_CLK_MGT(0x040)
-#define PRCM_LCDCLK_MGT		PRCM_CLK_MGT(0x044)
-#define PRCM_BMLCLK_MGT		PRCM_CLK_MGT(0x04C)
-#define PRCM_HSITXCLK_MGT	PRCM_CLK_MGT(0x050)
-#define PRCM_HSIRXCLK_MGT	PRCM_CLK_MGT(0x054)
-#define PRCM_HDMICLK_MGT	PRCM_CLK_MGT(0x058)
-#define PRCM_APEATCLK_MGT	PRCM_CLK_MGT(0x05C)
-#define PRCM_APETRACECLK_MGT	PRCM_CLK_MGT(0x060)
-#define PRCM_MCDECLK_MGT	PRCM_CLK_MGT(0x064)
-#define PRCM_IPI2CCLK_MGT	PRCM_CLK_MGT(0x068)
-#define PRCM_DSIALTCLK_MGT	PRCM_CLK_MGT(0x06C)
-#define PRCM_DMACLK_MGT		PRCM_CLK_MGT(0x074)
-#define PRCM_B2R2CLK_MGT	PRCM_CLK_MGT(0x078)
-#define PRCM_TVCLK_MGT		PRCM_CLK_MGT(0x07C)
-#define PRCM_UNIPROCLK_MGT	PRCM_CLK_MGT(0x278)
-#define PRCM_SSPCLK_MGT		PRCM_CLK_MGT(0x280)
-#define PRCM_RNGCLK_MGT		PRCM_CLK_MGT(0x284)
-#define PRCM_UICCCLK_MGT	PRCM_CLK_MGT(0x27C)
-#define PRCM_MSP1CLK_MGT	PRCM_CLK_MGT(0x288)
-
-#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ACLK_MGT		(0x004)
+#define PRCM_SVACLK_MGT		(0x008)
+#define PRCM_SIACLK_MGT		(0x00C)
+#define PRCM_SGACLK_MGT		(0x014)
+#define PRCM_UARTCLK_MGT	(0x018)
+#define PRCM_MSP02CLK_MGT	(0x01C)
+#define PRCM_I2CCLK_MGT		(0x020)
+#define PRCM_SDMMCCLK_MGT	(0x024)
+#define PRCM_SLIMCLK_MGT	(0x028)
+#define PRCM_PER1CLK_MGT	(0x02C)
+#define PRCM_PER2CLK_MGT	(0x030)
+#define PRCM_PER3CLK_MGT	(0x034)
+#define PRCM_PER5CLK_MGT	(0x038)
+#define PRCM_PER6CLK_MGT	(0x03C)
+#define PRCM_PER7CLK_MGT	(0x040)
+#define PRCM_LCDCLK_MGT		(0x044)
+#define PRCM_BMLCLK_MGT		(0x04C)
+#define PRCM_HSITXCLK_MGT	(0x050)
+#define PRCM_HSIRXCLK_MGT	(0x054)
+#define PRCM_HDMICLK_MGT	(0x058)
+#define PRCM_APEATCLK_MGT	(0x05C)
+#define PRCM_APETRACECLK_MGT	(0x060)
+#define PRCM_MCDECLK_MGT	(0x064)
+#define PRCM_IPI2CCLK_MGT	(0x068)
+#define PRCM_DSIALTCLK_MGT	(0x06C)
+#define PRCM_DMACLK_MGT		(0x074)
+#define PRCM_B2R2CLK_MGT	(0x078)
+#define PRCM_TVCLK_MGT		(0x07C)
+#define PRCM_UNIPROCLK_MGT	(0x278)
+#define PRCM_SSPCLK_MGT		(0x280)
+#define PRCM_RNGCLK_MGT		(0x284)
+#define PRCM_UICCCLK_MGT	(0x27C)
+#define PRCM_MSP1CLK_MGT	(0x288)
+
+#define PRCM_ARM_PLLDIVPS	(prcmu_base + 0x118)
 #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE		0x3f
 #define PRCM_ARM_PLLDIVPS_MAX_MASK		0xf
 
-#define PRCM_PLLARM_LOCKP       (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP       (prcmu_base + 0x0a8)
 #define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3	0x2
 
