Documentation: display: fix wrong documentation paths

Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: NRob Herring <robh@kernel.org>

Documentation/devicetree/bindings/display/arm,pl11x.txt

@@ -22,7 +22,7 @@ Required properties:
 
 - clocks: contains phandle and clock specifier pairs for the entries
 	in the clock-names property. See
-	Documentation/devicetree/binding/clock/clock-bindings.txt
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
 
 Optional properties:
 

Documentation/devicetree/bindings/display/bridge/analogix_dp.txt

@@ -33,7 +33,7 @@ Optional properties for dp-controller:
 		in Documentation/devicetree/bindings/media/video-interfaces.txt,
 		please refer to the SoC specific binding document:
 		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
 
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 -------------------------------------------------------------------------------

Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt

@@ -6,7 +6,7 @@ Required properties:
               location and size of the framebuffer memory.
 - clocks    : phandle + clock specifier pair of the FB reference clock.
 - display   : phandle to a display node as described in
-              Documentation/devicetree/bindings/display/display-timing.txt.
+              Documentation/devicetree/bindings/display/panel/display-timing.txt.
               Additionally, the display node has to define properties:
   - bits-per-pixel: Bits per pixel.
   - ac-prescale   : LCD AC bias frequency. This frequency is the required

Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -38,7 +38,7 @@ Optional Properties:
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 
 Example:
 

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes:
 		3 - for parallel output,
 		4 - for write-back interface
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt

@@ -9,7 +9,7 @@ Required properties:
 
 Required nodes:
 - display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/display-timing.txt
+	Documentation/devicetree/bindings/display/panel/display-timing.txt
 	Additional, the display node has to define properties:
 	- bits-per-pixel: Bits per pixel
 	- fsl,pcr: LCDC PCR value

Documentation/devicetree/bindings/display/imx/ldb.txt

@@ -64,7 +64,7 @@ Required properties:
 Optional properties (required if display-timings are used):
  - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/display/display-timing.txt.
+   Documentation/devicetree/bindings/display/panel/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"
                       This describes how the color bits are laid out in the
                       serialized LVDS signal.

Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt

@@ -55,7 +55,7 @@ Required properties (DMA function blocks):
 	"mediatek,<chip>-disp-rdma"
 	"mediatek,<chip>-disp-wdma"
 - larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
 - iommus: Should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.

Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -108,7 +108,7 @@ Optional properties:
 - qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
   regulator is wanted.
 
-[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/graph.txt
 [3] Documentation/devicetree/bindings/media/video-interfaces.txt
 [4] Documentation/devicetree/bindings/display/panel/

Documentation/devicetree/bindings/display/msm/edp.txt

@@ -10,7 +10,7 @@ Required properties:
 - interrupts: The interrupt signal from the eDP block.
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
   * "core_clk"
   * "iface_clk"

Documentation/devicetree/bindings/display/msm/hdmi.txt

@@ -49,7 +49,7 @@ Required properties:
     * "hdmi_tx_l4"
 - power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
-  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - core-vdda-supply: phandle to vdda regulator device node
 
 Example:

Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt

@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [3]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/spi/spi-bus.txt
 [3]: Documentation/devicetree/bindings/media/video-interfaces.txt
 

Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt

@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
 'endpoint' node, according to the bindings defined in [2]. This
 node should describe panel's video bus.
 
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
 [2]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:

Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt

@@ -35,7 +35,7 @@ Optional property for different chips:
 	       Required elements: "grf"
 
 For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
 - phys (required)
 - phy-names (required)
 - hpd-gpios (optional)

Documentation/devicetree/bindings/display/tilcdc/panel.txt

@@ -15,7 +15,7 @@ Required properties:
  - display-timings: typical videomode of lcd panel.  Multiple video modes
    can be listed if the panel supports multiple timings, but the 'native-mode'
    should be the preferred/default resolution.  Refer to
-   Documentation/devicetree/bindings/display/display-timing.txt for display
+   Documentation/devicetree/bindings/display/panel/display-timing.txt for display
    timing binding details.
 
 Optional properties: