提交 7437e7d3 编写于 作者: L Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  FEC: Fix kernel panic in fec_set_mac_address.
  ipv6: Fix default multicast hops setting.
  net: ep93xx_eth stops receiving packets
  drivers/net/phy: micrel phy driver
  dm9601: fix phy/eeprom write routine
  ppp_generic: handle non-linear skbs when passing them to pppd
  ppp_generic: pull 2 bytes so that PPP_PROTO(skb) is valid
  net: fix compile error due to double return type in SOCK_DEBUG
  net/usb: initiate sync sequence in sierra_net.c driver
  net/usb: remove default in Kconfig for sierra_net driver
  r8169: Fix rtl8169_rx_interrupt()
  e1000e: Fix oops caused by ASPM patch.
  net/sb1250: register mdio bus in probe
  sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4)
  p54pci: fix bugs in p54p_check_tx_ring
......@@ -311,11 +311,6 @@ static int ep93xx_rx(struct net_device *dev, int processed, int budget)
processed++;
}
if (processed) {
wrw(ep, REG_RXDENQ, processed);
wrw(ep, REG_RXSTSENQ, processed);
}
return processed;
}
......@@ -350,6 +345,11 @@ static int ep93xx_poll(struct napi_struct *napi, int budget)
goto poll_some_more;
}
if (rx) {
wrw(ep, REG_RXDENQ, rx);
wrw(ep, REG_RXSTSENQ, rx);
}
return rx;
}
......
......@@ -4633,6 +4633,9 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
reg16 &= ~state;
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
if (!pdev->bus->self)
return;
pos = pci_pcie_cap(pdev->bus->self);
pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, &reg16);
reg16 &= ~state;
......
......@@ -1653,7 +1653,7 @@ fec_set_mac_address(struct net_device *dev, void *p)
(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
fep->hwp + FEC_ADDR_LOW);
writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
fep + FEC_ADDR_HIGH);
fep->hwp + FEC_ADDR_HIGH);
return 0;
}
......
......@@ -88,6 +88,11 @@ config LSI_ET1011C_PHY
---help---
Supports the LSI ET1011C PHY.
config MICREL_PHY
tristate "Driver for Micrel PHYs"
---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs.
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
......
......@@ -20,4 +20,5 @@ obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
/*
* drivers/net/phy/micrel.c
*
* Driver for Micrel PHYs
*
* Author: David J. Choi
*
* Copyright (c) 2010 Micrel, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Support : ksz9021 , vsc8201, ks8001
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/phy.h>
#define PHY_ID_KSZ9021 0x00221611
#define PHY_ID_VSC8201 0x000FC413
#define PHY_ID_KS8001 0x0022161A
static int kszphy_config_init(struct phy_device *phydev)
{
return 0;
}
static struct phy_driver ks8001_driver = {
.phy_id = PHY_ID_KS8001,
.phy_id_mask = 0x00fffff0,
.features = PHY_BASIC_FEATURES,
.flags = PHY_POLL,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.driver = { .owner = THIS_MODULE,},
};
static struct phy_driver vsc8201_driver = {
.phy_id = PHY_ID_VSC8201,
.name = "Micrel VSC8201",
.phy_id_mask = 0x00fffff0,
.features = PHY_BASIC_FEATURES,
.flags = PHY_POLL,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.driver = { .owner = THIS_MODULE,},
};
static struct phy_driver ksz9021_driver = {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000fff10,
.name = "Micrel KSZ9021 Gigabit PHY",
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause,
.flags = PHY_POLL,
.config_init = kszphy_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.driver = { .owner = THIS_MODULE, },
};
static int __init ksphy_init(void)
{
int ret;
ret = phy_driver_register(&ks8001_driver);
if (ret)
goto err1;
ret = phy_driver_register(&vsc8201_driver);
if (ret)
goto err2;
ret = phy_driver_register(&ksz9021_driver);
if (ret)
goto err3;
return 0;
err3:
phy_driver_unregister(&vsc8201_driver);
err2:
phy_driver_unregister(&ks8001_driver);
err1:
return ret;
}
static void __exit ksphy_exit(void)
{
phy_driver_unregister(&ks8001_driver);
phy_driver_unregister(&vsc8201_driver);
