Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 72558dde 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits)
  ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
  scc_pata: kill unused variables
  sgiioc4: kill duplicate ioremap()
  sgiioc4: kill useless address checks
  delkin_cb: add PM support
  ide: remove broken hpt34x driver
  ide-floppy: remove idefloppy_floppy_t typedef
  sgiioc4: remove maskproc() method
  hpt366: cleanup maskproc() method
  ide: mask interrupt in ide_config_drive_speed()
  hpt366: fix compile warning
  ide: remove unused macros from <asm-parisc/ide.h>
  ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h>
  ide: remove dead <asm-arm/arch-sa1100/ide.h>
  ide: fix support for IDE PCI controllers using MMIO on frv
  ide-cd: remove stale comment
  ide-cd: small drive type print fix
  ide-cd: debug log enhancements
  ide: add generic ATA/ATAPI disk driver
  ide: allow device drivers to specify per-device type /proc settings
  ...
上级 b9138523 769b49ce
隐藏空白更改
内联 并排
Showing with 815 addition and 1171 deletion
arch/arm/mach-sa1100/include/mach/ide.h 已删除 100644 → 0
浏览文件 @ b9138523
/*
* arch/arm/mach-sa1100/include/mach/ide.h
*
* Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
*
* 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
* Get rid of the special ide_init_hwif_ports() functions
* and make a generalised function that can be used by all
* architectures.
*/
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#error "This code is broken and needs update to match with current ide support"
/*
* Set up a hw structure for a specified data port, control port and IRQ.
* This should follow whatever the default interface uses.
*/
static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
unsigned long ctrl_port, int *irq)
{
unsigned long reg = data_port;
int i;
int regincr = 1;
/* The Empeg board has the first two address lines unused */
if (machine_is_empeg())
regincr = 1 << 2;
/* The LART doesn't use A0 for IDE */
if (machine_is_lart())
regincr = 1 << 1;
memset(hw, 0, sizeof(*hw));
for (i = 0; i <= 7; i++) {
hw->io_ports_array[i] = reg;
reg += regincr;
}
hw->io_ports.ctl_addr = ctrl_port;
if (irq)
*irq = 0;
}
/*
* This registers the standard ports for this architecture with the IDE
* driver.
*/
static __inline__ void
ide_init_default_hwifs(void)
{
if (machine_is_lart()) {
#ifdef CONFIG_SA1100_LART
hw_regs_t hw;
/* Enable GPIO as interrupt line */
GPDR &= ~LART_GPIO_IDE;
set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
/* set PCMCIA interface timing */
MECR = 0x00060006;
/* init the interface */
ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
hw.irq = LART_IRQ_IDE;
ide_register_hw(&hw);
#endif
}
}
drivers/ide/Kconfig
浏览文件 @ 72558dde
......@@ -84,21 +84,40 @@ config BLK_DEV_IDE_SATA
If unsure, say N.
config BLK_DEV_IDEDISK
tristate "Include IDE/ATA-2 DISK support"
---help---
This will include enhanced support for MFM/RLL/IDE hard disks. If
you have a MFM/RLL/IDE disk, and there is no special reason to use
the old hard disk driver instead, say Y. If you have an SCSI-only
system, you can say N here.
config IDE_GD
tristate "generic ATA/ATAPI disk support"
default y
help
Support for ATA/ATAPI disks (including ATAPI floppy drives).
To compile this driver as a module, choose M here: the
module will be called ide-disk.
Do not compile this driver as a module if your root file system
(the one containing the directory /) is located on the IDE disk.
To compile this driver as a module, choose M here.
The module will be called ide-gd_mod.
If unsure, say Y.
config IDE_GD_ATA
bool "ATA disk support"
depends on IDE_GD
default y
help
This will include support for ATA hard disks.
If unsure, say Y.
config IDE_GD_ATAPI
bool "ATAPI floppy support"
depends on IDE_GD
select IDE_ATAPI
help
This will include support for ATAPI floppy drives
(i.e. Iomega ZIP or MKE LS-120).
For information about jumper settings and the question
of when a ZIP drive uses a partition table, see
<http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
If unsure, say N.
config BLK_DEV_IDECS
tristate "PCMCIA IDE support"
depends on PCMCIA
......@@ -163,29 +182,6 @@ config BLK_DEV_IDETAPE
To compile this driver as a module, choose M here: the
module will be called ide-tape.
config BLK_DEV_IDEFLOPPY
tristate "Include IDE/ATAPI FLOPPY support"
select IDE_ATAPI
---help---
If you have an IDE floppy drive which uses the ATAPI protocol,
answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
drives, similar to the SCSI protocol.
The LS-120 and the IDE/ATAPI Iomega ZIP drive are also supported by
this driver. For information about jumper settings and the question
of when a ZIP drive uses a partition table, see
<http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
(ATAPI PD-CD/CDR drives are not supported by this driver; support
for PD-CD/CDR drives is available if you answer Y to
"SCSI emulation support", below).
If you say Y here, the FLOPPY drive will be identified along with
other IDE devices, as "hdb" or "hdc", or something similar (check
the boot messages with dmesg).
To compile this driver as a module, choose M here: the
module will be called ide-floppy.
config BLK_DEV_IDESCSI
tristate "SCSI emulation support (DEPRECATED)"
depends on SCSI
......@@ -332,7 +328,7 @@ config IDEPCI_PCIBUS_ORDER
# TODO: split it on per host driver config options (or module parameters)
config BLK_DEV_OFFBOARD
bool "Boot off-board chipsets first support (DEPRECATED)"
depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
help
Normally, IDE controllers built into the motherboard (on-board
controllers) are assigned to ide0 and ide1 while those on add-in PCI
......@@ -482,28 +478,6 @@ config BLK_DEV_CS5535
It is safe to say Y to this question.
config BLK_DEV_HPT34X
tristate "HPT34X chipset support"
depends on BROKEN
select BLK_DEV_IDEDMA_PCI
help
This driver adds up to 4 more EIDE devices sharing a single
interrupt. The HPT343 chipset in its current form is a non-bootable
controller; the HPT345/HPT363 chipset is a bootable (needs BIOS FIX)
PCI UDMA controllers. This driver requires dynamic tuning of the
chipset during the ide-probe at boot time. It is reported to support
DVD II drives, by the manufacturer.
config HPT34X_AUTODMA
bool "HPT34X AUTODMA support (EXPERIMENTAL)"
depends on BLK_DEV_HPT34X && EXPERIMENTAL
help
This is a dangerous thing to attempt currently! Please read the
comments at the top of <file:drivers/ide/pci/hpt34x.c>. If you say Y
here, then say Y to "Use DMA by default when available" as well.
If unsure, say N.
config BLK_DEV_HPT366
tristate "HPT36X/37X chipset support"
select BLK_DEV_IDEDMA_PCI
......
drivers/ide/Makefile
浏览文件 @ 72558dde
......@@ -37,18 +37,25 @@ obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
ide-disk_mod-y += ide-disk.o ide-disk_ioctl.o
ide-gd_mod-y += ide-gd.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o
ifeq ($(CONFIG_IDE_GD_ATA), y)
ide-gd_mod-y += ide-disk.o ide-disk_ioctl.o
ifeq ($(CONFIG_IDE_PROC_FS), y)
ide-disk_mod-y += ide-disk_proc.o
ide-floppy_mod-y += ide-floppy_proc.o
ide-gd_mod-y += ide-disk_proc.o
endif
endif
ifeq ($(CONFIG_IDE_GD_ATAPI), y)
ide-gd_mod-y += ide-floppy.o ide-floppy_ioctl.o
ifeq ($(CONFIG_IDE_PROC_FS), y)
ide-gd_mod-y += ide-floppy_proc.o
endif
endif
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk_mod.o
obj-$(CONFIG_IDE_GD) += ide-gd_mod.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
ifeq ($(CONFIG_BLK_DEV_IDECS), y)
......
drivers/ide/ide-atapi.c
浏览文件 @ 72558dde
......@@ -191,7 +191,7 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
{
struct ide_atapi_pc pc;
if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK)
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
return 0;
ide_init_pc(&pc);
......
drivers/ide/ide-cd.c
浏览文件 @ 72558dde
......@@ -99,7 +99,7 @@ static void ide_cd_put(struct cdrom_info *cd)
/* Mark that we've seen a media change and invalidate our internal buffers. */
static void cdrom_saw_media_change(ide_drive_t *drive)
{
drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
}
......@@ -340,8 +340,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
}
ide_debug_log(IDE_DBG_RQ, "%s: stat: 0x%x, good_stat: 0x%x, "
"rq->cmd_type: 0x%x, err: 0x%x\n", __func__, stat,
good_stat, rq->cmd_type, err);
"rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x\n",
__func__, stat, good_stat, rq->cmd[0], rq->cmd_type, err);
if (blk_sense_request(rq)) {
/*
......@@ -843,13 +843,10 @@ static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq)
rq->q->prep_rq_fn(rq->q, rq);
}
/*
* All other packet commands.
