提交 74182acd 编写于 作者: J Jubin John 提交者: Doug Ledford

staging/rdma/hfi1: Remove multiple blank lines

Remove multiple blank lines to fix checkpatch check:
CHECK: Please don't use multiple blank lines
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
上级 8638b77f
......@@ -986,7 +986,6 @@ static struct flag_table dc8051_info_host_msg_flags[] = {
FLAG_ENTRY0("Link going down", 0x0100),
};
static u32 encoded_size(u32 size);
static u32 chip_to_opa_lstate(struct hfi1_devdata *dd, u32 chip_lstate);
static int set_physical_link_state(struct hfi1_devdata *dd, u64 state);
......@@ -1285,7 +1284,6 @@ static inline u64 read_write_csr(const struct hfi1_devdata *dd, u32 csr,
{
u64 ret;
if (mode == CNTR_MODE_R) {
ret = read_csr(dd, csr);
} else if (mode == CNTR_MODE_W) {
......@@ -10748,7 +10746,6 @@ int set_buffer_control(struct hfi1_pportdata *ppd,
#define valid_vl(idx) ((idx) < TXE_NUM_DATA_VL || (idx) == 15)
#define NUM_USABLE_VLS 16 /* look at VL15 and less */
/* find the new total credits, do sanity check on unused VLs */
for (i = 0; i < OPA_MAX_VLS; i++) {
if (valid_vl(i)) {
......@@ -11891,7 +11888,6 @@ static int init_cntrs(struct hfi1_devdata *dd)
if (!dd->scntrs)
goto bail;
/* allocate space for the counter names */
dd->cntrnameslen = sz;
dd->cntrnames = kmalloc(sz, GFP_KERNEL);
......@@ -12060,7 +12056,6 @@ static int init_cntrs(struct hfi1_devdata *dd)
return -ENOMEM;
}
static u32 chip_to_opa_lstate(struct hfi1_devdata *dd, u32 chip_lstate)
{
switch (chip_lstate) {
......@@ -14282,7 +14277,6 @@ static u16 delay_cycles(struct hfi1_pportdata *ppd, u32 desired_egress_rate,
return (u16)delta_cycles;
}
/**
* create_pbc - build a pbc for transmission
* @flags: special case flags or-ed in built pbc
......
......@@ -102,7 +102,6 @@ do { \
pr_warn("create of %s failed\n", name); \
} while (0)
#define DEBUGFS_SEQ_FILE_CREATE(name, parent, data) \
DEBUGFS_FILE_CREATE(#name, parent, data, &_##name##_file_ops, S_IRUGO)
......@@ -127,7 +126,6 @@ static void *_opcode_stats_seq_next(struct seq_file *s, void *v, loff_t *pos)
return pos;
}
static void _opcode_stats_seq_stop(struct seq_file *s, void *v)
__releases(RCU)
{
......@@ -308,7 +306,6 @@ static void *_sdes_seq_next(struct seq_file *s, void *v, loff_t *pos)
return pos;
}
static void _sdes_seq_stop(struct seq_file *s, void *v)
__releases(RCU)
{
......
......@@ -162,7 +162,6 @@ enum mmap_types {
#define dbg(fmt, ...) \
pr_info(fmt, ##__VA_ARGS__)
static inline int is_valid_mmap(u64 token)
{
return (HFI1_MMAP_TOKEN_GET(MAGIC, token) == HFI1_MMAP_MAGIC);
......@@ -1589,7 +1588,6 @@ static loff_t ui_lseek(struct file *filp, loff_t offset, int whence)
return filp->f_pos;
}
/* NOTE: assumes unsigned long is 8 bytes */
static ssize_t ui_read(struct file *filp, char __user *buf, size_t count,
loff_t *f_pos)
......
......@@ -878,7 +878,6 @@ struct hfi1_devdata {
wait_queue_head_t sdma_unfreeze_wq;
atomic_t sdma_unfreeze_count;
/* hfi1_pportdata, points to array of (physical) port-specific
* data structs, indexed by pidx (0..n-1)
*/
......@@ -1598,7 +1597,6 @@ static inline struct cc_state *get_cc_state(struct hfi1_pportdata *ppd)
/* IB dword length mask in PBC (lower 11 bits); same for all chips */
#define HFI1_PBC_LENGTH_MASK ((1 << 11) - 1)
/* ctxt_flag bit offsets */
/* context has been setup */
#define HFI1_CTXT_SETUP_DONE 1
......
