提交 7147e215 编写于 作者: A Al Viro

sh: switch to generic kernel_thread()/kernel_execve()

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
上级 ddffeb8c
......@@ -40,6 +40,8 @@ config SUPERH
select GENERIC_STRNLEN_USER
select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
select MODULES_USE_ELF_RELA
select GENERIC_KERNEL_THREAD
select GENERIC_KERNEL_EXECVE
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
......
......@@ -126,11 +126,6 @@ extern void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned lo
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
/*
* create a kernel thread without removing it from tasklists
*/
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
/* Copy and release all segment info associated with a VM */
#define copy_segments(p, mm) do { } while(0)
#define release_segments(mm) do { } while(0)
......
......@@ -159,11 +159,6 @@ struct mm_struct;
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
/*
* create a kernel thread without removing it from tasklists
*/
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
/* Copy and release all segment info associated with a VM */
#define copy_segments(p, mm) do { } while (0)
......
......@@ -16,7 +16,7 @@ obj-y := debugtraps.o dma-nommu.o dumpstack.o \
machvec.o nmi_debug.o process.o \
process_$(BITS).o ptrace.o ptrace_$(BITS).o \
reboot.o return_address.o \
setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o \
setup.o signal_$(BITS).o sys_sh.o \
syscalls_$(BITS).o time.o topology.o traps.o \
traps_$(BITS).o unwinder.o
......@@ -25,6 +25,7 @@ obj-y += iomap.o
obj-$(CONFIG_HAS_IOPORT) += ioport.o
endif
obj-$(CONFIG_SUPERH32) += sys_sh32.o
obj-y += cpu/
obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
......
......@@ -1228,6 +1228,25 @@ ret_from_fork:
pta ret_from_syscall, tr0
blink tr0, ZERO
.global ret_from_kernel_thread
ret_from_kernel_thread:
movi schedule_tail,r5
ori r5, 1, r5
ptabs r5, tr0
blink tr0, LINK
ld.q SP, FRAME_R(2), r2
ld.q SP, FRAME_R(3), r3
ptabs r3, tr0
blink tr0, LINK
ld.q SP, FRAME_S(FSPC), r2
addi r2, 4, r2 /* Move PC, being pre-execution event */
st.q SP, FRAME_S(FSPC), r2
pta ret_from_syscall, tr0
blink tr0, ZERO
syscall_allowed:
/* Use LINK to deflect the exit point, default is syscall_ret */
pta syscall_ret, tr0
......
......@@ -297,6 +297,19 @@ ret_from_fork:
mov r0, r4
bra syscall_exit
nop
.align 2
.globl ret_from_kernel_thread
ret_from_kernel_thread:
mov.l 1f, r8
jsr @r8
mov r0, r4
mov.l @(OFF_R5,r15), r5 ! fn
jsr @r5
mov.l @(OFF_R4,r15), r4 ! arg
bra syscall_exit
nop
.align 2
1: .long schedule_tail
......
......@@ -68,38 +68,6 @@ void show_regs(struct pt_regs * regs)
show_code(regs);
}
/*
* Create a kernel thread
*/
__noreturn void kernel_thread_helper(void *arg, int (*fn)(void *))
{
do_exit(fn(arg));
}
/* Don't use this in BL=1(cli). Or else, CPU resets! */
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
struct pt_regs regs;
int pid;
memset(&regs, 0, sizeof(regs));
regs.regs[4] = (unsigned long)arg;
regs.regs[5] = (unsigned long)fn;
regs.pc = (unsigned long)kernel_thread_helper;
regs.sr = SR_MD;
#if defined(CONFIG_SH_FPU)
regs.sr |= SR_FD;
#endif
/* Ok, create the new process.. */
pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
&regs, 0, NULL, NULL);
return pid;
}
EXPORT_SYMBOL(kernel_thread);
void start_thread(struct pt_regs *regs, unsigned long new_pc,
unsigned long new_sp)
{
......@@ -157,9 +125,10 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
EXPORT_SYMBOL(dump_fpu);
asmlinkage void ret_from_fork(void);
asmlinkage void ret_from_kernel_thread(void);
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
unsigned long arg,
struct task_struct *p, struct pt_regs *regs)
{
struct thread_info *ti = task_thread_info(p);
......@@ -177,29 +146,34 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
}
#endif
childregs = task_pt_regs(p);
*childregs = *regs;
memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
if (user_mode(regs)) {
childregs->regs[15] = usp;
ti->addr_limit = USER_DS;
} else {
childregs->regs[15] = (unsigned long)childregs;
childregs = task_pt_regs(p);
p->thread.sp = (unsigned long) childregs;
if (unlikely(p->flags & PF_KTHREAD)) {
memset(childregs, 0, sizeof(struct pt_regs));
p->thread.pc = (unsigned long) ret_from_kernel_thread;
childregs->regs[4] = arg;
childregs->regs[5] = usp;
childregs->sr = SR_MD;
#if defined(CONFIG_SH_FPU)
childregs->sr |= SR_FD;
#endif
ti->addr_limit = KERNEL_DS;
ti->status &= ~TS_USEDFPU;
p->fpu_counter = 0;
return 0;
}
*childregs = *regs;
childregs->regs[15] = usp;
ti->addr_limit = USER_DS;
if (clone_flags & CLONE_SETTLS)
childregs->gbr = childregs->regs[0];
childregs->regs[0] = 0; /* Set return value for child */
p->thread.sp = (unsigned long) childregs;
p->thread.pc = (unsigned long) ret_from_fork;
memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
return 0;
}
......