*/
static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct request *rq)
{
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
ide_debug_log(IDE_DBG_FUNC, "Call %s, rq->cmd[0]: 0x%x\n",
__func__, rq->cmd[0]);
/*
* Some of the trailing request sense fields are optional,
......@@ -876,7 +873,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
if (!sense)
sense = &local_sense;
ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
ide_debug_log(IDE_DBG_PC, "Call %s, cmd[0]: 0x%x, write: 0x%x, "
"timeout: %d, cmd_flags: 0x%x\n", __func__, cmd[0], write,
timeout, cmd_flags);
......@@ -1177,8 +1174,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
ide_debug_log(IDE_DBG_RQ, "Call %s, write: 0x%x, secs_per_frame: %u\n",
__func__, write, sectors_per_frame);
ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
"secs_per_frame: %u\n",
__func__, rq->cmd[0], write, sectors_per_frame);
if (write) {
/* disk has become write protected */
......@@ -1221,7 +1219,8 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
{
ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd_type: 0x%x\n", __func__,
ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, "
"rq->cmd_type: 0x%x\n", __func__, rq->cmd[0],
rq->cmd_type);
if (blk_pc_request(rq))
......@@ -1257,9 +1256,6 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
}
}
/*
* cdrom driver request routine.
*/
static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
sector_t block)
{
......@@ -1267,8 +1263,10 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
ide_handler_t *fn;
int xferlen;
ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd_type: 0x%x, block: %llu\n",
__func__, rq->cmd_type, (unsigned long long)block);
ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, "
"rq->cmd_type: 0x%x, block: %llu\n",
__func__, rq->cmd[0], rq->cmd_type,
(unsigned long long)block);
if (blk_fs_request(rq)) {
if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
......@@ -1412,6 +1410,10 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
*capacity = 1 + be32_to_cpu(capbuf.lba);
*sectors_per_frame = blocklen >> SECTOR_BITS;
ide_debug_log(IDE_DBG_PROBE, "%s: cap: %lu, sectors_per_frame: %lu\n",
__func__, *capacity, *sectors_per_frame);
return 0;
}
......@@ -1643,6 +1645,9 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
}
ide_debug_log(IDE_DBG_PROBE, "%s: curspeed: %u, maxspeed: %u\n",
__func__, curspeed, maxspeed);
cd->current_speed = (curspeed + (176/2)) / 176;
cd->max_speed = (maxspeed + (176/2)) / 176;
}
......@@ -1732,7 +1737,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
return 0;
if ((buf[8 + 6] & 0x01) == 0)
drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
if (buf[8 + 6] & 0x08)
drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
if (buf[8 + 3] & 0x01)
......@@ -1777,7 +1782,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
printk(KERN_CONT " DVD%s%s",
(cdi->mask & CDC_DVD_R) ? "" : "-R",
(cdi->mask & CDC_DVD_RAM) ? "" : "-RAM");
(cdi->mask & CDC_DVD_RAM) ? "" : "/RAM");
if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
printk(KERN_CONT " CD%s%s",
......@@ -1908,6 +1913,16 @@ static const struct ide_proc_devset idecd_settings[] = {
IDE_PROC_DEVSET(dsc_overlap, 0, 1),
{ 0 },
};
static ide_proc_entry_t *ide_cd_proc_entries(ide_drive_t *drive)
{
return idecd_proc;
}
static const struct ide_proc_devset *ide_cd_proc_devsets(ide_drive_t *drive)
{
return idecd_settings;
}
#endif
static const struct cd_list_entry ide_cd_quirks_list[] = {
......@@ -1986,8 +2001,8 @@ static int ide_cdrom_setup(ide_drive_t *drive)
if (!drive->queue->unplug_delay)
drive->queue->unplug_delay = 1;
drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
ide_cd_flags(id);
drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
drive->atapi_flags = IDE_AFLAG_NO_EJECT | ide_cd_flags(id);
if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
fw_rev[4] == '1' && fw_rev[6] <= '2')
......@@ -2069,8 +2084,8 @@ static ide_driver_t ide_cdrom_driver = {
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idecd_proc,
.settings = idecd_settings,
.proc_entries = ide_cd_proc_entries,
.proc_devsets = ide_cd_proc_devsets,
#endif
};
......
drivers/ide/ide-cd_ioctl.c
浏览文件 @ 72558dde
......@@ -86,8 +86,8 @@ int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi,
if (slot_nr == CDSL_CURRENT) {
(void) cdrom_check_status(drive, NULL);
retval = (drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED) ? 1 : 0;
drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED;
retval = (drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED) ? 1 : 0;
drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED;
return retval;
} else {
return -EINVAL;
......@@ -136,7 +136,7 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
sense = &my_sense;
/* If the drive cannot lock the door, just pretend. */
if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK) {
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) {
stat = 0;
} else {
unsigned char cmd[BLK_MAX_CDB];
......@@ -157,7 +157,7 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
(sense->asc == 0x24 || sense->asc == 0x20)) {
printk(KERN_ERR "%s: door locking not supported\n",
drive->name);
drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
stat = 0;
}
......
drivers/ide/ide-disk.c
浏览文件 @ 72558dde
......@@ -14,9 +14,6 @@
* This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
*/
#define IDEDISK_VERSION "1.18"
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
......@@ -39,46 +36,8 @@
#include <asm/io.h>
#include <asm/div64.h>
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
#define IDE_DISK_MINORS (1 << PARTN_BITS)
#else
#define IDE_DISK_MINORS 0
#endif
#include "ide-disk.h"
static DEFINE_MUTEX(idedisk_ref_mutex);
#define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref)
static void ide_disk_release(struct kref *);
static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
{
struct ide_disk_obj *idkp = NULL;
mutex_lock(&idedisk_ref_mutex);
idkp = ide_disk_g(disk);
if (idkp) {
if (ide_device_get(idkp->drive))
idkp = NULL;
else
kref_get(&idkp->kref);
}
mutex_unlock(&idedisk_ref_mutex);
return idkp;
}
static void ide_disk_put(struct ide_disk_obj *idkp)
{
ide_drive_t *drive = idkp->drive;
mutex_lock(&idedisk_ref_mutex);
kref_put(&idkp->kref, ide_disk_release);
ide_device_put(drive);
mutex_unlock(&idedisk_ref_mutex);
}
static const u8 ide_rw_cmds[] = {
ATA_CMD_READ_MULTI,
ATA_CMD_WRITE_MULTI,
......@@ -374,7 +333,7 @@ static void idedisk_check_hpa(ide_drive_t *drive)
}
}
static void init_idedisk_capacity(ide_drive_t *drive)
static int ide_disk_get_capacity(ide_drive_t *drive)
{
u16 *id = drive->id;
int lba;
......@@ -403,11 +362,28 @@ static void init_idedisk_capacity(ide_drive_t *drive)
if (ata_id_hpa_enabled(id))
idedisk_check_hpa(drive);
}
}
sector_t ide_disk_capacity(ide_drive_t *drive)
{
return drive->capacity64;
/* limit drive capacity to 137GB if LBA48 cannot be used */
if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
drive->capacity64 > 1ULL << 28) {
printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
"%llu sectors (%llu MB)\n",
drive->name, (unsigned long long)drive->capacity64,
sectors_to_MB(drive->capacity64));
drive->capacity64 = 1ULL << 28;
}
if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
(drive->dev_flags & IDE_DFLAG_LBA48)) {
if (drive->capacity64 > 1ULL << 28) {
printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
" will be used for accessing sectors "
"> %u\n", drive->name, 1 << 28);
} else
drive->dev_flags &= ~IDE_DFLAG_LBA48;
}
return 0;
}
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
......@@ -508,7 +484,7 @@ static void update_ordered(ide_drive_t *drive)
* time we have trimmed the drive capacity if LBA48 is
* not available so we don't need to recheck that.
*/
capacity = ide_disk_capacity(drive);
capacity = ide_gd_capacity(drive);
barrier = ata_id_flush_enabled(id) &&
(drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
......@@ -616,7 +592,12 @@ ide_ext_devset_rw(wcache, wcache);
ide_ext_devset_rw_sync(nowerr, nowerr);
static void idedisk_setup(ide_drive_t *drive)
static int ide_disk_check(ide_drive_t *drive, const char *s)
{
return 1;
}
static void ide_disk_setup(ide_drive_t *drive)
{
struct ide_disk_obj *idkp = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
......@@ -652,33 +633,13 @@ static void idedisk_setup(ide_drive_t *drive)
drive->queue->max_sectors / 2);
/* calculate drive capacity, and select LBA if possible */
init_idedisk_capacity(drive);
/* limit drive capacity to 137GB if LBA48 cannot be used */
if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
drive->capacity64 > 1ULL << 28) {
printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
"%llu sectors (%llu MB)\n",
drive->name, (unsigned long long)drive->capacity64,
sectors_to_MB(drive->capacity64));
drive->capacity64 = 1ULL << 28;
}
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
(drive->dev_flags & IDE_DFLAG_LBA48)) {
if (drive->capacity64 > 1ULL << 28) {
printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
" will be used for accessing sectors "
"> %u\n", drive->name, 1 << 28);
} else
drive->dev_flags &= ~IDE_DFLAG_LBA48;
}
ide_disk_get_capacity(drive);
/*
* if possible, give fdisk access to more of the drive,
* by correcting bios_cyls:
*/
capacity = ide_disk_capacity(drive);
capacity = ide_gd_capacity(drive);
if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
if (ata_id_lba48_enabled(drive->id)) {
......@@ -718,9 +679,17 @@ static void idedisk_setup(ide_drive_t *drive)
drive->dev_flags |= IDE_DFLAG_WCACHE;
set_wcache(drive, 1);
if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
(drive->head == 0 || drive->head > 16)) {
printk(KERN_ERR "%s: invalid geometry: %d physical heads?\n",
drive->name, drive->head);
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
} else
drive->dev_flags |= IDE_DFLAG_ATTACH;
}
static void ide_cacheflush_p(ide_drive_t *drive)
static void ide_disk_flush(ide_drive_t *drive)
{
if (ata_id_flush_enabled(drive->id) == 0 ||
(drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
......@@ -730,267 +699,40 @@ static void ide_cacheflush_p(ide_drive_t *drive)
printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
}
static void ide_disk_remove(ide_drive_t *drive)
{
struct ide_disk_obj *idkp = drive->driver_data;
struct gendisk *g = idkp->disk;
ide_proc_unregister_driver(drive, idkp->driver);
del_gendisk(g);
ide_cacheflush_p(drive);
ide_disk_put(idkp);
}
static void ide_disk_release(struct kref *kref)
{
struct ide_disk_obj *idkp = to_ide_disk(kref);
ide_drive_t *drive = idkp->drive;
struct gendisk *g = idkp->disk;
drive->driver_data = NULL;
g->private_data = NULL;
put_disk(g);
kfree(idkp);
}
static int ide_disk_probe(ide_drive_t *drive);
/*
* On HPA drives the capacity needs to be
* reinitilized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_disk_resume(ide_drive_t *drive)
static int ide_disk_init_media(ide_drive_t *drive, struct gendisk *disk)
{
if (ata_id_hpa_enabled(drive->id))
init_idedisk_capacity(drive);
}
static void ide_device_shutdown(ide_drive_t *drive)
{
#ifdef CONFIG_ALPHA
/* On Alpha, halt(8) doesn't actually turn the machine off,
it puts you into the sort of firmware monitor. Typically,
it's used to boot another kernel image, so it's not much
different from reboot(8). Therefore, we don't need to
spin down the disk in this case, especially since Alpha
firmware doesn't handle disks in standby mode properly.
