提交 766211e7 编写于 作者: C Changhwan Youn 提交者: Kukjin Kim

ARM: S5PV310: Fix on Secondary CPU startup

Following occurs on boot message without this patch.
    CPU1: processor failed to boot
    Brought up 1 CPUs
    SMP: Total of 1 processors activated...

This patch adds SYSRAM mapping for fixing Secondary CPU startup.
    CPU1: Booted secondary processor
    Brought up 2 CPUs
    SMP: Total of 2 processors activated...
Signed-off-by: NChanghwan Youn <chaos.youn@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
上级 3297c2e6
......@@ -45,12 +45,17 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
.pfn = __phys_to_pfn(S5PV310_PA_L2CC),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(S5PV310_PA_SYSRAM),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(S5PV310_PA_CMU),
.length = SZ_128K,
.type = MT_DEVICE,
}
},
};
static void s5pv310_idle(void)
......
......@@ -23,6 +23,8 @@
#include <plat/map-s5p.h>
#define S5PV310_PA_SYSRAM (0x02025000)
#define S5PV310_PA_CHIPID (0x10000000)
#define S5P_PA_CHIPID S5PV310_PA_CHIPID
......
......@@ -187,6 +187,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_INFORM0);
__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
}
}
......@@ -17,6 +17,7 @@
#define S5P_VA_GPIO S3C_ADDR(0x00500000)
#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
#define S5P_VA_SROMC S3C_ADDR(0x01100000)
#define S5P_VA_SYSRAM S3C_ADDR(0x01180000)
#define S5P_VA_COMBINER_BASE S3C_ADDR(0x00600000)
#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册