phy_driver_unregister(&ksz9021_driver);
}
module_init(ksphy_init);
module_exit(ksphy_exit);
MODULE_DESCRIPTION("Micrel PHY driver");
MODULE_AUTHOR("David J. Choi");
MODULE_LICENSE("GPL");
......@@ -405,6 +405,7 @@ static ssize_t ppp_read(struct file *file, char __user *buf,
DECLARE_WAITQUEUE(wait, current);
ssize_t ret;
struct sk_buff *skb = NULL;
struct iovec iov;
ret = count;
......@@ -448,7 +449,9 @@ static ssize_t ppp_read(struct file *file, char __user *buf,
if (skb->len > count)
goto outf;
ret = -EFAULT;
if (copy_to_user(buf, skb->data, skb->len))
iov.iov_base = buf;
iov.iov_len = count;
if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len))
goto outf;
ret = skb->len;
......@@ -1567,13 +1570,22 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
struct channel *pch = chan->ppp;
int proto;
if (!pch || skb->len == 0) {
if (!pch) {
kfree_skb(skb);
return;
}
proto = PPP_PROTO(skb);
read_lock_bh(&pch->upl);
if (!pskb_may_pull(skb, 2)) {
kfree_skb(skb);
if (pch->ppp) {
++pch->ppp->dev->stats.rx_length_errors;
ppp_receive_error(pch->ppp);
}
goto done;
}
proto = PPP_PROTO(skb);
if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) {
/* put it on the channel queue */
skb_queue_tail(&pch->file.rq, skb);
......@@ -1585,6 +1597,8 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb)
} else {
ppp_do_recv(pch->ppp, skb, pch);
}
done:
read_unlock_bh(&pch->upl);
}
......@@ -1617,7 +1631,8 @@ ppp_input_error(struct ppp_channel *chan, int code)
static void
ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
{
if (pskb_may_pull(skb, 2)) {
/* note: a 0-length skb is used as an error indication */
if (skb->len > 0) {
#ifdef CONFIG_PPP_MULTILINK
/* XXX do channel-level decompression here */
if (PPP_PROTO(skb) == PPP_MP)
......@@ -1625,15 +1640,10 @@ ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
else
#endif /* CONFIG_PPP_MULTILINK */
ppp_receive_nonmp_frame(ppp, skb);
return;
} else {
kfree_skb(skb);
ppp_receive_error(ppp);
}
if (skb->len > 0)
/* note: a 0-length skb is used as an error indication */
++ppp->dev->stats.rx_length_errors;
kfree_skb(skb);
ppp_receive_error(ppp);
}
static void
......
......@@ -1042,14 +1042,14 @@ static void rtl8169_vlan_rx_register(struct net_device *dev,
}
static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
struct sk_buff *skb)
struct sk_buff *skb, int polling)
{
u32 opts2 = le32_to_cpu(desc->opts2);
struct vlan_group *vlgrp = tp->vlgrp;
int ret;
if (vlgrp && (opts2 & RxVlanTag)) {
vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
__vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling);
ret = 0;
} else
ret = -1;
......@@ -1066,7 +1066,7 @@ static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp,
}
static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
struct sk_buff *skb)
struct sk_buff *skb, int polling)
{
return -1;
}
......@@ -4445,12 +4445,20 @@ static inline bool rtl8169_try_rx_copy(struct sk_buff **sk_buff,
return done;
}
/*
* Warning : rtl8169_rx_interrupt() might be called :
* 1) from NAPI (softirq) context
* (polling = 1 : we should call netif_receive_skb())
* 2) from process context (rtl8169_reset_task())
* (polling = 0 : we must call netif_rx() instead)
*/
static int rtl8169_rx_interrupt(struct net_device *dev,
struct rtl8169_private *tp,
void __iomem *ioaddr, u32 budget)
{
unsigned int cur_rx, rx_left;
unsigned int delta, count;
int polling = (budget != ~(u32)0) ? 1 : 0;
cur_rx = tp->cur_rx;
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
......@@ -4512,8 +4520,12 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
skb_put(skb, pkt_size);
skb->protocol = eth_type_trans(skb, dev);
if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
netif_receive_skb(skb);
if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) {
if (likely(polling))
netif_receive_skb(skb);
else
netif_rx(skb);
}
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
......