On the other hand, it's reasonably safe to turn the power
off when the shutdown process reaches the firmware prompt,
as the firmware initialization takes rather long time -
at least 10 seconds, which should be sufficient for
the disk to expire its write cache. */
if (system_state != SYSTEM_POWER_OFF) {
#else
if (system_state == SYSTEM_RESTART) {
#endif
ide_cacheflush_p(drive);
return;
}
printk(KERN_INFO "Shutdown: %s\n", drive->name);
drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
return 0;
}
static ide_driver_t idedisk_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-disk",
.bus = &ide_bus_type,
},
.probe = ide_disk_probe,
.remove = ide_disk_remove,
.resume = ide_disk_resume,
.shutdown = ide_device_shutdown,
.version = IDEDISK_VERSION,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = ide_disk_proc,
.settings = ide_disk_settings,
#endif
};
static int idedisk_set_doorlock(ide_drive_t *drive, int on)
static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk,
int on)
{
ide_task_t task;
int ret;
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
return 0;
memset(&task, 0, sizeof(task));
task.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
return ide_no_data_taskfile(drive, &task);
}
static int idedisk_open(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_disk_obj *idkp;
ide_drive_t *drive;
idkp = ide_disk_get(disk);
if (idkp == NULL)
return -ENXIO;
drive = idkp->drive;
idkp->openers++;
if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
check_disk_change(inode->i_bdev);
/*
* Ignore the return code from door_lock,
* since the open() has already succeeded,
* and the door_lock is irrelevant at this point.
*/
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
idedisk_set_doorlock(drive, 1))
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
return 0;
}
static int idedisk_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_disk_obj *idkp = ide_disk_g(disk);
ide_drive_t *drive = idkp->drive;
if (idkp->openers == 1)
ide_cacheflush_p(drive);
if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
idedisk_set_doorlock(drive, 0))
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
ret = ide_no_data_taskfile(drive, &task);
idkp->openers--;
if (ret)
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
ide_disk_put(idkp);
return 0;
}
static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
ide_drive_t *drive = idkp->drive;
geo->heads = drive->bios_head;
geo->sectors = drive->bios_sect;
geo->cylinders = (u16)drive->bios_cyl; /* truncate */
return 0;
return ret;
}
static int idedisk_media_changed(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
ide_drive_t *drive = idkp->drive;
/* do not scan partitions twice if this is a removable device */
if (drive->dev_flags & IDE_DFLAG_ATTACH) {
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
/* if removable, always assume it was changed */
return !!(drive->dev_flags & IDE_DFLAG_REMOVABLE);
}
static int idedisk_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
set_capacity(disk, ide_disk_capacity(idkp->drive));
return 0;
}
static struct block_device_operations idedisk_ops = {
.owner = THIS_MODULE,
.open = idedisk_open,
.release = idedisk_release,
.ioctl = ide_disk_ioctl,
.getgeo = idedisk_getgeo,
.media_changed = idedisk_media_changed,
.revalidate_disk = idedisk_revalidate_disk
const struct ide_disk_ops ide_ata_disk_ops = {
.check = ide_disk_check,
.get_capacity = ide_disk_get_capacity,
.setup = ide_disk_setup,
.flush = ide_disk_flush,
.init_media = ide_disk_init_media,
.set_doorlock = ide_disk_set_doorlock,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.ioctl = ide_disk_ioctl,
};
MODULE_DESCRIPTION("ATA DISK Driver");
static int ide_disk_probe(ide_drive_t *drive)
{
struct ide_disk_obj *idkp;
struct gendisk *g;
/* strstr("foo", "") is non-NULL */
if (!strstr("ide-disk", drive->driver_req))
goto failed;
if (drive->media != ide_disk)
goto failed;
idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
if (!idkp)
goto failed;
g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif));
if (!g)
goto out_free_idkp;
ide_init_disk(g, drive);
kref_init(&idkp->kref);
idkp->drive = drive;
idkp->driver = &idedisk_driver;
idkp->disk = g;
g->private_data = &idkp->driver;
drive->driver_data = idkp;
idedisk_setup(drive);
if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
(drive->head == 0 || drive->head > 16)) {
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
drive->name, drive->head);
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
} else
drive->dev_flags |= IDE_DFLAG_ATTACH;
g->minors = IDE_DISK_MINORS;
g->driverfs_dev = &drive->gendev;
g->flags |= GENHD_FL_EXT_DEVT;
if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
g->flags = GENHD_FL_REMOVABLE;
set_capacity(g, ide_disk_capacity(drive));
g->fops = &idedisk_ops;
add_disk(g);
return 0;
out_free_idkp:
kfree(idkp);
failed:
return -ENODEV;
}
static void __exit idedisk_exit(void)
{
driver_unregister(&idedisk_driver.gen_driver);
}
static int __init idedisk_init(void)
{
return driver_register(&idedisk_driver.gen_driver);
}
MODULE_ALIAS("ide:*m-disk*");
MODULE_ALIAS("ide-disk");
module_init(idedisk_init);
module_exit(idedisk_exit);
MODULE_LICENSE("GPL");
drivers/ide/ide-disk.h
浏览文件 @ 72558dde
#ifndef __IDE_DISK_H
#define __IDE_DISK_H
struct ide_disk_obj {
ide_drive_t *drive;
ide_driver_t *driver;
struct gendisk *disk;
struct kref kref;
unsigned int openers; /* protected by BKL for now */
};
#define ide_disk_g(disk) \
container_of((disk)->private_data, struct ide_disk_obj, driver)
#include "ide-gd.h"
#ifdef CONFIG_IDE_GD_ATA
/* ide-disk.c */
sector_t ide_disk_capacity(ide_drive_t *);
extern const struct ide_disk_ops ide_ata_disk_ops;
ide_decl_devset(address);
ide_decl_devset(multcount);
ide_decl_devset(nowerr);
......@@ -21,12 +13,17 @@ ide_decl_devset(wcache);
ide_decl_devset(acoustic);
/* ide-disk_ioctl.c */
int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
int ide_disk_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
unsigned long);
#ifdef CONFIG_IDE_PROC_FS
/* ide-disk_proc.c */
extern ide_proc_entry_t ide_disk_proc[];
extern const struct ide_proc_devset ide_disk_settings[];
#endif
#else
#define ide_disk_proc NULL
#define ide_disk_settings NULL
#endif
#endif /* __IDE_DISK_H */
drivers/ide/ide-disk_ioctl.c
浏览文件 @ 72558dde
......@@ -13,12 +13,10 @@ static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
{ 0 }
};
int ide_disk_ioctl(struct inode *inode, struct file *file,
int ide_disk_ioctl(ide_drive_t *drive, struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
ide_drive_t *drive = idkp->drive;
int err;
err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
......
drivers/ide/ide-disk_proc.c
浏览文件 @ 72558dde
......@@ -56,7 +56,7 @@ static int proc_idedisk_read_capacity
ide_drive_t*drive = (ide_drive_t *)data;
int len;
len = sprintf(page, "%llu\n", (long long)ide_disk_capacity(drive));
len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive));
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}
......
drivers/ide/ide-dma-sff.c
浏览文件 @ 72558dde
......@@ -130,7 +130,7 @@ int ide_build_dmatable(ide_drive_t *drive, struct request *rq)
xcount = bcount & 0xffff;
if (is_trm290)
xcount = ((xcount >> 2) - 1) << 16;
if (xcount == 0x0000) {
else if (xcount == 0x0000) {
if (count++ >= PRD_ENTRIES)
goto use_pio_instead;
*table++ = cpu_to_le32(0x8000);
......
drivers/ide/ide-floppy.c
浏览文件 @ 72558dde
......@@ -15,12 +15,6 @@
* Documentation/ide/ChangeLog.ide-floppy.1996-2002
*/
#define DRV_NAME "ide-floppy"
#define PFX DRV_NAME ": "
#define IDEFLOPPY_VERSION "1.00"
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
......@@ -49,19 +43,6 @@
#include "ide-floppy.h"
/* module parameters */
static unsigned long debug_mask;
module_param(debug_mask, ulong, 0644);
/* define to see debug info */
#define IDEFLOPPY_DEBUG_LOG 0
#if IDEFLOPPY_DEBUG_LOG
#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
#else
#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
/*
* After each failed packet command we issue a request sense command and retry
* the packet command IDEFLOPPY_MAX_PC_RETRIES times.