-#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ	(prcmu_base + 0x114)
 #define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ	BIT(0)
 #define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL	BIT(16)
 
-#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE	(prcmu_base + 0x98)
 #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE	0x1
 #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON	0x100
 
-#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
-#define PRCM_A9PL_FORCE_CLKEN	(_PRCMU_BASE + 0x19C)
-#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+#define PRCM_ARMCLKFIX_MGT	(prcmu_base + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN	(prcmu_base + 0x19C)
+#define PRCM_A9_RESETN_CLR	(prcmu_base + 0x1f4)
+#define PRCM_A9_RESETN_SET	(prcmu_base + 0x1f0)
+#define PRCM_ARM_LS_CLAMP	(prcmu_base + 0x30c)
+#define PRCM_SRAM_A9		(prcmu_base + 0x308)
 
 #define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
 #define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
 
-/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
-#define PRCM_ARM_WFI_STANDBY_WFI0               0x08
-#define PRCM_ARM_WFI_STANDBY_WFI1               0x10
-#define PRCM_IOCR		(_PRCMU_BASE + 0x310)
-#define PRCM_IOCR_IOFORCE			0x1
-
 /* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
-
-/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
-#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ	0x1
-
-#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define PRCM_MBOX_CPU_VAL	(prcmu_base + 0x0fc)
+#define PRCM_MBOX_CPU_SET	(prcmu_base + 0x100)
+#define PRCM_MBOX_CPU_CLR	(prcmu_base + 0x104)
+
+#define PRCM_HOSTACCESS_REQ	(prcmu_base + 0x334)
 #define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
 #define PRCM_HOSTACCESS_REQ_WAKE_REQ	BIT(16)
 #define ARM_WAKEUP_MODEM	0x1
 
-#define PRCM_ARM_IT1_CLR	(_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
+#define PRCM_ARM_IT1_CLR	(prcmu_base + 0x48C)
+#define PRCM_ARM_IT1_VAL	(prcmu_base + 0x494)
+#define PRCM_HOLD_EVT		(prcmu_base + 0x174)
 
-#define PRCM_MOD_AWAKE_STATUS	(_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS	(prcmu_base + 0x4A0)
 #define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE	BIT(0)
 #define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE	BIT(1)
 #define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO	BIT(2)
 
-#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
+#define PRCM_ITSTATUS0		(prcmu_base + 0x148)
+#define PRCM_ITSTATUS1		(prcmu_base + 0x150)
+#define PRCM_ITSTATUS2		(prcmu_base + 0x158)
+#define PRCM_ITSTATUS3		(prcmu_base + 0x160)
+#define PRCM_ITSTATUS4		(prcmu_base + 0x168)
+#define PRCM_ITSTATUS5		(prcmu_base + 0x484)
+#define PRCM_ITCLEAR5		(prcmu_base + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT	(prcmu_base + 0x1018)
 
 /* System reset register */
-#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
+#define PRCM_APE_SOFTRST	(prcmu_base + 0x228)
 
 /* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+#define PRCM_MMIP_LS_CLAMP_SET     (prcmu_base + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (prcmu_base + 0x424)
 
 #define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP		BIT(11)
 #define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI	BIT(22)
 
 /* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLSOC0_FREQ	   (_PRCMU_BASE + 0x080)
-#define PRCM_PLLSOC1_FREQ	   (_PRCMU_BASE + 0x084)
-#define PRCM_PLLARM_FREQ	   (_PRCMU_BASE + 0x088)
-#define PRCM_PLLDDR_FREQ	   (_PRCMU_BASE + 0x08C)
+#define PRCM_PLLSOC0_FREQ	   (prcmu_base + 0x080)
+#define PRCM_PLLSOC1_FREQ	   (prcmu_base + 0x084)
+#define PRCM_PLLARM_FREQ	   (prcmu_base + 0x088)
+#define PRCM_PLLDDR_FREQ	   (prcmu_base + 0x08C)
 #define PRCM_PLL_FREQ_D_SHIFT	0
 #define PRCM_PLL_FREQ_D_MASK	BITS(0, 7)
 #define PRCM_PLL_FREQ_N_SHIFT	8
@@ -152,14 +126,14 @@
 #define PRCM_PLL_FREQ_SELDIV2	BIT(24)
 #define PRCM_PLL_FREQ_DIV2EN	BIT(25)
 