......@@ -2353,17 +2353,36 @@ static int sbmac_init(struct platform_device *pldev, long long base)
sc->mii_bus = mdiobus_alloc();
if (sc->mii_bus == NULL) {
sbmac_uninitctx(sc);
return -ENOMEM;
err = -ENOMEM;
goto uninit_ctx;
}
sc->mii_bus->name = sbmac_mdio_string;
snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
sc->mii_bus->priv = sc;
sc->mii_bus->read = sbmac_mii_read;
sc->mii_bus->write = sbmac_mii_write;
sc->mii_bus->irq = sc->phy_irq;
for (i = 0; i < PHY_MAX_ADDR; ++i)
sc->mii_bus->irq[i] = SBMAC_PHY_INT;
sc->mii_bus->parent = &pldev->dev;
/*
* Probe PHY address
*/
err = mdiobus_register(sc->mii_bus);
if (err) {
printk(KERN_ERR "%s: unable to register MDIO bus\n",
dev->name);
goto free_mdio;
}
dev_set_drvdata(&pldev->dev, sc->mii_bus);
err = register_netdev(dev);
if (err) {
printk(KERN_ERR "%s.%d: unable to register netdev\n",
sbmac_string, idx);
mdiobus_free(sc->mii_bus);
sbmac_uninitctx(sc);
return err;
goto unreg_mdio;
}
pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name);
......@@ -2379,19 +2398,15 @@ static int sbmac_init(struct platform_device *pldev, long long base)
pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n",
dev->name, base, eaddr);
sc->mii_bus->name = sbmac_mdio_string;
snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
sc->mii_bus->priv = sc;
sc->mii_bus->read = sbmac_mii_read;
sc->mii_bus->write = sbmac_mii_write;
sc->mii_bus->irq = sc->phy_irq;
for (i = 0; i < PHY_MAX_ADDR; ++i)
sc->mii_bus->irq[i] = SBMAC_PHY_INT;
sc->mii_bus->parent = &pldev->dev;
dev_set_drvdata(&pldev->dev, sc->mii_bus);
return 0;
unreg_mdio:
mdiobus_unregister(sc->mii_bus);
dev_set_drvdata(&pldev->dev, NULL);
free_mdio:
mdiobus_free(sc->mii_bus);
uninit_ctx:
sbmac_uninitctx(sc);
return err;
}
......@@ -2417,16 +2432,6 @@ static int sbmac_open(struct net_device *dev)
goto out_err;
}
/*
* Probe PHY address
*/
err = mdiobus_register(sc->mii_bus);
if (err) {
printk(KERN_ERR "%s: unable to register MDIO bus\n",
dev->name);
goto out_unirq;
}
sc->sbm_speed = sbmac_speed_none;
sc->sbm_duplex = sbmac_duplex_none;
sc->sbm_fc = sbmac_fc_none;
......@@ -2457,11 +2462,7 @@ static int sbmac_open(struct net_device *dev)
return 0;
out_unregister:
mdiobus_unregister(sc->mii_bus);
out_unirq:
free_irq(dev->irq, dev);
out_err:
return err;
}
......@@ -2650,9 +2651,6 @@ static int sbmac_close(struct net_device *dev)
phy_disconnect(sc->phy_dev);
sc->phy_dev = NULL;
mdiobus_unregister(sc->mii_bus);
free_irq(dev->irq, dev);
sbdma_emptyring(&(sc->sbm_txdma));
......@@ -2760,6 +2758,7 @@ static int __exit sbmac_remove(struct platform_device *pldev)
unregister_netdev(dev);
sbmac_uninitctx(sc);
mdiobus_unregister(sc->mii_bus);
mdiobus_free(sc->mii_bus);
iounmap(sc->sbm_base);
free_netdev(dev);
......
......@@ -400,7 +400,6 @@ config USB_IPHETH
config USB_SIERRA_NET
tristate "USB-to-WWAN Driver for Sierra Wireless modems"
depends on USB_USBNET
default y
help
Choose this option if you have a Sierra Wireless USB-to-WWAN device.
......
......@@ -240,7 +240,7 @@ static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 valu
goto out;
dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14);
dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
for (i = 0; i < DM_TIMEOUT; i++) {
u8 tmp;
......
......@@ -789,6 +789,9 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
/* prepare sync message from template */
memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
/* initiate the sync sequence */
sierra_net_dosync(dev);
return 0;
}
......
......@@ -246,7 +246,7 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
u32 idx, i;
i = (*index) % ring_limit;
(*index) = idx = le32_to_cpu(ring_control->device_idx[1]);
(*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]);
idx %= ring_limit;
while (i != idx) {
......
......@@ -778,6 +778,7 @@ int sctp_user_addto_chunk(struct sctp_chunk *chunk, int off, int len,
struct iovec *data);
void sctp_chunk_free(struct sctp_chunk *);
void *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data);
void *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data);
struct sctp_chunk *sctp_chunkify(struct sk_buff *,
const struct sctp_association *,
struct sock *);
......
