Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 7065e826 编写于 作者: G Greg Kroah-Hartman
浏览文件
操作

USB: serial: garmin_gps.c: remove dbg() usage 

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

CC: Johan Hovold <jhovold@gmail.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 1ad7604f
隐藏空白更改
内联 并排
Showing with 51 addition and 44 deletion
drivers/usb/serial/garmin_gps.c
浏览文件 @ 7065e826
......@@ -303,8 +303,9 @@ static int pkt_add(struct garmin_data *garmin_data_p,
state = garmin_data_p->state;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
dbg("%s - added: pkt: %d - %d bytes",
__func__, pkt->seq, data_length);
dev_dbg(&garmin_data_p->port->dev,
"%s - added: pkt: %d - %d bytes\n", __func__,
pkt->seq, data_length);
/* in serial mode, if someone is waiting for data from
the device, convert and send the next packet to tty. */
......@@ -359,7 +360,8 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
__u8 *ptr = pkt;
unsigned l = 0;
dbg("%s - pkt-id: 0x%X.", __func__, 0xFF & pkt_id);
dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__,
0xFF & pkt_id);
*ptr++ = DLE;
*ptr++ = ACK;
......@@ -399,10 +401,10 @@ static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id)
*/
static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
{
struct device *dev = &garmin_data_p->port->dev;
unsigned long flags;
const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET;
__le32 *usbdata = (__le32 *) garmin_data_p->inbuffer;
int cksum = 0;
int n = 0;
int pktid = recpkt[0];
......@@ -412,7 +414,7 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
__func__, count-GSP_INITIAL_OFFSET, recpkt);
if (size != (count-GSP_INITIAL_OFFSET-3)) {
dbg("%s - invalid size, expected %d bytes, got %d",
dev_dbg(dev, "%s - invalid size, expected %d bytes, got %d\n",
__func__, size, (count-GSP_INITIAL_OFFSET-3));
return -EINVPKT;
}
......@@ -422,8 +424,8 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
/* sanity check, remove after test ... */
if ((__u8 *)&(usbdata[3]) != recpkt) {
dbg("%s - ptr mismatch %p - %p",
__func__, &(usbdata[4]), recpkt);
dev_dbg(dev, "%s - ptr mismatch %p - %p\n", __func__,
&(usbdata[4]), recpkt);
return -EINVPKT;
}
......@@ -433,7 +435,7 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
}
if ((0xff & (cksum + *recpkt)) != 0) {
dbg("%s - invalid checksum, expected %02x, got %02x",
dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n",
__func__, 0xff & -cksum, 0xff & *recpkt);
return -EINVPKT;
}
......@@ -480,6 +482,7 @@ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count)
static int gsp_receive(struct garmin_data *garmin_data_p,
const unsigned char *buf, int count)
{
struct device *dev = &garmin_data_p->port->dev;
unsigned long flags;
int offs = 0;
int ack_or_nak_seen = 0;
......@@ -500,7 +503,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
skip = garmin_data_p->flags & FLAGS_GSP_SKIP;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
/* dbg("%s - dle=%d skip=%d size=%d count=%d",
/* dev_dbg(dev, "%s - dle=%d skip=%d size=%d count=%d\n",
__func__, dleSeen, skip, size, count); */
if (size == 0)
......@@ -530,12 +533,12 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
if (data == ACK) {
ack_or_nak_seen = ACK;
dbg("ACK packet complete.");
dev_dbg(dev, "ACK packet complete.\n");
} else if (data == NAK) {
ack_or_nak_seen = NAK;
dbg("NAK packet complete.");
dev_dbg(dev, "NAK packet complete.\n");
} else {
dbg("packet complete - id=0x%X.",
dev_dbg(dev, "packet complete - id=0x%X.\n",
0xFF & data);
gsp_rec_packet(garmin_data_p, size);
}
......@@ -557,7 +560,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
}
if (size >= GPS_IN_BUFSIZ) {
dbg("%s - packet too large.", __func__);
dev_dbg(dev, "%s - packet too large.\n", __func__);
skip = 1;
size = GSP_INITIAL_OFFSET;
dleSeen = 0;
......@@ -602,6 +605,7 @@ static int gsp_receive(struct garmin_data *garmin_data_p,
static int gsp_send(struct garmin_data *garmin_data_p,
const unsigned char *buf, int count)
{