......@@ -1723,7 +1723,6 @@ int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd)
rcd->ctxt, rcd->egrbufs.alloced, rcd->egrbufs.rcvtid_size,
rcd->egrbufs.size);
/*
* Set the contexts rcv array head update threshold to the closest
* power of 2 (so we can use a mask instead of modulo) below half
......
......@@ -179,7 +179,6 @@ void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup)
signal_ib_event(ppd, ev);
}
}
/*
......
......@@ -2310,7 +2310,6 @@ static void a0_portstatus(struct hfi1_pportdata *ppd,
}
}
static int pma_get_opa_portstatus(struct opa_pma_mad *pmp,
struct ib_device *ibdev, u8 port, u32 *resp_len)
{
......
......@@ -235,7 +235,6 @@ struct ib_pma_portcounters_cong {
#define IB_CC_SVCTYPE_RD 0x2
#define IB_CC_SVCTYPE_UD 0x3
/*
* There should be an equivalent IB #define for the following, but
* I cannot find it.
......
......@@ -447,7 +447,6 @@ void restore_pci_variables(struct hfi1_devdata *dd)
pci_write_config_dword(dd->pcidev, PCIE_CFG_TPH2, dd->pci_tph2);
}
/*
* BIOS may not set PCIe bus-utilization parameters for best performance.
* Check and optionally adjust them to maximize our throughput.
......
......@@ -852,7 +852,6 @@ struct send_context *sc_alloc(struct hfi1_devdata *dd, int type,
sc->credit_ctrl,
thresh);
return sc;
}
......
......@@ -50,7 +50,6 @@
*
*/
/* send context types */
#define SC_KERNEL 0
#define SC_ACK 1
......@@ -318,7 +317,6 @@ void pio_kernel_unfreeze(struct hfi1_devdata *dd);
void __cm_reset(struct hfi1_devdata *dd, u64 sendctrl);
void pio_send_control(struct hfi1_devdata *dd, int op);
/* PIO copy routines */
void pio_copy(struct hfi1_devdata *dd, struct pio_buf *pbuf, u64 pbc,
const void *from, size_t count);
......
......@@ -609,7 +609,6 @@ static void sdma_sw_clean_up_task(unsigned long opaque)
* descq are ours to play with.
*/
/*
* In the error clean up sequence, software clean must be called
* before the hardware clean so we can use the hardware head in
......@@ -1690,7 +1689,6 @@ static void set_sdma_integrity(struct sdma_engine *sde)
write_sde_csr(sde, SD(CHECK_ENABLE), reg);
}
static void init_sdma_regs(
struct sdma_engine *sde,
u32 credits,
......
......@@ -65,7 +65,6 @@
/* Hardware limit for SDMA packet size */
#define MAX_SDMA_PKT_SIZE ((16 * 1024) - 1)
#define SDMA_TXREQ_S_OK 0
#define SDMA_TXREQ_S_SENDERROR 1
#define SDMA_TXREQ_S_ABORTED 2
......@@ -418,7 +417,6 @@ struct sdma_engine {
struct list_head flushlist;
};
int sdma_init(struct hfi1_devdata *dd, u8 port);
void sdma_start(struct hfi1_devdata *dd);
void sdma_exit(struct hfi1_devdata *dd);
......@@ -464,7 +462,6 @@ static inline int __sdma_running(struct sdma_engine *engine)
return engine->state.current_state == sdma_state_s99_running;
}
/**
* sdma_running() - state suitability test
* @engine: sdma engine
......@@ -494,7 +491,6 @@ void _sdma_txreq_ahgadd(
u32 *ahg,
u8 ahg_hlen);
/**
* sdma_txinit_ahg() - initialize an sdma_txreq struct with AHG
* @tx: tx request to initialize
......
