ARM: ux500: Add SDI (MMC) support to the HREF Device Tree

Here we add the Device Tree nodes which are required to successfully
probe the MMCI driver which will enable the four cards available on
ST-Ericsson's HREF hardware development platform.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

arch/arm/boot/dts/hrefv60plus.dts

@@ -77,6 +77,50 @@
 			};
 		};
 
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+
 		sound {
 			compatible = "stericsson,snd-soc-mop500";
 

arch/arm/mach-ux500/board-mop500.c

@@ -800,7 +800,6 @@ static void __init u8500_init_machine(void)
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
-		mop500_sdi_init(parent);
 		mop500_audio_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);