-#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
-#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
-#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
-#define PRCM_PLLDSI_LOCKP          (_PRCMU_BASE + 0x508)
-#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+#define PRCM_PLLDSI_FREQ           (prcmu_base + 0x500)
+#define PRCM_PLLDSI_ENABLE         (prcmu_base + 0x504)
+#define PRCM_PLLDSI_LOCKP          (prcmu_base + 0x508)
+#define PRCM_DSI_PLLOUT_SEL        (prcmu_base + 0x530)
+#define PRCM_DSITVCLK_DIV          (prcmu_base + 0x52C)
+#define PRCM_PLLDSI_LOCKP          (prcmu_base + 0x508)
+#define PRCM_APE_RESETN_SET        (prcmu_base + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (prcmu_base + 0x1E8)
 
 #define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0)
 
@@ -188,30 +162,30 @@
 
 #define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14)
 
-#define PRCM_CLKOCR		   (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR		   (prcmu_base + 0x1CC)
 #define PRCM_CLKOCR_CLKOUT0_REF_CLK	(1 << 0)
 #define PRCM_CLKOCR_CLKOUT0_MASK	BITS(0, 13)
 #define PRCM_CLKOCR_CLKOUT1_REF_CLK	(1 << 16)
 #define PRCM_CLKOCR_CLKOUT1_MASK	BITS(16, 29)
 
 /* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+#define PRCM_EPOD_C_SET            (prcmu_base + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (prcmu_base + 0x304)
 
 /* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+#define PRCM_POWER_STATE_SET       (prcmu_base + 0x254)
 
 /* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
-#define PRCM_GPIOCR                (_PRCMU_BASE + 0x138)
+#define PRCM_DSI_SW_RESET          (prcmu_base + 0x324)
+#define PRCM_GPIOCR                (prcmu_base + 0x138)
 #define PRCM_GPIOCR_DBG_STM_MOD_CMD1            0x800
 #define PRCM_GPIOCR_DBG_UARTMOD_CMD0            0x1
 
 /* PRCMU HW semaphore */
-#define PRCM_SEM                   (_PRCMU_BASE + 0x400)
+#define PRCM_SEM                   (prcmu_base + 0x400)
 #define PRCM_SEM_PRCM_SEM BIT(0)
 
-#define PRCM_TCR                   (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR                   (prcmu_base + 0x1C8)
 #define PRCM_TCR_TENSEL_MASK       BITS(0, 7)
 #define PRCM_TCR_STOP_TIMERS       BIT(16)
 #define PRCM_TCR_DOZE_MODE         BIT(17)
@@ -239,15 +213,15 @@
 /* GPIOCR register */
 #define PRCM_GPIOCR_SPI2_SELECT BIT(23)
 
-#define PRCM_DDR_SUBSYS_APE_MINBW	(_PRCMU_BASE + 0x438)
-#define PRCM_CGATING_BYPASS		(_PRCMU_BASE + 0x134)
+#define PRCM_DDR_SUBSYS_APE_MINBW	(prcmu_base + 0x438)
+#define PRCM_CGATING_BYPASS		(prcmu_base + 0x134)
 #define PRCM_CGATING_BYPASS_ICN2	BIT(6)
 
 /* Miscellaneous unit registers */
-#define PRCM_RESOUTN_SET		(_PRCMU_BASE + 0x214)
-#define PRCM_RESOUTN_CLR		(_PRCMU_BASE + 0x218)
+#define PRCM_RESOUTN_SET		(prcmu_base + 0x214)
+#define PRCM_RESOUTN_CLR		(prcmu_base + 0x218)
 
 /* System reset register */
-#define PRCM_APE_SOFTRST		(_PRCMU_BASE + 0x228)
+#define PRCM_APE_SOFTRST		(prcmu_base + 0x228)
 