......@@ -53,7 +53,6 @@
#include "mad.h"
#include "trace.h"
/*
* Start of per-port congestion control structures and support code
*/
......@@ -254,7 +253,6 @@ HFI1_SC2VL_ATTR(29);
HFI1_SC2VL_ATTR(30);
HFI1_SC2VL_ATTR(31);
static struct attribute *sc2vl_default_attributes[] = {
&hfi1_sc2vl_attr_0.attr,
&hfi1_sc2vl_attr_1.attr,
......@@ -360,7 +358,6 @@ HFI1_SL2SC_ATTR(29);
HFI1_SL2SC_ATTR(30);
HFI1_SL2SC_ATTR(31);
static struct attribute *sl2sc_default_attributes[] = {
&hfi1_sl2sc_attr_0.attr,
&hfi1_sl2sc_attr_1.attr,
......@@ -493,7 +490,6 @@ static struct kobj_type hfi1_vl2mtu_ktype = {
.default_attrs = vl2mtu_default_attributes
};
/* end of per-port file structures and support code */
/*
......@@ -535,7 +531,6 @@ static ssize_t show_boardversion(struct device *device,
return scnprintf(buf, PAGE_SIZE, "%s", dd->boardversion);
}
static ssize_t show_nctxts(struct device *device,
struct device_attribute *attr, char *buf)
{
......@@ -702,7 +697,6 @@ int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num,
}
kobject_uevent(&ppd->vl2mtu_kobj, KOBJ_ADD);
ret = kobject_init_and_add(&ppd->pport_cc_kobj, &port_cc_ktype,
kobj, "CCMgtA");
if (ret) {
......
......@@ -380,7 +380,6 @@ const char *parse_sdma_flags(
#define __parse_sdma_flags(desc0, desc1) parse_sdma_flags(p, desc0, desc1)
#define lrh_name(lrh) { HFI1_##lrh, #lrh }
#define show_lnh(lrh) \
__print_symbolic(lrh, \
......@@ -427,7 +426,6 @@ __print_symbolic(opcode, \
ib_opcode_name(UD_SEND_ONLY_WITH_IMMEDIATE), \
ib_opcode_name(CNP))
#define LRH_PRN "vl %d lver %d sl %d lnh %d,%s dlid %.4x len %d slid %.4x"
#define BTH_PRN \
"op 0x%.2x,%s se %d m %d pad %d tver %d pkey 0x%.4x " \
......@@ -563,7 +561,6 @@ DEFINE_EVENT(hfi1_ibhdr_template, output_ibhdr,
#undef TRACE_SYSTEM
#define TRACE_SYSTEM hfi1_snoop
TRACE_EVENT(snoop_capture,
TP_PROTO(struct hfi1_devdata *dd,
int hdr_len,
......@@ -760,7 +757,6 @@ DECLARE_EVENT_CLASS(hfi1_bct_template,
)
);
DEFINE_EVENT(hfi1_bct_template, bct_set,
TP_PROTO(struct hfi1_devdata *dd, struct buffer_control *bc),
TP_ARGS(dd, bc));
......
......@@ -65,5 +65,4 @@ int hfi1_twsi_blk_rd(struct hfi1_devdata *dd, u32 target, int dev, int addr,
int hfi1_twsi_blk_wr(struct hfi1_devdata *dd, u32 target, int dev, int addr,
const void *buffer, int len);
#endif /* _TWSI_H */
......@@ -647,7 +647,6 @@ static int opa_smp_check(struct hfi1_ibport *ibp, u16 pkey, u8 sc5,
return 0;
}
/**
* hfi1_ud_rcv - receive an incoming UD packet
* @ibp: the port the packet came in on
......
......@@ -376,7 +376,6 @@ static inline int qp_ok(int opcode, struct hfi1_packet *packet)
return 0;
}
/**
* hfi1_ib_rcv - process an incoming packet
* @packet: data packet information
......@@ -965,7 +964,6 @@ static inline int egress_pkey_check(struct hfi1_pportdata *ppd,
if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK))
goto bad;
/* Is the pkey = 0x0, or 0x8000? */
if ((pkey & PKEY_LOW_15_MASK) == 0)
goto bad;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册