......@@ -83,43 +64,13 @@ module_param(debug_mask, ulong, 0644);
/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101
static DEFINE_MUTEX(idefloppy_ref_mutex);
static void idefloppy_cleanup_obj(struct kref *);
static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
{
struct ide_floppy_obj *floppy = NULL;
mutex_lock(&idefloppy_ref_mutex);
floppy = ide_drv_g(disk, ide_floppy_obj);
if (floppy) {
if (ide_device_get(floppy->drive))
floppy = NULL;
else
kref_get(&floppy->kref);
}
mutex_unlock(&idefloppy_ref_mutex);
return floppy;
}
static void ide_floppy_put(struct ide_floppy_obj *floppy)
{
ide_drive_t *drive = floppy->drive;
mutex_lock(&idefloppy_ref_mutex);
kref_put(&floppy->kref, idefloppy_cleanup_obj);
ide_device_put(drive);
mutex_unlock(&idefloppy_ref_mutex);
}
/*
* Used to finish servicing a request. For read/write requests, we will call
* ide_end_request to pass to the next buffer.
*/
static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
static int ide_floppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
int error;
......@@ -161,12 +112,12 @@ static void idefloppy_update_buffers(ide_drive_t *drive,
struct bio *bio = rq->bio;
while ((bio = rq->bio) != NULL)
idefloppy_end_request(drive, 1, 0);
ide_floppy_end_request(drive, 1, 0);
}
static void ide_floppy_callback(ide_drive_t *drive, int dsc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_atapi_pc *pc = drive->pc;
int uptodate = pc->error ? 0 : 1;
......@@ -200,10 +151,10 @@ static void ide_floppy_callback(ide_drive_t *drive, int dsc)
"Aborting request!\n");
}
idefloppy_end_request(drive, uptodate, 0);
ide_floppy_end_request(drive, uptodate, 0);
}
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
static void ide_floppy_report_error(struct ide_disk_obj *floppy,
struct ide_atapi_pc *pc)
{
/* supress error messages resulting from Medium not present */
......@@ -222,7 +173,7 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
if (floppy->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
......@@ -286,7 +237,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
int blocks = rq->nr_sectors / floppy->bs_factor;
int cmd = rq_data_dir(rq);
......@@ -310,7 +261,7 @@ static void idefloppy_create_rw_cmd(ide_drive_t *drive,
pc->flags |= PC_FLAG_DMA_OK;
}
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
struct ide_atapi_pc *pc, struct request *rq)
{
ide_init_pc(pc);
......@@ -329,13 +280,12 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
pc->req_xfer = pc->buf_size = rq->data_len;
}
static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
struct request *rq, sector_t block_s)
static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
struct request *rq, sector_t block)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;
ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, "
"errors: %d\n",
......@@ -353,7 +303,7 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
else
printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
idefloppy_end_request(drive, 0, 0);
ide_floppy_end_request(drive, 0, 0);
return ide_stopped;
}
if (blk_fs_request(rq)) {
......@@ -361,11 +311,11 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
(rq->nr_sectors % floppy->bs_factor)) {
printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
drive->name);
idefloppy_end_request(drive, 0, 0);
ide_floppy_end_request(drive, 0, 0);
return ide_stopped;
}
pc = &floppy->queued_pc;
idefloppy_create_rw_cmd(drive, pc, rq, block);
idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
} else if (blk_special_request(rq)) {
pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
......@@ -373,7 +323,7 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
idefloppy_blockpc_cmd(floppy, pc, rq);
} else {
blk_dump_rq_flags(rq, PFX "unsupported command in queue");
idefloppy_end_request(drive, 0, 0);
ide_floppy_end_request(drive, 0, 0);
return ide_stopped;
}
......@@ -394,7 +344,7 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
*/
static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *page;
......@@ -410,11 +360,11 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
}
if (pc.buf[3] & 0x80)
drive->atapi_flags |= IDE_AFLAG_WP;
drive->dev_flags |= IDE_DFLAG_WP;
else
drive->atapi_flags &= ~IDE_AFLAG_WP;
drive->dev_flags &= ~IDE_DFLAG_WP;
set_disk_ro(disk, !!(drive->atapi_flags & IDE_AFLAG_WP));
set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
page = &pc.buf[8];
......@@ -445,7 +395,9 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
drive->name, lba_capacity, capacity);
floppy->blocks = floppy->block_size ?
capacity / floppy->block_size : 0;
drive->capacity64 = floppy->blocks * floppy->bs_factor;
}
return 0;
}
......@@ -455,7 +407,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
*/
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
struct ide_atapi_pc pc;
u8 *cap_desc;
......@@ -466,7 +418,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
drive->bios_head = drive->bios_sect = 0;
floppy->blocks = 0;
floppy->bs_factor = 1;
set_capacity(floppy->disk, 0);
drive->capacity64 = 0;
ide_floppy_create_read_capacity_cmd(&pc);
if (ide_queue_pc_tail(drive, disk, &pc)) {
......@@ -523,6 +475,8 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
"non 512 bytes block size not "
"fully supported\n",
drive->name);
drive->capacity64 =
floppy->blocks * floppy->bs_factor;
rc = 0;
}
break;
......@@ -547,21 +501,12 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
(void) ide_floppy_get_flexible_disk_page(drive);
set_capacity(disk, floppy->blocks * floppy->bs_factor);
return rc;
}
sector_t ide_floppy_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
unsigned long capacity = floppy->blocks * floppy->bs_factor;
return capacity;
}
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
static void ide_floppy_setup(ide_drive_t *drive)
{
struct ide_disk_obj *floppy = drive->driver_data;
u16 *id = drive->id;
drive->pc_callback = ide_floppy_callback;
......@@ -592,252 +537,42 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
blk_queue_max_sectors(drive->queue, 64);
drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
/* IOMEGA Clik! drives do not support lock/unlock commands */
drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
(void) ide_floppy_get_capacity(drive);
ide_proc_register_driver(drive, floppy->driver);
}
static void ide_floppy_remove(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct gendisk *g = floppy->disk;
ide_proc_unregister_driver(drive, floppy->driver);
del_gendisk(g);
ide_floppy_put(floppy);
drive->dev_flags |= IDE_DFLAG_ATTACH;
}
static void idefloppy_cleanup_obj(struct kref *kref)
static void ide_floppy_flush(ide_drive_t *drive)
{
struct ide_floppy_obj *floppy = to_ide_drv(kref, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
struct gendisk *g = floppy->disk;
drive->driver_data = NULL;
g->private_data = NULL;
put_disk(g);
kfree(floppy);
}
static int ide_floppy_probe(ide_drive_t *);
static ide_driver_t idefloppy_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-floppy",
.bus = &ide_bus_type,
},
.probe = ide_floppy_probe,
.remove = ide_floppy_remove,
.version = IDEFLOPPY_VERSION,
.do_request = idefloppy_do_request,
.end_request = idefloppy_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = ide_floppy_proc,
.settings = ide_floppy_settings,
#endif
};
static int idefloppy_open(struct inode *inode, struct file *filp)
static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy;
ide_drive_t *drive;
int ret = 0;
floppy = ide_floppy_get(disk);
if (!floppy)
return -ENXIO;
drive = floppy->drive;
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
floppy->openers++;
if (floppy->openers == 1) {
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
/* Just in case */
if (ide_do_test_unit_ready(drive, disk))
ide_do_start_stop(drive, disk, 1);
if (ide_floppy_get_capacity(drive)
&& (filp->f_flags & O_NDELAY) == 0
/*
* Allow O_NDELAY to open a drive without a disk, or with an
* unreadable disk, so that we can get the format capacity
* of the drive or begin the format - Sam
*/
) {
ret = -EIO;
goto out_put_floppy;
}
if ((drive->atapi_flags & IDE_AFLAG_WP) && (filp->f_mode & 2)) {
ret = -EROFS;
goto out_put_floppy;
}
drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
ide_set_media_lock(drive, disk, 1);
check_disk_change(inode->i_bdev);
} else if (drive->atapi_flags & IDE_AFLAG_FORMAT_IN_PROGRESS) {
ret = -EBUSY;
goto out_put_floppy;
}
return 0;
out_put_floppy:
floppy->openers--;
ide_floppy_put(floppy);
return ret;
}
static int idefloppy_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
if (floppy->openers == 1) {
ide_set_media_lock(drive, disk, 0);
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
}
floppy->openers--;
ide_floppy_put(floppy);
return 0;
}
static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
if (ide_do_test_unit_ready(drive, disk))
ide_do_start_stop(drive, disk, 1);
geo->heads = drive->bios_head;
geo->sectors = drive->bios_sect;
geo->cylinders = (u16)drive->bios_cyl; /* truncate */