struct device *dev = &garmin_data_p->port->dev;
const unsigned char *src;
unsigned char *dst;
int pktid = 0;
......@@ -610,12 +614,12 @@ static int gsp_send(struct garmin_data *garmin_data_p,
int i = 0;
int k;
dbg("%s - state %d - %d bytes.", __func__,
garmin_data_p->state, count);
dev_dbg(dev, "%s - state %d - %d bytes.\n", __func__,
garmin_data_p->state, count);
k = garmin_data_p->outsize;
if ((k+count) > GPS_OUT_BUFSIZ) {
dbg("packet too large");
dev_dbg(dev, "packet too large\n");
garmin_data_p->outsize = 0;
return -4;
}
......@@ -634,7 +638,7 @@ static int gsp_send(struct garmin_data *garmin_data_p,
return 0;
}
dbg("%s - %d bytes in buffer, %d bytes in pkt.", __func__, k, i);
dev_dbg(dev, "%s - %d bytes in buffer, %d bytes in pkt.\n", __func__, k, i);
/* garmin_data_p->outbuffer now contains a complete packet */
......@@ -644,18 +648,18 @@ static int gsp_send(struct garmin_data *garmin_data_p,
garmin_data_p->outsize = 0;
if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) {
dbg("not an application packet (%d)",
dev_dbg(dev, "not an application packet (%d)\n",
getLayerId(garmin_data_p->outbuffer));
return -1;
}
if (pktid > 255) {
dbg("packet-id %d too large", pktid);
dev_dbg(dev, "packet-id %d too large\n", pktid);
return -2;
}
if (datalen > 255) {
dbg("packet-size %d too large", datalen);
dev_dbg(dev, "packet-size %d too large\n", datalen);
return -3;
}
......@@ -722,7 +726,7 @@ static int gsp_next_packet(struct garmin_data *garmin_data_p)
struct garmin_packet *pkt = NULL;
while ((pkt = pkt_pop(garmin_data_p)) != NULL) {
dbg("%s - next pkt: %d", __func__, pkt->seq);
dev_dbg(&garmin_data_p->port->dev, "%s - next pkt: %d\n", __func__, pkt->seq);
result = gsp_send(garmin_data_p, pkt->data, pkt->size);
if (result > 0) {
kfree(pkt);
......@@ -768,7 +772,9 @@ static int nat_receive(struct garmin_data *garmin_data_p,
if (len >= GPS_IN_BUFSIZ) {
/* seems to be an invalid packet, ignore rest
of input */
dbg("%s - packet size too large: %d", __func__, len);
dev_dbg(&garmin_data_p->port->dev,
"%s - packet size too large: %d\n",
__func__, len);
garmin_data_p->insize = 0;
count = 0;
result = -EINVPKT;
......@@ -849,10 +855,10 @@ static int process_resetdev_request(struct usb_serial_port *port)
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
usb_kill_urb(port->interrupt_in_urb);
dbg("%s - usb_reset_device", __func__);
dev_dbg(&port->dev, "%s - usb_reset_device\n", __func__);
status = usb_reset_device(port->serial->dev);
if (status)
dbg("%s - usb_reset_device failed: %d",
dev_dbg(&port->dev, "%s - usb_reset_device failed: %d\n",
__func__, status);
return status;
}
......@@ -889,7 +895,7 @@ static int garmin_init_session(struct usb_serial_port *port)
if (status == 0) {
usb_kill_urb(port->interrupt_in_urb);
dbg("%s - adding interrupt input", __func__);
dev_dbg(&serial->dev->dev, "%s - adding interrupt input\n", __func__);
status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (status)
dev_err(&serial->dev->dev,
......@@ -902,7 +908,7 @@ static int garmin_init_session(struct usb_serial_port *port)
* gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles()
*/
if (status == 0) {
dbg("%s - starting session ...", __func__);
dev_dbg(&serial->dev->dev, "%s - starting session ...\n", __func__);
garmin_data_p->state = STATE_ACTIVE;
for (i = 0; i < 3; i++) {
......@@ -952,8 +958,8 @@ static void garmin_close(struct usb_serial_port *port)
struct usb_serial *serial = port->serial;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
dbg("%s - port %d - mode=%d state=%d flags=0x%X", __func__,
port->number, garmin_data_p->mode,
dev_dbg(&port->dev, "%s - port %d - mode=%d state=%d flags=0x%X\n",
__func__, port->number, garmin_data_p->mode,
garmin_data_p->state, garmin_data_p->flags);
if (!serial)
......@@ -1073,11 +1079,12 @@ static int garmin_write_bulk(struct usb_serial_port *port,
static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct device *dev = &port->dev;
int pktid, pktsiz, len;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
