提交 761da5c8 编写于 作者: T Tom Zanussi 提交者: Linus Torvalds

[PATCH] relayfs: cleanup, change relayfs_file_* to relay_file_*

This patch renames relayfs_file_operations to relay_file_operations, and the
file operations themselves from relayfs_XXX to relay_file_XXX, to make it more
clear that they refer to relay files.
Signed-off-by: NTom Zanussi <zanussi@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 df49af8f
......@@ -247,13 +247,13 @@ int relayfs_remove_dir(struct dentry *dentry)
}
/**
* relayfs_open - open file op for relayfs files
* relay_file_open - open file op for relay files
* @inode: the inode
* @filp: the file
*
* Increments the channel buffer refcount.
*/
static int relayfs_open(struct inode *inode, struct file *filp)
static int relay_file_open(struct inode *inode, struct file *filp)
{
struct rchan_buf *buf = inode->u.generic_ip;
kref_get(&buf->kref);
......@@ -263,26 +263,26 @@ static int relayfs_open(struct inode *inode, struct file *filp)
}
/**
* relayfs_mmap - mmap file op for relayfs files
* relay_file_mmap - mmap file op for relay files
* @filp: the file
* @vma: the vma describing what to map
*
* Calls upon relay_mmap_buf to map the file into user space.
*/
static int relayfs_mmap(struct file *filp, struct vm_area_struct *vma)
static int relay_file_mmap(struct file *filp, struct vm_area_struct *vma)
{
struct rchan_buf *buf = filp->private_data;
return relay_mmap_buf(buf, vma);
}
/**
* relayfs_poll - poll file op for relayfs files
* relay_file_poll - poll file op for relay files
* @filp: the file
* @wait: poll table
*
* Poll implemention.
*/
static unsigned int relayfs_poll(struct file *filp, poll_table *wait)
static unsigned int relay_file_poll(struct file *filp, poll_table *wait)
{
unsigned int mask = 0;
struct rchan_buf *buf = filp->private_data;
......@@ -300,14 +300,14 @@ static unsigned int relayfs_poll(struct file *filp, poll_table *wait)
}
/**
* relayfs_release - release file op for relayfs files
* relay_file_release - release file op for relay files
* @inode: the inode
* @filp: the file
*
* Decrements the channel refcount, as the filesystem is
* no longer using it.
*/
static int relayfs_release(struct inode *inode, struct file *filp)
static int relay_file_release(struct inode *inode, struct file *filp)
{
struct rchan_buf *buf = filp->private_data;
kref_put(&buf->kref, relay_remove_buf);
......@@ -316,11 +316,11 @@ static int relayfs_release(struct inode *inode, struct file *filp)
}
/**
* relayfs_read_consume - update the consumed count for the buffer
* relay_file_read_consume - update the consumed count for the buffer
*/
static void relayfs_read_consume(struct rchan_buf *buf,
size_t read_pos,
size_t bytes_consumed)
static void relay_file_read_consume(struct rchan_buf *buf,
size_t read_pos,
size_t bytes_consumed)
{
size_t subbuf_size = buf->chan->subbuf_size;
size_t n_subbufs = buf->chan->n_subbufs;
......@@ -343,9 +343,9 @@ static void relayfs_read_consume(struct rchan_buf *buf,
}
/**
* relayfs_read_avail - boolean, are there unconsumed bytes available?
* relay_file_read_avail - boolean, are there unconsumed bytes available?
*/
static int relayfs_read_avail(struct rchan_buf *buf, size_t read_pos)
static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos)
{
size_t bytes_produced, bytes_consumed, write_offset;
size_t subbuf_size = buf->chan->subbuf_size;
......@@ -376,16 +376,16 @@ static int relayfs_read_avail(struct rchan_buf *buf, size_t read_pos)
if (bytes_produced == bytes_consumed)
return 0;
relayfs_read_consume(buf, read_pos, 0);
relay_file_read_consume(buf, read_pos, 0);
return 1;
}
/**
* relayfs_read_subbuf_avail - return bytes available in sub-buffer
* relay_file_read_subbuf_avail - return bytes available in sub-buffer
*/
static size_t relayfs_read_subbuf_avail(size_t read_pos,
struct rchan_buf *buf)
static size_t relay_file_read_subbuf_avail(size_t read_pos,
struct rchan_buf *buf)
{
size_t padding, avail = 0;
size_t read_subbuf, read_offset, write_subbuf, write_offset;
......@@ -407,14 +407,14 @@ static size_t relayfs_read_subbuf_avail(size_t read_pos,
}
/**
* relayfs_read_start_pos - find the first available byte to read
* relay_file_read_start_pos - find the first available byte to read
*
* If the read_pos is in the middle of padding, return the
* position of the first actually available byte, otherwise
* return the original value.