......@@ -284,39 +284,6 @@ void show_regs(struct pt_regs *regs)
}
}
/*
* Create a kernel thread
*/
__noreturn void kernel_thread_helper(void *arg, int (*fn)(void *))
{
do_exit(fn(arg));
}
/*
* This is the mechanism for creating a new kernel thread.
*
* NOTE! Only a kernel-only process(ie the swapper or direct descendants
* who haven't done an "execve()") should use this: it will work within
* a system call from a "real" process, but the process memory space will
* not be freed until both the parent and the child have exited.
*/
int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
{
struct pt_regs regs;
memset(&regs, 0, sizeof(regs));
regs.regs[2] = (unsigned long)arg;
regs.regs[3] = (unsigned long)fn;
regs.pc = (unsigned long)kernel_thread_helper;
regs.sr = (1 << 30);
/* Ok, create the new process.. */
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
&regs, 0, NULL, NULL);
}
EXPORT_SYMBOL(kernel_thread);
/*
* Free current thread data structures etc..
*/
......@@ -401,15 +368,17 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
EXPORT_SYMBOL(dump_fpu);
asmlinkage void ret_from_fork(void);
asmlinkage void ret_from_kernel_thread(void);
int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
unsigned long arg,
struct task_struct *p, struct pt_regs *regs)
{
struct pt_regs *childregs;
#ifdef CONFIG_SH_FPU
if(last_task_used_math == current) {
/* can't happen for a kernel thread */
if (last_task_used_math == current) {
enable_fpu();
save_fpu(current);
disable_fpu();
......@@ -419,7 +388,17 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
#endif
/* Copy from sh version */
childregs = (struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1;
p->thread.sp = (unsigned long) childregs;
if (unlikely(p->flags & PF_KTHREAD)) {
memset(childregs, 0, sizeof(struct pt_regs));
childregs->regs[2] = (unsigned long)arg;
childregs->regs[3] = (unsigned long)fn;
childregs->sr = (1 << 30); /* not user_mode */
childregs->sr |= SR_FD; /* Invalidate FPU flag */
p->thread.pc = (unsigned long) ret_from_kernel_thread;
return 0;
}
*childregs = *regs;
/*
......@@ -428,19 +407,12 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
* 32-bit wide and context switch must take care
* of NEFF sign extension.
*/
if (user_mode(regs)) {
childregs->regs[15] = neff_sign_extend(usp);
p->thread.uregs = childregs;
} else {
childregs->regs[15] =
neff_sign_extend((unsigned long)task_stack_page(p) +
THREAD_SIZE);
}
childregs->regs[15] = neff_sign_extend(usp);
p->thread.uregs = childregs;
childregs->regs[9] = 0; /* Set return value for child */
childregs->sr |= SR_FD; /* Invalidate FPU flag */
p->thread.sp = (unsigned long) childregs;
p->thread.pc = (unsigned long) ret_from_fork;
return 0;
......
......@@ -60,27 +60,3 @@ asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1,
(u64)len0 << 32 | len1, advice);
#endif
}
#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A)
#define SYSCALL_ARG3 "trapa #0x23"
#else
#define SYSCALL_ARG3 "trapa #0x13"
#endif
/*
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
int kernel_execve(const char *filename,
const char *const argv[],
const char *const envp[])
{
register long __sc0 __asm__ ("r3") = __NR_execve;
register long __sc4 __asm__ ("r4") = (long) filename;
register long __sc5 __asm__ ("r5") = (long) argv;
register long __sc6 __asm__ ("r6") = (long) envp;
__asm__ __volatile__ (SYSCALL_ARG3 : "=z" (__sc0)
: "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6)
: "memory");
return __sc0;
}
/*
* arch/sh/kernel/sys_sh64.c
*
* Copyright (C) 2000, 2001 Paolo Alberelli
*
* This file contains various random system calls that
* have a non-standard calling sequence on the Linux/SH5
* platform.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/errno.h>
#include <linux/rwsem.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
#include <linux/syscalls.h>
#include <linux/ipc.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/unistd.h>
/*
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
*/
int kernel_execve(const char *filename,
const char *const argv[],
const char *const envp[])
{
register unsigned long __sc0 __asm__ ("r9") = ((0x13 << 16) | __NR_execve);
register unsigned long __sc2 __asm__ ("r2") = (unsigned long) filename;
register unsigned long __sc3 __asm__ ("r3") = (unsigned long) argv;
register unsigned long __sc4 __asm__ ("r4") = (unsigned long) envp;
__asm__ __volatile__ ("trapa %1 !\t\t\t execve(%2,%3,%4)"
: "=r" (__sc0)
: "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4) );
__asm__ __volatile__ ("!dummy %0 %1 %2 %3"
: : "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4) : "memory");
return __sc0;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册