提交 740dc9c4 编写于 作者: M Misha Zhilin 提交者: Jaroslav Kysela

ALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI card

Added support for Terrasoniq/MUSONIK TS22 PCI card.
Signed-off-by: NMisha Zhilin <misha@epiphan.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
上级 f90c06a2
......@@ -120,6 +120,7 @@ static int __devinit phase22_init(struct snd_ice1712 *ice)
// Configure DAC/ADC description for generic part of ice1724
switch (ice->eeprom.subvendor) {
case VT1724_SUBDEVICE_PHASE22:
case VT1724_SUBDEVICE_TS22:
ice->num_total_dacs = 2;
ice->num_total_adcs = 2;
ice->vt1720 = 1; // Envy24HT-S have 16 bit wide GPIO
......@@ -136,6 +137,7 @@ static int __devinit phase22_init(struct snd_ice1712 *ice)
ice->akm_codecs = 1;
switch (ice->eeprom.subvendor) {
case VT1724_SUBDEVICE_PHASE22:
case VT1724_SUBDEVICE_TS22:
if ((err = snd_ice1712_akm4xxx_init(ak, &akm_phase22, &akm_phase22_priv, ice)) < 0)
return err;
break;
......@@ -150,6 +152,7 @@ static int __devinit phase22_add_controls(struct snd_ice1712 *ice)
switch (ice->eeprom.subvendor) {
case VT1724_SUBDEVICE_PHASE22:
case VT1724_SUBDEVICE_TS22:
err = snd_ice1712_akm4xxx_build_controls(ice);
if (err < 0)
return err;
......@@ -904,5 +907,14 @@ struct snd_ice1712_card_info snd_vt1724_phase_cards[] __devinitdata = {
.eeprom_size = sizeof(phase28_eeprom),
.eeprom_data = phase28_eeprom,
},
{
.subvendor = VT1724_SUBDEVICE_TS22,
.name = "Terrasoniq TS22 PCI",
.model = "TS22",
.chip_init = phase22_init,
.build_controls = phase22_add_controls,
.eeprom_size = sizeof(phase22_eeprom),
.eeprom_data = phase22_eeprom,
},
{ } /* terminator */
};
......@@ -25,10 +25,12 @@
*/
#define PHASE_DEVICE_DESC "{Terratec,Phase 22},"\
"{Terratec,Phase 28},"
"{Terratec,Phase 28},"\
"{Terrasoniq,TS22},"
#define VT1724_SUBDEVICE_PHASE22 0x3b155011
#define VT1724_SUBDEVICE_PHASE28 0x3b154911
#define VT1724_SUBDEVICE_TS22 0x3b157b11
/* entry point */
extern struct snd_ice1712_card_info snd_vt1724_phase_cards[];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册