 #endif /* __DB8500_PRCMU_REGS_H */

include/linux/mfd/db8500-prcmu.h

@@ -489,7 +489,7 @@ struct prcmu_auto_pm_config {
 
 #ifdef CONFIG_MFD_DB8500_PRCMU
 
-void db8500_prcmu_early_init(void);
+void db8500_prcmu_early_init(u32 phy_base, u32 size);
 int prcmu_set_rc_a2p(enum romcode_write);
 enum romcode_read prcmu_get_rc_p2a(void);
 enum ap_pwrst prcmu_get_xp70_current_state(void);
@@ -522,12 +522,6 @@ int db8500_prcmu_load_a9wdog(u8 id, u32 val);
 void db8500_prcmu_system_reset(u16 reset_code);
 int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
 u8 db8500_prcmu_get_power_state_result(void);
-int db8500_prcmu_gic_decouple(void);
-int db8500_prcmu_gic_recouple(void);
-int db8500_prcmu_copy_gic_settings(void);
-bool db8500_prcmu_gic_pending_irq(void);
-bool db8500_prcmu_pending_irq(void);
-bool db8500_prcmu_is_cpu_in_wfi(int cpu);
 void db8500_prcmu_enable_wakeups(u32 wakeups);
 int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
 int db8500_prcmu_request_clock(u8 clock, bool enable);
@@ -553,7 +547,7 @@ void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
 
 #else /* !CONFIG_MFD_DB8500_PRCMU */
 
-static inline void db8500_prcmu_early_init(void) {}
+static inline void db8500_prcmu_early_init(u32 phy_base, u32 size) {}
 
 static inline int prcmu_set_rc_a2p(enum romcode_write code)
 {

include/linux/mfd/dbx500-prcmu.h

@@ -237,6 +237,8 @@ struct prcmu_pdata
 	bool enable_set_ddr_opp;
 	bool enable_ape_opp_100_voltage;
 	struct ab8500_platform_data *ab_platdata;
+	int ab_irq;
+	int irq_base;
 	u32 version_offset;
 	u32 legacy_offset;
 	u32 adt_offset;
@@ -276,9 +278,9 @@ struct prcmu_fw_version {
 
 #if defined(CONFIG_UX500_SOC_DB8500)
 
-static inline void __init prcmu_early_init(void)
+static inline void prcmu_early_init(u32 phy_base, u32 size)
 {
-	return db8500_prcmu_early_init();
+	return db8500_prcmu_early_init(phy_base, size);
 }
 
 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
@@ -293,36 +295,6 @@ static inline u8 prcmu_get_power_state_result(void)
 	return db8500_prcmu_get_power_state_result();
 }
 
-static inline int prcmu_gic_decouple(void)
-{
-	return db8500_prcmu_gic_decouple();
-}
-
-static inline int prcmu_gic_recouple(void)
-{
-	return db8500_prcmu_gic_recouple();
-}
-
-static inline bool prcmu_gic_pending_irq(void)
-{
-	return db8500_prcmu_gic_pending_irq();
-}
-
-static inline bool prcmu_is_cpu_in_wfi(int cpu)
-{
-	return db8500_prcmu_is_cpu_in_wfi(cpu);
-}
-
-static inline int prcmu_copy_gic_settings(void)
-{
-	return db8500_prcmu_copy_gic_settings();
-}
-
-static inline bool prcmu_pending_irq(void)
-{
-	return db8500_prcmu_pending_irq();
-}
-
 static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
 	return db8500_prcmu_set_epod(epod_id, epod_state);
@@ -500,7 +472,7 @@ static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
 }
 #else
 
-static inline void __init prcmu_early_init(void) {}
+static inline void prcmu_early_init(u32 phy_base, u32 size) {}
 
 static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
 	bool keep_ap_pll)

include/linux/platform_data/arm-ux500-pm.h

+/*
+ * Copyright (C) ST-Ericsson SA 2010-2013
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com> for
+ *         ST-Ericsson.
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro.
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ */
+
+#ifndef ARM_UX500_PM_H
+#define ARM_UX500_PM_H
+
+int prcmu_gic_decouple(void);
+int prcmu_gic_recouple(void);
+bool prcmu_gic_pending_irq(void);
+bool prcmu_pending_irq(void);
+bool prcmu_is_cpu_in_wfi(int cpu);
+int prcmu_copy_gic_settings(void);
+void ux500_pm_init(u32 phy_base, u32 size);
+
+#endif /* ARM_UX500_PM_H */