return 0;
}
ret = ide_floppy_get_capacity(drive);
static int idefloppy_media_changed(struct gendisk *disk)
{
struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
int ret;
set_capacity(disk, ide_gd_capacity(drive));
/* do not scan partitions twice if this is a removable device */
if (drive->dev_flags & IDE_DFLAG_ATTACH) {
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED);
drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED;
return ret;
}
static int idefloppy_revalidate_disk(struct gendisk *disk)
{
struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
set_capacity(disk, ide_floppy_capacity(floppy->drive));
return 0;
}
static struct block_device_operations idefloppy_ops = {
.owner = THIS_MODULE,
.open = idefloppy_open,
.release = idefloppy_release,
.ioctl = ide_floppy_ioctl,
.getgeo = idefloppy_getgeo,
.media_changed = idefloppy_media_changed,
.revalidate_disk = idefloppy_revalidate_disk
const struct ide_disk_ops ide_atapi_disk_ops = {
.check = ide_check_atapi_device,
.get_capacity = ide_floppy_get_capacity,
.setup = ide_floppy_setup,
.flush = ide_floppy_flush,
.init_media = ide_floppy_init_media,
.set_doorlock = ide_set_media_lock,
.do_request = ide_floppy_do_request,
.end_request = ide_floppy_end_request,
.ioctl = ide_floppy_ioctl,
};
static int ide_floppy_probe(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy;
struct gendisk *g;
if (!strstr("ide-floppy", drive->driver_req))
goto failed;
if (drive->media != ide_floppy)
goto failed;
if (!ide_check_atapi_device(drive, DRV_NAME)) {
printk(KERN_ERR PFX "%s: not supported by this version of "
DRV_NAME "\n", drive->name);
goto failed;
}
floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
if (!floppy) {
printk(KERN_ERR PFX "%s: Can't allocate a floppy structure\n",
drive->name);
goto failed;
}
g = alloc_disk(1 << PARTN_BITS);
if (!g)
goto out_free_floppy;
ide_init_disk(g, drive);
kref_init(&floppy->kref);
floppy->drive = drive;
floppy->driver = &idefloppy_driver;
floppy->disk = g;
g->private_data = &floppy->driver;
drive->driver_data = floppy;
drive->debug_mask = debug_mask;
idefloppy_setup(drive, floppy);
drive->dev_flags |= IDE_DFLAG_ATTACH;
g->minors = 1 << PARTN_BITS;
g->driverfs_dev = &drive->gendev;
if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
g->flags = GENHD_FL_REMOVABLE;
g->fops = &idefloppy_ops;
add_disk(g);
return 0;
out_free_floppy:
kfree(floppy);
failed:
return -ENODEV;
}
static void __exit idefloppy_exit(void)
{
driver_unregister(&idefloppy_driver.gen_driver);
}
static int __init idefloppy_init(void)
{
printk(KERN_INFO DRV_NAME " driver " IDEFLOPPY_VERSION "\n");
return driver_register(&idefloppy_driver.gen_driver);
}
MODULE_ALIAS("ide:*m-floppy*");
MODULE_ALIAS("ide-floppy");
module_init(idefloppy_init);
module_exit(idefloppy_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ATAPI FLOPPY Driver");
drivers/ide/ide-floppy.h
浏览文件 @ 72558dde
#ifndef __IDE_FLOPPY_H
#define __IDE_FLOPPY_H
/*
* Most of our global data which we need to save even as we leave the driver
* due to an interrupt or a timer event is stored in a variable of type
* idefloppy_floppy_t, defined below.
*/
typedef struct ide_floppy_obj {
ide_drive_t *drive;
ide_driver_t *driver;
struct gendisk *disk;
struct kref kref;
unsigned int openers; /* protected by BKL for now */
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used for blk_{fs,pc}_request() requests */
struct ide_atapi_pc queued_pc;
/* Last error information */
u8 sense_key, asc, ascq;
int progress_indication;
/* Device information */
/* Current format */
int blocks, block_size, bs_factor;
/* Last format capacity descriptor */
u8 cap_desc[8];
/* Copy of the flexible disk page */
u8 flexible_disk_page[32];
} idefloppy_floppy_t;
#include "ide-gd.h"
#ifdef CONFIG_IDE_GD_ATAPI
/*
* Pages of the SELECT SENSE / MODE SENSE packet commands.
* See SFF-8070i spec.
......@@ -46,17 +18,22 @@ typedef struct ide_floppy_obj {
#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
/* ide-floppy.c */
extern const struct ide_disk_ops ide_atapi_disk_ops;
void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
sector_t ide_floppy_capacity(ide_drive_t *);
/* ide-floppy_ioctl.c */
int ide_floppy_ioctl(struct inode *, struct file *, unsigned, unsigned long);
int ide_floppy_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
unsigned long);
#ifdef CONFIG_IDE_PROC_FS
/* ide-floppy_proc.c */
extern ide_proc_entry_t ide_floppy_proc[];
extern const struct ide_proc_devset ide_floppy_settings[];
#endif
#else
#define ide_floppy_proc NULL
#define ide_floppy_settings NULL
#endif
#endif /*__IDE_FLOPPY_H */
drivers/ide/ide-floppy_ioctl.c
浏览文件 @ 72558dde
......@@ -33,7 +33,7 @@
static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_atapi_pc pc;
u8 header_len, desc_cnt;
int i, blocks, length, u_array_size, u_index;
......@@ -113,7 +113,7 @@ static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_atapi_pc pc;
drive->atapi_flags &= ~IDE_AFLAG_SRFP;
......@@ -132,17 +132,17 @@ static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_atapi_pc pc;
int blocks, length, flags, err = 0;
if (floppy->openers > 1) {
/* Don't format if someone is using the disk */
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
return -EBUSY;
}
drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
drive->dev_flags |= IDE_DFLAG_FORMAT_IN_PROGRESS;
/*
* Send ATAPI_FORMAT_UNIT to the drive.
......@@ -174,7 +174,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
out:
if (err)
drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
return err;
}
......@@ -190,7 +190,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct ide_atapi_pc pc;
int progress_indication = 0x10000;
......@@ -226,7 +226,7 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned long arg, unsigned int cmd)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct ide_disk_obj *floppy = drive->driver_data;
struct gendisk *disk = floppy->disk;
int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
......@@ -260,13 +260,10 @@ static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
}
}
int ide_floppy_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
int ide_floppy_ioctl(ide_drive_t *drive, struct inode *inode,
struct file *file, unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
struct ide_atapi_pc pc;
void __user *argp = (void __user *)arg;
int err;
......
drivers/ide/ide-floppy_proc.c
浏览文件 @ 72558dde
......@@ -9,7 +9,7 @@ static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
ide_drive_t*drive = (ide_drive_t *)data;
int len;
len = sprintf(page, "%llu\n", (long long)ide_floppy_capacity(drive));
len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive));
PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}
......
drivers/ide/ide-gd.c 0 → 100644
浏览文件 @ 72558dde
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/mutex.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
#define IDE_DISK_MINORS (1 << PARTN_BITS)
#else
#define IDE_DISK_MINORS 0
#endif
#include "ide-disk.h"
#include "ide-floppy.h"
#define IDE_GD_VERSION "1.18"
/* module parameters */
static unsigned long debug_mask;
module_param(debug_mask, ulong, 0644);
static DEFINE_MUTEX(ide_disk_ref_mutex);
static void ide_disk_release(struct kref *);
static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
{
struct ide_disk_obj *idkp = NULL;
mutex_lock(&ide_disk_ref_mutex);
idkp = ide_drv_g(disk, ide_disk_obj);
if (idkp) {
if (ide_device_get(idkp->drive))
idkp = NULL;
else
kref_get(&idkp->kref);
}
mutex_unlock(&ide_disk_ref_mutex);
return idkp;
}
static void ide_disk_put(struct ide_disk_obj *idkp)
{
ide_drive_t *drive = idkp->drive;
mutex_lock(&ide_disk_ref_mutex);
kref_put(&idkp->kref, ide_disk_release);
ide_device_put(drive);
mutex_unlock(&ide_disk_ref_mutex);
}
sector_t ide_gd_capacity(ide_drive_t *drive)
{
return drive->capacity64;
}
static int ide_gd_probe(ide_drive_t *);
static void ide_gd_remove(ide_drive_t *drive)
{
struct ide_disk_obj *idkp = drive->driver_data;
struct gendisk *g = idkp->disk;
ide_proc_unregister_driver(drive, idkp->driver);
del_gendisk(g);
drive->disk_ops->flush(drive);
ide_disk_put(idkp);
}
static void ide_disk_release(struct kref *kref)
{
struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
struct gendisk *g = idkp->disk;
drive->disk_ops = NULL;
drive->driver_data = NULL;
g->private_data = NULL;
put_disk(g);
kfree(idkp);
}
/*
* On HPA drives the capacity needs to be
* reinitilized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_gd_resume(ide_drive_t *drive)
{
if (ata_id_hpa_enabled(drive->id))
(void)drive->disk_ops->get_capacity(drive);
}
static void ide_gd_shutdown(ide_drive_t *drive)
{
#ifdef CONFIG_ALPHA
/* On Alpha, halt(8) doesn't actually turn the machine off,
it puts you into the sort of firmware monitor. Typically,
it's used to boot another kernel image, so it's not much
different from reboot(8). Therefore, we don't need to
spin down the disk in this case, especially since Alpha
firmware doesn't handle disks in standby mode properly.