__le32 *privpkt = (__le32 *)garmin_data_p->privpkt;
usb_serial_debug_data(debug, &port->dev, __func__, count, buf);
usb_serial_debug_data(debug, dev, __func__, count, buf);
if (garmin_data_p->state == STATE_RESET)
return -EIO;
......@@ -1097,7 +1104,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
&& GARMIN_LAYERID_PRIVATE ==
getLayerId(garmin_data_p->privpkt)) {
dbg("%s - processing private request %d",
dev_dbg(dev, "%s - processing private request %d\n",
__func__, pktid);
/* drop all unfinished transfers */
......@@ -1109,7 +1116,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
if (pktsiz != 4)
return -EINVPKT;
debug = __le32_to_cpu(privpkt[3]);
dbg("%s - debug level set to 0x%X",
dev_dbg(dev, "%s - debug level set to 0x%X\n",
__func__, debug);
break;
......@@ -1117,7 +1124,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
if (pktsiz != 4)
return -EINVPKT;
garmin_data_p->mode = __le32_to_cpu(privpkt[3]);
dbg("%s - mode set to %d",
dev_dbg(dev, "%s - mode set to %d\n",
__func__, garmin_data_p->mode);
break;
......@@ -1133,7 +1140,7 @@ static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port,
if (pktsiz != 4)
return -EINVPKT;
initial_mode = __le32_to_cpu(privpkt[3]);
dbg("%s - initial_mode set to %d",
dev_dbg(dev, "%s - initial_mode set to %d\n",
__func__,
garmin_data_p->mode);
break;
......@@ -1169,7 +1176,7 @@ static void garmin_read_process(struct garmin_data *garmin_data_p,
if (garmin_data_p->flags & FLAGS_DROP_DATA) {
/* abort-transfer cmd is actice */
dbg("%s - pkt dropped", __func__);
dev_dbg(&garmin_data_p->port->dev, "%s - pkt dropped\n", __func__);
} else if (garmin_data_p->state != STATE_DISCONNECTED &&
garmin_data_p->state != STATE_RESET) {
......@@ -1178,7 +1185,7 @@ static void garmin_read_process(struct garmin_data *garmin_data_p,
send it directly to the tty port */
if (garmin_data_p->flags & FLAGS_QUEUING) {
pkt_add(garmin_data_p, data, data_length);
} else if (bulk_data ||
} else if (bulk_data ||
getLayerId(data) == GARMIN_LAYERID_APPL) {
spin_lock_irqsave(&garmin_data_p->lock, flags);
......@@ -1208,12 +1215,12 @@ static void garmin_read_bulk_callback(struct urb *urb)
int retval;
if (!serial) {
dbg("%s - bad serial pointer, exiting", __func__);
dev_dbg(&urb->dev->dev, "%s - bad serial pointer, exiting\n", __func__);
return;
}
if (status) {
dbg("%s - nonzero read bulk status received: %d",
dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n",
__func__, status);
return;
}
......@@ -1239,11 +1246,11 @@ static void garmin_read_bulk_callback(struct urb *urb)
retval = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (retval)
dev_err(&port->dev,
"%s - failed resubmitting read urb, "
"error %d\n", __func__, retval);
"%s - failed resubmitting read urb, error %d\n",
__func__, retval);
}
} else {
dbg("%s - end of bulk data", __func__);
dev_dbg(&port->dev, "%s - end of bulk data\n", __func__);
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE;
spin_unlock_irqrestore(&garmin_data_p->lock, flags);
......@@ -1268,11 +1275,11 @@ static void garmin_read_int_callback(struct urb *urb)
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
__func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
__func__, status);
return;
}
......@@ -1284,7 +1291,7 @@ static void garmin_read_int_callback(struct urb *urb)
0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY,
sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) {
dbg("%s - bulk data available.", __func__);
dev_dbg(&port->dev, "%s - bulk data available.\n", __func__);
if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
......@@ -1319,7 +1326,7 @@ static void garmin_read_int_callback(struct urb *urb)
garmin_data_p->serial_num = __le32_to_cpup(
(__le32 *)(data+GARMIN_PKTHDR_LENGTH));
dbg("%s - start-of-session reply seen - serial %u.",
dev_dbg(&port->dev, "%s - start-of-session reply seen - serial %u.\n",
__func__, garmin_data_p->serial_num);
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或