net: dsa: mv88e6xxx: extract FID write from ATU command

Not every ATU commands apply to an FID, thus remove the FID writing from
mv88e6xxx_atu_cmd and write it explicitly where needed, in order to ease
introduction of such commands.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6xxx.c

@@ -1036,14 +1036,10 @@ int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
 	return ret;
 }
 
-static int _mv88e6xxx_atu_cmd(struct dsa_switch *ds, int fid, u16 cmd)
+static int _mv88e6xxx_atu_cmd(struct dsa_switch *ds, u16 cmd)
 {
 	int ret;
 
-	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_FID, fid);
-	if (ret < 0)
-		return ret;
-
 	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_OP, cmd);
 	if (ret < 0)
 		return ret;
@@ -1059,7 +1055,11 @@ static int _mv88e6xxx_flush_fid(struct dsa_switch *ds, int fid)
 	if (ret < 0)
 		return ret;
 
-	return _mv88e6xxx_atu_cmd(ds, fid, GLOBAL_ATU_OP_FLUSH_NON_STATIC_DB);
+	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_FID, fid);
+	if (ret < 0)
+		return ret;
+
+	return _mv88e6xxx_atu_cmd(ds, GLOBAL_ATU_OP_FLUSH_NON_STATIC_DB);
 }
 
 static int mv88e6xxx_set_port_state(struct dsa_switch *ds, int port, u8 state)
@@ -1793,7 +1793,11 @@ static int _mv88e6xxx_atu_load(struct dsa_switch *ds,
 	if (ret < 0)
 		return ret;
 
-	return _mv88e6xxx_atu_cmd(ds, entry->fid, GLOBAL_ATU_OP_LOAD_DB);
+	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_FID, entry->fid);
+	if (ret < 0)
+		return ret;
+
+	return _mv88e6xxx_atu_cmd(ds, GLOBAL_ATU_OP_LOAD_DB);
 }
 
 static int _mv88e6xxx_port_vid_to_fid(struct dsa_switch *ds, int port, u16 vid)
@@ -1884,7 +1888,11 @@ static int _mv88e6xxx_atu_getnext(struct dsa_switch *ds, u16 fid,
 	if (ret < 0)
 		return ret;
 
-	ret = _mv88e6xxx_atu_cmd(ds, fid, GLOBAL_ATU_OP_GET_NEXT_DB);
+	ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_FID, fid);
+	if (ret < 0)
+		return ret;
+
+	ret = _mv88e6xxx_atu_cmd(ds, GLOBAL_ATU_OP_GET_NEXT_DB);
 	if (ret < 0)
 		return ret;
 
@@ -2308,9 +2316,15 @@ static int mv88e6xxx_atu_show_db(struct seq_file *s, struct dsa_switch *ds,
 		return ret;
 
 	do {
-		ret = _mv88e6xxx_atu_cmd(ds, dbnum, GLOBAL_ATU_OP_GET_NEXT_DB);
+		ret = _mv88e6xxx_reg_write(ds, REG_GLOBAL, GLOBAL_ATU_FID,
+					   dbnum);
 		if (ret < 0)
 			return ret;
+
+		ret = _mv88e6xxx_atu_cmd(ds, GLOBAL_ATU_OP_GET_NEXT_DB);
+		if (ret < 0)
+			return ret;
+
 		data = _mv88e6xxx_reg_read(ds, REG_GLOBAL, GLOBAL_ATU_DATA);
 		if (data < 0)
 			return data;