*/
static size_t relayfs_read_start_pos(size_t read_pos,
struct rchan_buf *buf)
static size_t relay_file_read_start_pos(size_t read_pos,
struct rchan_buf *buf)
{
size_t read_subbuf, padding, padding_start, padding_end;
size_t subbuf_size = buf->chan->subbuf_size;
......@@ -433,11 +433,11 @@ static size_t relayfs_read_start_pos(size_t read_pos,
}
/**
* relayfs_read_end_pos - return the new read position
* relay_file_read_end_pos - return the new read position
*/
static size_t relayfs_read_end_pos(struct rchan_buf *buf,
size_t read_pos,
size_t count)
static size_t relay_file_read_end_pos(struct rchan_buf *buf,
size_t read_pos,
size_t count)
{
size_t read_subbuf, padding, end_pos;
size_t subbuf_size = buf->chan->subbuf_size;
......@@ -456,7 +456,7 @@ static size_t relayfs_read_end_pos(struct rchan_buf *buf,
}
/**
* relayfs_read - read file op for relayfs files
* relay_file_read - read file op for relay files
* @filp: the file
* @buffer: the userspace buffer
* @count: number of bytes to read
......@@ -465,10 +465,10 @@ static size_t relayfs_read_end_pos(struct rchan_buf *buf,
* Reads count bytes or the number of bytes available in the
* current sub-buffer being read, whichever is smaller.
*/
static ssize_t relayfs_read(struct file *filp,
char __user *buffer,
size_t count,
loff_t *ppos)
static ssize_t relay_file_read(struct file *filp,
char __user *buffer,
size_t count,
loff_t *ppos)
{
struct rchan_buf *buf = filp->private_data;
struct inode *inode = filp->f_dentry->d_inode;
......@@ -477,11 +477,11 @@ static ssize_t relayfs_read(struct file *filp,
void *from;
down(&inode->i_sem);
if(!relayfs_read_avail(buf, *ppos))
if(!relay_file_read_avail(buf, *ppos))
goto out;
read_start = relayfs_read_start_pos(*ppos, buf);
avail = relayfs_read_subbuf_avail(read_start, buf);
read_start = relay_file_read_start_pos(*ppos, buf);
avail = relay_file_read_subbuf_avail(read_start, buf);
if (!avail)
goto out;
......@@ -491,20 +491,20 @@ static ssize_t relayfs_read(struct file *filp,
ret = -EFAULT;
goto out;
}
relayfs_read_consume(buf, read_start, count);
*ppos = relayfs_read_end_pos(buf, read_start, count);
relay_file_read_consume(buf, read_start, count);
*ppos = relay_file_read_end_pos(buf, read_start, count);
out:
up(&inode->i_sem);
return ret;
}
struct file_operations relayfs_file_operations = {
.open = relayfs_open,
.poll = relayfs_poll,
.mmap = relayfs_mmap,
.read = relayfs_read,
struct file_operations relay_file_operations = {
.open = relay_file_open,
.poll = relay_file_poll,
.mmap = relay_file_mmap,
.read = relay_file_read,
.llseek = no_llseek,
.release = relayfs_release,
.release = relay_file_release,
};
static struct super_operations relayfs_ops = {
......@@ -558,13 +558,18 @@ static int __init init_relayfs_fs(void)
static void __exit exit_relayfs_fs(void)
{
unregister_filesystem(&relayfs_fs_type);
}
module_init(init_relayfs_fs)
module_exit(exit_relayfs_fs)
EXPORT_SYMBOL_GPL(relayfs_file_operations);
EXPORT_SYMBOL_GPL(relay_file_operations);
EXPORT_SYMBOL_GPL(relayfs_create_dir);
EXPORT_SYMBOL_GPL(relayfs_remove_dir);
EXPORT_SYMBOL_GPL(relayfs_create_file);
......
......@@ -90,7 +90,7 @@ static struct dentry *create_buf_file_default_callback(const char *filename,
int *is_global)
{
return relayfs_create_file(filename, parent, mode,
&relayfs_file_operations, buf);
&relay_file_operations, buf);
}
/*
......
......@@ -279,10 +279,9 @@ static inline void subbuf_start_reserve(struct rchan_buf *buf,
}
/*
* exported relayfs file operations, fs/relayfs/inode.c
* exported relay file operations, fs/relayfs/inode.c
*/
extern struct file_operations relayfs_file_operations;
extern struct file_operations relay_file_operations;
#endif /* _LINUX_RELAYFS_FS_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册