On the other hand, it's reasonably safe to turn the power
off when the shutdown process reaches the firmware prompt,
as the firmware initialization takes rather long time -
at least 10 seconds, which should be sufficient for
the disk to expire its write cache. */
if (system_state != SYSTEM_POWER_OFF) {
#else
if (system_state == SYSTEM_RESTART) {
#endif
drive->disk_ops->flush(drive);
return;
}
printk(KERN_INFO "Shutdown: %s\n", drive->name);
drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
}
#ifdef CONFIG_IDE_PROC_FS
static ide_proc_entry_t *ide_disk_proc_entries(ide_drive_t *drive)
{
return (drive->media == ide_disk) ? ide_disk_proc : ide_floppy_proc;
}
static const struct ide_proc_devset *ide_disk_proc_devsets(ide_drive_t *drive)
{
return (drive->media == ide_disk) ? ide_disk_settings
: ide_floppy_settings;
}
#endif
static ide_startstop_t ide_gd_do_request(ide_drive_t *drive,
struct request *rq, sector_t sector)
{
return drive->disk_ops->do_request(drive, rq, sector);
}
static int ide_gd_end_request(ide_drive_t *drive, int uptodate, int nrsecs)
{
return drive->disk_ops->end_request(drive, uptodate, nrsecs);
}
static ide_driver_t ide_gd_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-gd",
.bus = &ide_bus_type,
},
.probe = ide_gd_probe,
.remove = ide_gd_remove,
.resume = ide_gd_resume,
.shutdown = ide_gd_shutdown,
.version = IDE_GD_VERSION,
.do_request = ide_gd_do_request,
.end_request = ide_gd_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc_entries = ide_disk_proc_entries,
.proc_devsets = ide_disk_proc_devsets,
#endif
};
static int ide_gd_open(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_disk_obj *idkp;
ide_drive_t *drive;
int ret = 0;
idkp = ide_disk_get(disk);
if (idkp == NULL)
return -ENXIO;
drive = idkp->drive;
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
idkp->openers++;
if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
/* Just in case */
ret = drive->disk_ops->init_media(drive, disk);
/*
* Allow O_NDELAY to open a drive without a disk, or with an
* unreadable disk, so that we can get the format capacity
* of the drive or begin the format - Sam
*/
if (ret && (filp->f_flags & O_NDELAY) == 0) {
ret = -EIO;
goto out_put_idkp;
}
if ((drive->dev_flags & IDE_DFLAG_WP) && (filp->f_mode & 2)) {
ret = -EROFS;
goto out_put_idkp;
}
/*
* Ignore the return code from door_lock,
* since the open() has already succeeded,
* and the door_lock is irrelevant at this point.
*/
drive->disk_ops->set_doorlock(drive, disk, 1);
drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
check_disk_change(inode->i_bdev);
} else if (drive->dev_flags & IDE_DFLAG_FORMAT_IN_PROGRESS) {
ret = -EBUSY;
goto out_put_idkp;
}
return 0;
out_put_idkp:
idkp->openers--;
ide_disk_put(idkp);
return ret;
}
static int ide_gd_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
if (idkp->openers == 1)
drive->disk_ops->flush(drive);
if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
drive->disk_ops->set_doorlock(drive, disk, 0);
drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
}
idkp->openers--;
ide_disk_put(idkp);
return 0;
}
static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
geo->heads = drive->bios_head;
geo->sectors = drive->bios_sect;
geo->cylinders = (u16)drive->bios_cyl; /* truncate */
return 0;
}
static int ide_gd_media_changed(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
int ret;
/* do not scan partitions twice if this is a removable device */
if (drive->dev_flags & IDE_DFLAG_ATTACH) {
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
ret = !!(drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED);
drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED;
return ret;
}
static int ide_gd_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
set_capacity(disk, ide_gd_capacity(idkp->drive));
return 0;
}
static int ide_gd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
ide_drive_t *drive = idkp->drive;
return drive->disk_ops->ioctl(drive, inode, file, cmd, arg);
}
static struct block_device_operations ide_gd_ops = {
.owner = THIS_MODULE,
.open = ide_gd_open,
.release = ide_gd_release,
.ioctl = ide_gd_ioctl,
.getgeo = ide_gd_getgeo,
.media_changed = ide_gd_media_changed,
.revalidate_disk = ide_gd_revalidate_disk
};
static int ide_gd_probe(ide_drive_t *drive)
{
const struct ide_disk_ops *disk_ops = NULL;
struct ide_disk_obj *idkp;
struct gendisk *g;
/* strstr("foo", "") is non-NULL */
if (!strstr("ide-gd", drive->driver_req))
goto failed;
#ifdef CONFIG_IDE_GD_ATA
if (drive->media == ide_disk)
disk_ops = &ide_ata_disk_ops;
#endif
#ifdef CONFIG_IDE_GD_ATAPI
if (drive->media == ide_floppy)
disk_ops = &ide_atapi_disk_ops;
#endif
if (disk_ops == NULL)
goto failed;
if (disk_ops->check(drive, DRV_NAME) == 0) {
printk(KERN_ERR PFX "%s: not supported by this driver\n",
drive->name);
goto failed;
}
idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
if (!idkp) {
printk(KERN_ERR PFX "%s: can't allocate a disk structure\n",
drive->name);
goto failed;
}
g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif));
if (!g)
goto out_free_idkp;
ide_init_disk(g, drive);
kref_init(&idkp->kref);
idkp->drive = drive;
idkp->driver = &ide_gd_driver;
idkp->disk = g;
g->private_data = &idkp->driver;
drive->driver_data = idkp;
drive->debug_mask = debug_mask;
drive->disk_ops = disk_ops;
disk_ops->setup(drive);
set_capacity(g, ide_gd_capacity(drive));
g->minors = IDE_DISK_MINORS;
g->driverfs_dev = &drive->gendev;
g->flags |= GENHD_FL_EXT_DEVT;
if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
g->flags = GENHD_FL_REMOVABLE;
g->fops = &ide_gd_ops;
add_disk(g);
return 0;
out_free_idkp:
kfree(idkp);
failed:
return -ENODEV;
}
static int __init ide_gd_init(void)
{
printk(KERN_INFO DRV_NAME " driver " IDE_GD_VERSION "\n");
return driver_register(&ide_gd_driver.gen_driver);
}
static void __exit ide_gd_exit(void)
{
driver_unregister(&ide_gd_driver.gen_driver);
}
MODULE_ALIAS("ide:*m-disk*");
MODULE_ALIAS("ide-disk");
MODULE_ALIAS("ide:*m-floppy*");
MODULE_ALIAS("ide-floppy");
module_init(ide_gd_init);
module_exit(ide_gd_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("generic ATA/ATAPI disk driver");
drivers/ide/ide-gd.h 0 → 100644
浏览文件 @ 72558dde
#ifndef __IDE_GD_H
#define __IDE_GD_H
#define DRV_NAME "ide-gd"
#define PFX DRV_NAME ": "
/* define to see debug info */
#define IDE_GD_DEBUG_LOG 0
#if IDE_GD_DEBUG_LOG
#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
#else
#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
struct ide_disk_obj {
ide_drive_t *drive;
ide_driver_t *driver;
struct gendisk *disk;
struct kref kref;
unsigned int openers; /* protected by BKL for now */
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used for blk_{fs,pc}_request() requests */
struct ide_atapi_pc queued_pc;
/* Last error information */
u8 sense_key, asc, ascq;
int progress_indication;
/* Device information */
/* Current format */
int blocks, block_size, bs_factor;
/* Last format capacity descriptor */
u8 cap_desc[8];
/* Copy of the flexible disk page */
u8 flexible_disk_page[32];
};
sector_t ide_gd_capacity(ide_drive_t *);
#endif /* __IDE_GD_H */
drivers/ide/ide-iops.c
浏览文件 @ 72558dde
......@@ -755,7 +755,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
udelay(1);
SELECT_DRIVE(drive);
SELECT_MASK(drive, 0);
SELECT_MASK(drive, 1);
udelay(1);
tp_ops->set_irq(hwif, 0);
......
drivers/ide/ide-probe.c
浏览文件 @ 72558dde
......@@ -208,6 +208,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
drive->ready_stat = 0;
if (ata_id_cdb_intr(id))
drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
/* we don't do head unloading on ATAPI devices */
drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
return;
......
drivers/ide/ide-proc.c
浏览文件 @ 72558dde
......@@ -567,10 +567,10 @@ static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t
void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver)
{
mutex_lock(&ide_setting_mtx);
drive->settings = driver->settings;
drive->settings = driver->proc_devsets(drive);
mutex_unlock(&ide_setting_mtx);
ide_add_proc_entries(drive->proc, driver->proc, drive);
ide_add_proc_entries(drive->proc, driver->proc_entries(drive), drive);
}
EXPORT_SYMBOL(ide_proc_register_driver);
......@@ -591,7 +591,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
{
unsigned long flags;
ide_remove_proc_entries(drive->proc, driver->proc);
ide_remove_proc_entries(drive->proc, driver->proc_entries(drive));
mutex_lock(&ide_setting_mtx);
spin_lock_irqsave(&ide_lock, flags);
......
drivers/ide/ide-tape.c
浏览文件 @ 72558dde
......@@ -2108,7 +2108,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
/* device lacks locking support according to capabilities page */
if ((caps[6] & 1) == 0)
drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
if (caps[7] & 0x02)
tape->blk_size = 512;
......@@ -2298,6 +2298,16 @@ static ide_proc_entry_t idetape_proc[] = {
{ "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL },
{ NULL, 0, NULL, NULL }
};
static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive)
{
return idetape_proc;
}
static const struct ide_proc_devset *ide_tape_proc_devsets(ide_drive_t *drive)
{
return idetape_settings;
}
#endif
static int ide_tape_probe(ide_drive_t *);
......@@ -2315,8 +2325,8 @@ static ide_driver_t idetape_driver = {
.end_request = idetape_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idetape_proc,
.settings = idetape_settings,
.proc_entries = ide_tape_proc_entries,
.proc_devsets = ide_tape_proc_devsets,
#endif
};
......
drivers/ide/pci/Makefile
浏览文件 @ 72558dde
......@@ -11,7 +11,6 @@ obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o
obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o
obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o
obj-$(CONFIG_BLK_DEV_HPT34X) += hpt34x.o
obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o
obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o
......
