IB/ipoib: Add handling for sending of skb with many frags

IPoIB converts skb-fragments to sge adding 1 extra sge when SG is enabled.
Current codepath assumes that the max number of sge a device support
is at least MAX_SKB_FRAGS+1, there is no interaction with upper layers
to limit number of fragments in an skb if a device suports fewer
sges. The assumptions also lead to requesting a fixed number of sge
when IPoIB creates queue-pairs with SG enabled.

A fallback/slowpath is implemented using skb_linearize to
handle cases where the conversion would result in more sges than supported.
Signed-off-by: NHans Westgaard Ry <hans.westgaard.ry@oracle.com>
Reviewed-by: NHåkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: NWei Lin Guay <wei.lin.guay@oracle.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

drivers/infiniband/ulp/ipoib/ipoib.h

@@ -244,6 +244,7 @@ struct ipoib_cm_tx {
 	unsigned	     tx_tail;
 	unsigned long	     flags;
 	u32		     mtu;
+	unsigned             max_send_sge;
 };
 
 struct ipoib_cm_rx_buf {
@@ -390,6 +391,7 @@ struct ipoib_dev_priv {
 	int	hca_caps;
 	struct ipoib_ethtool_st ethtool;
 	struct timer_list poll_timer;
+	unsigned max_send_sge;
 };
 
 struct ipoib_ah {

drivers/infiniband/ulp/ipoib/ipoib_cm.c

@@ -710,6 +710,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 	struct ipoib_dev_priv *priv = netdev_priv(dev);
 	struct ipoib_tx_buf *tx_req;
 	int rc;
+	unsigned usable_sge = tx->max_send_sge - !!skb_headlen(skb);
 
 	if (unlikely(skb->len > tx->mtu)) {
 		ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
@@ -719,7 +720,23 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_
 		ipoib_cm_skb_too_long(dev, skb, tx->mtu - IPOIB_ENCAP_LEN);
 		return;
 	}
-
+	if (skb_shinfo(skb)->nr_frags > usable_sge) {
+		if (skb_linearize(skb) < 0) {
+			ipoib_warn(priv, "skb could not be linearized\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		/* Does skb_linearize return ok without reducing nr_frags? */
+		if (skb_shinfo(skb)->nr_frags > usable_sge) {
+			ipoib_warn(priv, "too many frags after skb linearize\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+	}
 	ipoib_dbg_data(priv, "sending packet: head 0x%x length %d connection 0x%x\n",
 		       tx->tx_head, skb->len, tx->qp->qp_num);
 
@@ -1031,7 +1048,8 @@ static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ipoib_
 	struct ib_qp *tx_qp;
 
 	if (dev->features & NETIF_F_SG)
-		attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
+		attr.cap.max_send_sge =
+			min_t(u32, priv->ca->attrs.max_sge, MAX_SKB_FRAGS + 1);
 
 	tx_qp = ib_create_qp(priv->pd, &attr);
 	if (PTR_ERR(tx_qp) == -EINVAL) {
@@ -1040,6 +1058,7 @@ static struct ib_qp *ipoib_cm_create_tx_qp(struct net_device *dev, struct ipoib_
 		attr.create_flags &= ~IB_QP_CREATE_USE_GFP_NOIO;
 		tx_qp = ib_create_qp(priv->pd, &attr);
 	}
+	tx->max_send_sge = attr.cap.max_send_sge;
 	return tx_qp;
 }
 

drivers/infiniband/ulp/ipoib/ipoib_ib.c

@@ -538,6 +538,7 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 	struct ipoib_tx_buf *tx_req;
 	int hlen, rc;
 	void *phead;
+	unsigned usable_sge = priv->max_send_sge - !!skb_headlen(skb);
 
 	if (skb_is_gso(skb)) {
 		hlen = skb_transport_offset(skb) + tcp_hdrlen(skb);
@@ -561,6 +562,23 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb,
 		phead = NULL;
 		hlen  = 0;
 	}
+	if (skb_shinfo(skb)->nr_frags > usable_sge) {
+		if (skb_linearize(skb) < 0) {
+			ipoib_warn(priv, "skb could not be linearized\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		/* Does skb_linearize return ok without reducing nr_frags? */
+		if (skb_shinfo(skb)->nr_frags > usable_sge) {
+			ipoib_warn(priv, "too many frags after skb linearize\n");
+			++dev->stats.tx_dropped;
+			++dev->stats.tx_errors;
+			dev_kfree_skb_any(skb);
+			return;
+		}
+	}
 
 	ipoib_dbg_data(priv, "sending packet, length=%d address=%p qpn=0x%06x\n",
 		       skb->len, address, qpn);

drivers/infiniband/ulp/ipoib/ipoib_verbs.c

@@ -206,7 +206,8 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
 		init_attr.create_flags |= IB_QP_CREATE_NETIF_QP;
 
 	if (dev->features & NETIF_F_SG)
-		init_attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
+		init_attr.cap.max_send_sge =
+			min_t(u32, priv->ca->attrs.max_sge, MAX_SKB_FRAGS + 1);
 
 	priv->qp = ib_create_qp(priv->pd, &init_attr);
 	if (IS_ERR(priv->qp)) {
@@ -233,6 +234,8 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca)
 	priv->rx_wr.next = NULL;
 	priv->rx_wr.sg_list = priv->rx_sge;
 
+	priv->max_send_sge = init_attr.cap.max_send_sge;
+
 	return 0;
 
 out_free_send_cq: