提交 73c59afc 编写于 作者: M Muli Ben-Yehuda 提交者: Linus Torvalds

finish i386 and x86-64 sysdata conversion

This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully
also fixes Riku's and Andy's observed bugs.  It is based on Yinghai Lu's
and Andy Whitcroft's patches (thanks!) with some changes:

- introduce pci_scan_bus_with_sysdata() and use it instead of
  pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will
  allocate the sysdata structure and then call pci_scan_bus().
- always allocate pci_sysdata dynamically. The whole point of this
  sysdata work is to make it easy to do root-bus specific things
  (e.g., support PCI domains and IOMMU's). I dislike using a default
  struct pci_sysdata in some places and a dynamically allocated
  pci_sysdata elsewhere - the potential for someone indavertantly
  changing the default structure is too high.
- this patch only makes the minimal changes necessary, i.e., the NUMA node is
  always initialized to -1. Patches to do the right thing with regards
  to the NUMA node can build on top of this (either add a 'node'
  parameter to pci_scan_bus_with_sysdata() or just update the node
  when it becomes known).

The patch was compile tested with various configurations (e.g., NUMAQ,
VISWS) and run-time tested on i386 and x86-64.  Unfortunately none of my
machines exhibited the bugs so caveat emptor.

Andy, could you please see if this fixes the NUMA issues you've seen?
Riku, does this fix "pci=noacpi" on your laptop?
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: <riku.seppala@kymp.net>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 f0b85c0c
......@@ -455,3 +455,26 @@ void pcibios_disable_device (struct pci_dev *dev)
if (!dev->msi_enabled && pcibios_disable_irq)
pcibios_disable_irq(dev);
}
struct pci_bus *pci_scan_bus_with_sysdata(int busno)
{
struct pci_bus *bus = NULL;
struct pci_sysdata *sd;
/*
* Allocate per-root-bus (not per bus) arch-specific data.
* TODO: leak; this memory is never freed.
* It's arguable whether it's worth the trouble to care.
*/
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
if (!sd) {
printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
return NULL;
}
sd->node = -1;
bus = pci_scan_bus(busno, &pci_root_ops, sd);
if (!bus)
kfree(sd);
return bus;
}
......@@ -25,9 +25,9 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
pci_read_config_byte(d, reg++, &subb);
DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
if (busno)
pci_scan_bus(busno, &pci_root_ops, NULL); /* Bus A */
pci_scan_bus_with_sysdata(busno); /* Bus A */
if (suba < subb)
pci_scan_bus(suba+1, &pci_root_ops, NULL); /* Bus B */
pci_scan_bus_with_sysdata(suba+1); /* Bus B */
}
pcibios_last_bus = -1;
}
......@@ -42,7 +42,7 @@ static void __devinit pci_fixup_i450gx(struct pci_dev *d)
u8 busno;
pci_read_config_byte(d, 0x4a, &busno);
printk(KERN_INFO "PCI: i440KX/GX host bridge %s: secondary bus %02x\n", pci_name(d), busno);
pci_scan_bus(busno, &pci_root_ops, NULL);
pci_scan_bus_with_sysdata(busno);
pcibios_last_bus = -1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
......
......@@ -138,8 +138,9 @@ static void __init pirq_peer_trick(void)
for(i = 1; i < 256; i++) {
if (!busmap[i] || pci_find_bus(0, i))
continue;
if (pci_scan_bus(i, &pci_root_ops, NULL))
printk(KERN_INFO "PCI: Discovered primary peer bus %02x [IRQ]\n", i);
if (pci_scan_bus_with_sysdata(i))
printk(KERN_INFO "PCI: Discovered primary peer "
"bus %02x [IRQ]\n", i);
}
pcibios_last_bus = -1;
}
......
......@@ -26,7 +26,7 @@ static void __devinit pcibios_fixup_peer_bridges(void)
l != 0x0000 && l != 0xffff) {
DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l);
printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n);
pci_scan_bus(n, &pci_root_ops, NULL);
pci_scan_bus_with_sysdata(n);
break;
}
}
......
......@@ -96,10 +96,14 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
pci_read_config_byte(d, reg++, &suba);
pci_read_config_byte(d, reg++, &subb);
DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
if (busno)
pci_scan_bus(QUADLOCAL2BUS(quad,busno), &pci_root_ops, NULL); /* Bus A */
if (suba < subb)
pci_scan_bus(QUADLOCAL2BUS(quad,suba+1), &pci_root_ops, NULL); /* Bus B */
if (busno) {
/* Bus A */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
}
if (suba < subb) {
/* Bus B */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
}
}
pcibios_last_bus = -1;
}
......@@ -123,8 +127,7 @@ static int __init pci_numa_init(void)
continue;
printk("Scanning PCI bus %d for quad %d\n",
QUADLOCAL2BUS(quad,0), quad);
pci_scan_bus(QUADLOCAL2BUS(quad,0),
&pci_root_ops, NULL);
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
}
return 0;
}
......
......@@ -101,8 +101,8 @@ static int __init pcibios_init(void)
"bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
raw_pci_ops = &pci_direct_conf1;
pci_scan_bus(pci_bus0, &pci_root_ops, NULL);
pci_scan_bus(pci_bus1, &pci_root_ops, NULL);
pci_scan_bus_with_sysdata(pci_bus0);
pci_scan_bus_with_sysdata(pci_bus1);
pci_fixup_irqs(visws_swizzle, visws_map_irq);
pcibios_resource_survey();
return 0;
......
......@@ -8,6 +8,9 @@ struct pci_sysdata {
int node; /* NUMA node */
};
/* scan a bus after allocating a pci_sysdata for it */
extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
#include <linux/mm.h> /* for struct page */
/* Can be used to override the logic in pci_scan_bus for skipping
......
......@@ -10,6 +10,8 @@ struct pci_sysdata {
void* iommu; /* IOMMU private data */
};
extern struct pci_bus *pci_scan_bus_with_sysdata(int busno);
#ifdef CONFIG_CALGARY_IOMMU
static inline void* pci_iommu(struct pci_bus *bus)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册