drivers/ide/pci/delkin_cb.c
浏览文件 @ 72558dde
......@@ -46,10 +46,27 @@ static const struct ide_port_ops delkin_cb_port_ops = {
.quirkproc = ide_undecoded_slave,
};
static unsigned int delkin_cb_init_chipset(struct pci_dev *dev)
{
unsigned long base = pci_resource_start(dev, 0);
int i;
outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
inb(base + 0x17); /* read status to clear interrupts */
for (i = 0; i < sizeof(setup); ++i) {
if (setup[i])
outb(setup[i], base + i);
}
return 0;
}
static const struct ide_port_info delkin_cb_port_info = {
.port_ops = &delkin_cb_port_ops,
.host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
IDE_HFLAG_NO_DMA,
.init_chipset = delkin_cb_init_chipset,
};
static int __devinit
......@@ -57,7 +74,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
{
struct ide_host *host;
unsigned long base;
int i, rc;
int rc;
hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
rc = pci_enable_device(dev);
......@@ -72,12 +89,8 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
return rc;
}
base = pci_resource_start(dev, 0);
outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
inb(base + 0x17); /* read status to clear interrupts */
for (i = 0; i < sizeof(setup); ++i) {
if (setup[i])
outb(setup[i], base + i);
}
delkin_cb_init_chipset(dev);
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
......@@ -110,6 +123,40 @@ delkin_cb_remove (struct pci_dev *dev)
pci_disable_device(dev);
}
#ifdef CONFIG_PM
static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
{
pci_save_state(dev);
pci_disable_device(dev);
pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
}
static int delkin_cb_resume(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
int rc;
pci_set_power_state(dev, PCI_D0);
rc = pci_enable_device(dev);
if (rc)
return rc;
pci_restore_state(dev);
pci_set_master(dev);
if (host->init_chipset)
host->init_chipset(dev);
return 0;
}
#else
#define delkin_cb_suspend NULL
#define delkin_cb_resume NULL
#endif
static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
......@@ -122,6 +169,8 @@ static struct pci_driver delkin_cb_pci_driver = {
.id_table = delkin_cb_pci_tbl,
.probe = delkin_cb_probe,
.remove = delkin_cb_remove,
.suspend = delkin_cb_suspend,
.resume = delkin_cb_resume,
};
static int __init delkin_cb_init(void)
......
drivers/ide/pci/hpt34x.c 已删除 100644 → 0
浏览文件 @ b9138523
/*
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
*
* May be copied or modified under the terms of the GNU General Public License
*
*
* 00:12.0 Unknown mass storage controller:
* Triones Technologies, Inc.
* Unknown device 0003 (rev 01)
*
* hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010)
* hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030)
* hde: DMA 2 (0x0000 0x0002) (0x0000 0x0010)
* hdf: DMA 2 (0x0002 0x0012) (0x0010 0x0030)
* hdg: DMA 1 (0x0012 0x0052) (0x0030 0x0070)
* hdh: DMA 1 (0x0052 0x0252) (0x0070 0x00f0)
*
* ide-pci.c reference
*
* Since there are two cards that report almost identically,
* the only discernable difference is the values reported in pcicmd.
* Booting-BIOS card or HPT363 :: pcicmd == 0x07
* Non-bootable card or HPT343 :: pcicmd == 0x05
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#define DRV_NAME "hpt34x"
#define HPT343_DEBUG_DRIVE_INFO 0
static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
u8 hi_speed, lo_speed;
hi_speed = speed >> 4;
lo_speed = speed & 0x0f;
if (hi_speed & 7) {
hi_speed = (hi_speed & 4) ? 0x01 : 0x10;
} else {
lo_speed <<= 5;
lo_speed >>= 5;
}
pci_read_config_dword(dev, 0x44, &reg1);
pci_read_config_dword(dev, 0x48, &reg2);
tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
tmp2 = ((hi_speed << drive->dn) | (reg2 & ~(0x11 << drive->dn)));
pci_write_config_dword(dev, 0x44, tmp1);
pci_write_config_dword(dev, 0x48, tmp2);
#if HPT343_DEBUG_DRIVE_INFO
printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \
" (0x%02x 0x%02x)\n",
drive->name, ide_xfer_verbose(speed),
drive->dn, reg1, tmp1, reg2, tmp2,
hi_speed, lo_speed);
#endif /* HPT343_DEBUG_DRIVE_INFO */
}
static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
hpt34x_set_mode(drive, XFER_PIO_0 + pio);
}
/*
* If the BIOS does not set the IO base addaress to XX00, 343 will fail.
*/
#define HPT34X_PCI_INIT_REG 0x80
static unsigned int init_chipset_hpt34x(struct pci_dev *dev)
{
int i = 0;
unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c };
unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 };
u16 cmd;
unsigned long flags;
local_irq_save(flags);
pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (cmd & PCI_COMMAND_MEMORY)
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
else
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
/*
* Since 20-23 can be assigned and are R/W, we correct them.
*/
pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO);
for(i=0; i<4; i++) {
dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]);
dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i];
dev->resource[i].flags = IORESOURCE_IO;
pci_write_config_dword(dev,
(PCI_BASE_ADDRESS_0 + (i * 4)),
dev->resource[i].start);
}
pci_write_config_word(dev, PCI_COMMAND, cmd);
local_irq_restore(flags);
return dev->irq;
}
static const struct ide_port_ops hpt34x_port_ops = {
.set_pio_mode = hpt34x_set_pio_mode,
.set_dma_mode = hpt34x_set_mode,
};
#define IDE_HFLAGS_HPT34X \
(IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_NO_DSC | \
IDE_HFLAG_NO_AUTODMA)
static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
{ /* 0: HPT343 */
.name = DRV_NAME,
.init_chipset = init_chipset_hpt34x,
.port_ops = &hpt34x_port_ops,
.host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE,
.pio_mask = ATA_PIO5,
},
{ /* 1: HPT345 */
.name = DRV_NAME,
.init_chipset = init_chipset_hpt34x,
.port_ops = &hpt34x_port_ops,
.host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO5,
#ifdef CONFIG_HPT34X_AUTODMA
.swdma_mask = ATA_SWDMA2,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
#endif
}
};
static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
const struct ide_port_info *d;
u16 pcicmd = 0;
pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
d = &hpt34x_chipsets[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0];
return ide_pci_init_one(dev, d, NULL);
}
static const struct pci_device_id hpt34x_pci_tbl[] = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);
static struct pci_driver hpt34x_pci_driver = {
.name = "HPT34x_IDE",
.id_table = hpt34x_pci_tbl,
.probe = hpt34x_init_one,
.remove = ide_pci_remove,
.suspend = ide_pci_suspend,
.resume = ide_pci_resume,
};
static int __init hpt34x_ide_init(void)
{
return ide_pci_register_driver(&hpt34x_pci_driver);
}
static void __exit hpt34x_ide_exit(void)
{
pci_unregister_driver(&hpt34x_pci_driver);
}
module_init(hpt34x_ide_init);
module_exit(hpt34x_ide_exit);
MODULE_AUTHOR("Andre Hedrick");
MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE");
MODULE_LICENSE("GPL");
drivers/ide/pci/hpt366.c
浏览文件 @ 72558dde
......@@ -3,7 +3,7 @@
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
* Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz
* Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
* Portions Copyright (C) 2005-2008 MontaVista Software, Inc.
*
* Thanks to HighPoint Technologies for their assistance, and hardware.
* Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
......@@ -748,26 +748,24 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
if (drive->quirk_list) {
if (info->chip_type >= HPT370) {
u8 scr1 = 0;
pci_read_config_byte(dev, 0x5a, &scr1);
if (((scr1 & 0x10) >> 4) != mask) {
if (mask)
scr1 |= 0x10;
else
scr1 &= ~0x10;
pci_write_config_byte(dev, 0x5a, scr1);
}
} else {
if (drive->quirk_list == 0)
return;
if (info->chip_type >= HPT370) {
u8 scr1 = 0;
pci_read_config_byte(dev, 0x5a, &scr1);
if (((scr1 & 0x10) >> 4) != mask) {
if (mask)
disable_irq(hwif->irq);
scr1 |= 0x10;
else
enable_irq (hwif->irq);
scr1 &= ~0x10;
pci_write_config_byte(dev, 0x5a, scr1);
}
} else
outb(ATA_DEVCTL_OBS | (mask ? 2 : 0), hwif->io_ports.ctl_addr);
} else if (mask)
disable_irq(hwif->irq);
else
enable_irq(hwif->irq);
}
/*
......@@ -1289,7 +1287,6 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
......
drivers/ide/pci/scc_pata.c
浏览文件 @ 72558dde
......@@ -617,7 +617,6 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
unsigned long intmask_port;
unsigned long mode_port;
unsigned long ecmode_port;
unsigned long dma_status_port;
u32 reg = 0;
struct scc_ports *ports;
int rc;
......@@ -637,7 +636,6 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
intmask_port = dma_base + 0x010;
mode_port = ctl_base + 0x024;
ecmode_port = ctl_base + 0xf00;
dma_status_port = dma_base + 0x004;
/* controller initialization */
reg = 0;
......@@ -843,8 +841,6 @@ static u8 scc_cable_detect(ide_hwif_t *hwif)
static void __devinit init_hwif_scc(ide_hwif_t *hwif)
{
struct scc_ports *ports = ide_get_hwifdata(hwif);
/* PTERADD */
out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
......