......@@ -74,7 +74,7 @@
printk(KERN_DEBUG msg); } while (0)
#else
/* Validate arguments and do nothing */
static void inline int __attribute__ ((format (printf, 2, 3)))
static inline void __attribute__ ((format (printf, 2, 3)))
SOCK_DEBUG(struct sock *sk, const char *msg, ...)
{
}
......
......@@ -200,7 +200,7 @@ static int inet6_create(struct net *net, struct socket *sock, int protocol,
inet_sk(sk)->pinet6 = np = inet6_sk_generic(sk);
np->hop_limit = -1;
np->mcast_hops = -1;
np->mcast_hops = IPV6_DEFAULT_MCASTHOPS;
np->mc_loop = 1;
np->pmtudisc = IPV6_PMTUDISC_WANT;
np->ipv6only = net->ipv6.sysctl.bindv6only;
......
......@@ -108,7 +108,7 @@ static const struct sctp_paramhdr prsctp_param = {
cpu_to_be16(sizeof(struct sctp_paramhdr)),
};
/* A helper to initialize to initialize an op error inside a
/* A helper to initialize an op error inside a
* provided chunk, as most cause codes will be embedded inside an
* abort chunk.
*/
......@@ -125,6 +125,29 @@ void sctp_init_cause(struct sctp_chunk *chunk, __be16 cause_code,
chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err);
}
/* A helper to initialize an op error inside a
* provided chunk, as most cause codes will be embedded inside an
* abort chunk. Differs from sctp_init_cause in that it won't oops
* if there isn't enough space in the op error chunk
*/
int sctp_init_cause_fixed(struct sctp_chunk *chunk, __be16 cause_code,
size_t paylen)
{
sctp_errhdr_t err;
__u16 len;
/* Cause code constants are now defined in network order. */
err.cause = cause_code;
len = sizeof(sctp_errhdr_t) + paylen;
err.length = htons(len);
if (skb_tailroom(chunk->skb) > len)
return -ENOSPC;
chunk->subh.err_hdr = sctp_addto_chunk_fixed(chunk,
sizeof(sctp_errhdr_t),
&err);
return 0;
}
/* 3.3.2 Initiation (INIT) (1)
*
* This chunk is used to initiate a SCTP association between two
......@@ -1132,6 +1155,24 @@ static struct sctp_chunk *sctp_make_op_error_space(
return retval;
}
/* Create an Operation Error chunk of a fixed size,
* specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT)
* This is a helper function to allocate an error chunk for
* for those invalid parameter codes in which we may not want
* to report all the errors, if the incomming chunk is large
*/
static inline struct sctp_chunk *sctp_make_op_error_fixed(
const struct sctp_association *asoc,
const struct sctp_chunk *chunk)
{
size_t size = asoc ? asoc->pathmtu : 0;
if (!size)
size = SCTP_DEFAULT_MAXSEGMENT;
return sctp_make_op_error_space(asoc, chunk, size);
}
/* Create an Operation Error chunk. */
struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc,
const struct sctp_chunk *chunk,
......@@ -1374,6 +1415,18 @@ void *sctp_addto_chunk(struct sctp_chunk *chunk, int len, const void *data)
return target;
}
/* Append bytes to the end of a chunk. Returns NULL if there isn't sufficient
* space in the chunk
*/
void *sctp_addto_chunk_fixed(struct sctp_chunk *chunk,
int len, const void *data)
{
if (skb_tailroom(chunk->skb) > len)
return sctp_addto_chunk(chunk, len, data);
else
return NULL;
}
/* Append bytes from user space to the end of a chunk. Will panic if
* chunk is not big enough.
* Returns a kernel err value.
......@@ -1977,13 +2030,12 @@ static sctp_ierror_t sctp_process_unk_param(const struct sctp_association *asoc,
* returning multiple unknown parameters.
*/
if (NULL == *errp)
*errp = sctp_make_op_error_space(asoc, chunk,
ntohs(chunk->chunk_hdr->length));
*errp = sctp_make_op_error_fixed(asoc, chunk);
if (*errp) {
sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM,
sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM,
WORD_ROUND(ntohs(param.p->length)));
sctp_addto_chunk(*errp,
sctp_addto_chunk_fixed(*errp,
WORD_ROUND(ntohs(param.p->length)),
param.v);
} else {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册