mfd: Fix ASIC3 SD Host Controller Configuration size

The size of the TC6380AF SD Host Controller Configuration area is 0x200 bytes (assuming registers are aligned on 32-bit boundaries), not 0x400 bytes. Source: Toshiba TC6380AF Specification sections 4.2 and 4.3.1
Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

drivers/mfd/asic3.c

@@ -856,7 +856,8 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
 
 	/* MMC */
 	asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
-				 mem_sdio->start, 0x400 >> asic->bus_shift);
+				 mem_sdio->start,
+				 ASIC3_SD_CONFIG_SIZE >> asic->bus_shift);
 	if (!asic->tmio_cnf) {
 		ret = -ENOMEM;
 		dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n");

include/linux/mfd/asic3.h

@@ -297,6 +297,7 @@ struct asic3_platform_data {
  *
  *****************************************************************************/
 #define ASIC3_SD_CONFIG_BASE	0x0400 /* Assumes 32 bit addressing */
+#define ASIC3_SD_CONFIG_SIZE	0x0200 /* Assumes 32 bit addressing */
 #define ASIC3_SD_CTRL_BASE	0x1000
 #define ASIC3_SDIO_CTRL_BASE	0x1200