drivers/ide/pci/sgiioc4.c
浏览文件 @ 72558dde
......@@ -101,18 +101,8 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
for (i = 0; i <= 7; i++)
hw->io_ports_array[i] = reg + i * 4;
if (ctrl_port)
hw->io_ports.ctl_addr = ctrl_port;
if (irq_port)
hw->io_ports.irq_addr = irq_port;
}
static void
sgiioc4_maskproc(ide_drive_t * drive, int mask)
{
writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0),
(void __iomem *)drive->hwif->io_ports.ctl_addr);
hw->io_ports.ctl_addr = ctrl_port;
hw->io_ports.irq_addr = irq_port;
}
static int
......@@ -310,16 +300,14 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
unsigned long port = hwif->io_ports.status_addr;
u8 reg = (u8) readb((void __iomem *) port);
if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */
unsigned long other_ir = port - 0x110;
unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */
unsigned long other_ir = port - 0x110;
unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
/* Clear the Interrupt, Error bits on the IOC4 */
if (intr_reg & 0x03) {
writel(0x03, (void __iomem *) other_ir);
intr_reg = (u32) readl((void __iomem *) other_ir);
}
/* Clear the Interrupt, Error bits on the IOC4 */
if (intr_reg & 0x03) {
writel(0x03, (void __iomem *) other_ir);
intr_reg = (u32) readl((void __iomem *) other_ir);
}
}
......@@ -332,13 +320,9 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
void __iomem *virt_dma_base;
int num_ports = sizeof (ioc4_dma_regs_t);
void *pad;
if (dma_base == 0)
return -1;
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
......@@ -348,14 +332,8 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
return -1;
}
virt_dma_base = ioremap(dma_base, num_ports);
if (virt_dma_base == NULL) {
printk(KERN_ERR "%s(%s) -- ERROR: unable to map addresses "
"0x%lx to 0x%lx\n", __func__, hwif->name,
dma_base, dma_base + num_ports - 1);
goto dma_remap_failure;
}
hwif->dma_base = (unsigned long) virt_dma_base;
hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
IOC4_DMA_OFFSET;
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
......@@ -379,9 +357,6 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
dma_pci_alloc_failure:
iounmap(virt_dma_base);
dma_remap_failure:
release_mem_region(dma_base, num_ports);
return -1;
......@@ -563,8 +538,6 @@ static const struct ide_port_ops sgiioc4_port_ops = {
.set_dma_mode = sgiioc4_set_dma_mode,
/* reset DMA engine, clear IRQs */
.resetproc = sgiioc4_resetproc,
/* mask on/off NIEN register */
.maskproc = sgiioc4_maskproc,
};
static const struct ide_dma_ops sgiioc4_dma_ops = {
......
drivers/leds/Kconfig
浏览文件 @ 72558dde
......@@ -179,7 +179,7 @@ config LEDS_TRIGGER_TIMER
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
depends on LEDS_TRIGGERS && IDE_GD_ATA
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
......
drivers/scsi/ide-scsi.c
浏览文件 @ 72558dde
......@@ -343,6 +343,11 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r
}
#ifdef CONFIG_IDE_PROC_FS
static ide_proc_entry_t idescsi_proc[] = {
{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
{ NULL, 0, NULL, NULL }
};
#define ide_scsi_devset_get(name, field) \
static int get_##name(ide_drive_t *drive) \
{ \
......@@ -378,6 +383,16 @@ static const struct ide_proc_devset idescsi_settings[] = {
IDE_PROC_DEVSET(transform, 0, 3),
{ 0 },
};
static ide_proc_entry_t *ide_scsi_proc_entries(ide_drive_t *drive)
{
return idescsi_proc;
}
static const struct ide_proc_devset *ide_scsi_proc_devsets(ide_drive_t *drive)
{
return idescsi_settings;
}
#endif
/*
......@@ -419,13 +434,6 @@ static void ide_scsi_remove(ide_drive_t *drive)
static int ide_scsi_probe(ide_drive_t *);
#ifdef CONFIG_IDE_PROC_FS
static ide_proc_entry_t idescsi_proc[] = {
{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
{ NULL, 0, NULL, NULL }
};
#endif
static ide_driver_t idescsi_driver = {
.gen_driver = {
.owner = THIS_MODULE,
......@@ -439,8 +447,8 @@ static ide_driver_t idescsi_driver = {
.end_request = idescsi_end_request,
.error = idescsi_atapi_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = idescsi_proc,
.settings = idescsi_settings,
.proc_entries = ide_scsi_proc_entries,
.proc_devsets = ide_scsi_proc_devsets,
#endif
};
......
include/asm-frv/ide.h
浏览文件 @ 72558dde
......@@ -18,15 +18,7 @@
#include <asm/io.h>
#include <asm/irq.h>
/****************************************************************************/
/*
* some bits needed for parts of the IDE subsystem to compile
*/
#define __ide_mm_insw(port, addr, n) insw((unsigned long) (port), addr, n)
#define __ide_mm_insl(port, addr, n) insl((unsigned long) (port), addr, n)
#define __ide_mm_outsw(port, addr, n) outsw((unsigned long) (port), addr, n)
#define __ide_mm_outsl(port, addr, n) outsl((unsigned long) (port), addr, n)
#include <asm-generic/ide_iops.h>
#endif /* __KERNEL__ */
#endif /* _ASM_IDE_H */
include/asm-m68k/ide.h
浏览文件 @ 72558dde
......@@ -92,15 +92,6 @@
#define outsw_swapw(port, addr, n) raw_outsw_swapw((u16 *)port, addr, n)
#endif
/* Q40 and Atari have byteswapped IDE busses and since many interesting
* values in the identification string are text, chars and words they
* happened to be almost correct without swapping.. However *_capacity
* is needed for drives over 8 GB. RZ */
#if defined(CONFIG_Q40) || defined(CONFIG_ATARI)
#define M68K_IDE_SWAPW (MACH_IS_Q40 || MACH_IS_ATARI)
#endif
#ifdef CONFIG_BLK_DEV_FALCON_IDE
#define IDE_ARCH_LOCK
......
include/asm-parisc/ide.h
浏览文件 @ 72558dde
......@@ -13,10 +13,6 @@
#ifdef __KERNEL__
#define ide_request_irq(irq,hand,flg,dev,id) request_irq((irq),(hand),(flg),(dev),(id))
#define ide_free_irq(irq,dev_id) free_irq((irq), (dev_id))
#define ide_request_region(from,extent,name) request_region((from), (extent), (name))
#define ide_release_region(from,extent) release_region((from), (extent))
/* Generic I/O and MEMIO string operations. */
#define __ide_insw insw
......
include/linux/ide.h
浏览文件 @ 72558dde
......@@ -461,12 +461,26 @@ struct ide_acpi_drive_link;
struct ide_acpi_hwif_link;
#endif
struct ide_drive_s;
struct ide_disk_ops {
int (*check)(struct ide_drive_s *, const char *);
int (*get_capacity)(struct ide_drive_s *);
void (*setup)(struct ide_drive_s *);
void (*flush)(struct ide_drive_s *);
int (*init_media)(struct ide_drive_s *, struct gendisk *);
int (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
int);
ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
sector_t);
int (*end_request)(struct ide_drive_s *, int, int);
int (*ioctl)(struct ide_drive_s *, struct inode *,
struct file *, unsigned int, unsigned long);
};
/* ATAPI device flags */
enum {
IDE_AFLAG_DRQ_INTERRUPT = (1 << 0),
IDE_AFLAG_MEDIA_CHANGED = (1 << 1),
/* Drive cannot lock the door. */
IDE_AFLAG_NO_DOORLOCK = (1 << 2),
/* ide-cd */
/* Drive cannot eject the disc. */
......@@ -498,14 +512,10 @@ enum {
IDE_AFLAG_LE_SPEED_FIELDS = (1 << 17),
/* ide-floppy */
/* Format in progress */
IDE_AFLAG_FORMAT_IN_PROGRESS = (1 << 18),
/* Avoid commands not supported in Clik drive */
IDE_AFLAG_CLIK_DRIVE = (1 << 19),
/* Requires BH algorithm for packets */
IDE_AFLAG_ZIP_DRIVE = (1 << 20),
/* Write protect */
IDE_AFLAG_WP = (1 << 21),
/* Supports format progress report */
IDE_AFLAG_SRFP = (1 << 22),
......@@ -578,7 +588,11 @@ enum {
/* don't unload heads */
IDE_DFLAG_NO_UNLOAD = (1 << 27),
/* heads unloaded, please don't reset port */
IDE_DFLAG_PARKED = (1 << 28)
IDE_DFLAG_PARKED = (1 << 28),
IDE_DFLAG_MEDIA_CHANGED = (1 << 29),
/* write protect */
IDE_DFLAG_WP = (1 << 30),
IDE_DFLAG_FORMAT_IN_PROGRESS = (1 << 31),
};
struct ide_drive_s {
......@@ -597,6 +611,8 @@ struct ide_drive_s {
#endif
struct hwif_s *hwif; /* actually (ide_hwif_t *) */
const struct ide_disk_ops *disk_ops;
unsigned long dev_flags;
unsigned long sleep; /* sleep until this time */
......@@ -1123,8 +1139,8 @@ struct ide_driver_s {
void (*resume)(ide_drive_t *);
void (*shutdown)(ide_drive_t *);
#ifdef CONFIG_IDE_PROC_FS
ide_proc_entry_t *proc;
const struct ide_proc_devset *settings;
ide_proc_entry_t * (*proc_entries)(ide_drive_t *);
const struct ide_proc_devset * (*proc_devsets)(ide_drive_t *);
#endif
};
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或