Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 70294b46 编写于 作者: D Dominik Brodowski
浏览文件
操作

[PATCH] pcmcia: remove unneeded Vcc pseudo setting 

As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
上级 4bbed523
隐藏空白更改
内联 并排
Showing with 64 addition and 207 deletion
drivers/bluetooth/bluecard_cs.c
浏览文件 @ 70294b46
......@@ -878,7 +878,6 @@ static int bluecard_attach(struct pcmcia_device *p_dev)
link->irq.Instance = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -925,7 +924,6 @@ static void bluecard_config(dev_link_t *link)
tuple_t tuple;
u_short buf[256];
cisparse_t parse;
config_info_t config;
int i, n, last_ret, last_fn;
tuple.TupleData = (cisdata_t *)buf;
......@@ -945,8 +943,6 @@ static void bluecard_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
i = pcmcia_get_configuration_info(handle, &config);
link->conf.Vcc = config.Vcc;
link->conf.ConfigIndex = 0x20;
link->io.NumPorts1 = 64;
......
drivers/bluetooth/bt3c_cs.c
浏览文件 @ 70294b46
......@@ -670,7 +670,6 @@ static int bt3c_attach(struct pcmcia_device *p_dev)
link->irq.Instance = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -728,7 +727,6 @@ static void bt3c_config(dev_link_t *link)
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, j, try, last_ret, last_fn;
tuple.TupleData = (cisdata_t *)buf;
......@@ -748,8 +746,6 @@ static void bt3c_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
i = pcmcia_get_configuration_info(handle, &config);
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *)buf;
......@@ -764,7 +760,7 @@ static void bt3c_config(dev_link_t *link)
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
......
drivers/bluetooth/btuart_cs.c
浏览文件 @ 70294b46
......@@ -598,7 +598,6 @@ static int btuart_attach(struct pcmcia_device *p_dev)
link->irq.Instance = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -656,7 +655,6 @@ static void btuart_config(dev_link_t *link)
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, j, try, last_ret, last_fn;
tuple.TupleData = (cisdata_t *)buf;
......@@ -676,8 +674,6 @@ static void btuart_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
i = pcmcia_get_configuration_info(handle, &config);
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *) buf;
......@@ -692,7 +688,7 @@ static void btuart_config(dev_link_t *link)
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
......
drivers/bluetooth/dtl1_cs.c
浏览文件 @ 70294b46
......@@ -577,7 +577,6 @@ static int dtl1_attach(struct pcmcia_device *p_dev)
link->irq.Instance = info;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -634,7 +633,6 @@ static void dtl1_config(dev_link_t *link)
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, last_ret, last_fn;
tuple.TupleData = (cisdata_t *)buf;
......@@ -654,8 +652,6 @@ static void dtl1_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
i = pcmcia_get_configuration_info(handle, &config);
link->conf.Vcc = config.Vcc;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0;
......
drivers/char/pcmcia/cm4000_cs.c
浏览文件 @ 70294b46
......@@ -1765,7 +1765,6 @@ static void cm4000_config(dev_link_t * link, int devno)
struct cm4000_dev *dev;
tuple_t tuple;
cisparse_t parse;
config_info_t conf;
u_char buf[64];
int fail_fn, fail_rc;
int rc;
......@@ -1790,16 +1789,10 @@ static void cm4000_config(dev_link_t * link, int devno)
fail_fn = ParseTuple;
goto cs_failed;
}
if ((fail_rc =
pcmcia_get_configuration_info(handle, &conf)) != CS_SUCCESS) {
fail_fn = GetConfigurationInfo;
goto cs_failed;
}
link->state |= DEV_CONFIG;
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
link->conf.Vcc = conf.Vcc;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
......
drivers/char/pcmcia/cm4040_cs.c
浏览文件 @ 70294b46
......@@ -520,7 +520,6 @@ static void reader_config(dev_link_t *link, int devno)
struct reader_dev *dev;
tuple_t tuple;
cisparse_t parse;
config_info_t conf;
u_char buf[64];
int fail_fn, fail_rc;
int rc;
......@@ -546,16 +545,10 @@ static void reader_config(dev_link_t *link, int devno)
fail_fn = ParseTuple;
goto cs_failed;
}
if ((fail_rc = pcmcia_get_configuration_info(handle, &conf))
!= CS_SUCCESS) {
fail_fn = GetConfigurationInfo;
goto cs_failed;
}
link->state |= DEV_CONFIG;
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
link->conf.Vcc = conf.Vcc;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
......
drivers/char/pcmcia/synclink_cs.c
浏览文件 @ 70294b46
......@@ -576,7 +576,6 @@ static int mgslpc_attach(struct pcmcia_device *p_dev)
link->irq.Handler = NULL;
link->conf.Attributes = 0;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -604,7 +603,6 @@ static void mgslpc_config(dev_link_t *link)
cisparse_t parse;
int last_fn, last_ret;
u_char buf[64];
config_info_t conf;
cistpl_cftable_entry_t dflt = { 0 };
cistpl_cftable_entry_t *cfg;
......@@ -626,10 +624,6 @@ static void mgslpc_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
/* get CIS configuration entry */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
......@@ -662,7 +656,6 @@ static void mgslpc_config(dev_link_t *link)
}
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 8;
link->conf.Present = PRESENT_OPTION;
......
drivers/ide/legacy/ide-cs.c
浏览文件 @ 70294b46
......@@ -122,7 +122,6 @@ static int ide_attach(struct pcmcia_device *p_dev)
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -222,7 +221,6 @@ static void ide_config(dev_link_t *link)
/* Not sure if this is right... look up the current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &stk->conf));
link->conf.Vcc = stk->conf.Vcc;
pass = io_base = ctl_base = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
......@@ -244,10 +242,10 @@ static void ide_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
......@@ -329,9 +327,8 @@ static void ide_config(dev_link_t *link)
info->node.minor = 0;
info->hd = hd;
link->dev = &info->node;
printk(KERN_INFO "ide-cs: %s: Vcc = %d.%d, Vpp = %d.%d\n",
info->node.dev_name, link->conf.Vcc / 10, link->conf.Vcc % 10,
link->conf.Vpp1 / 10, link->conf.Vpp1 % 10);
printk(KERN_INFO "ide-cs: %s: Vpp = %d.%d\n",
info->node.dev_name, link->conf.Vpp / 10, link->conf.Vpp % 10);
link->state &= ~DEV_CONFIG_PENDING;
kfree(stk);
......
drivers/isdn/hardware/avm/avm_cs.c
浏览文件 @ 70294b46
......@@ -123,7 +123,6 @@ static int avmcs_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/isdn/hisax/avma1_cs.c
浏览文件 @ 70294b46
......@@ -153,7 +153,6 @@ static int avma1cs_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/isdn/hisax/elsa_cs.c
浏览文件 @ 70294b46
......@@ -170,7 +170,6 @@ static int elsa_cs_attach(struct pcmcia_device *p_dev)
link->io.IOAddrLines = 3;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -324,11 +323,8 @@ static void elsa_cs_config(dev_link_t *link)
link->dev = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev->node.dev_name, link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
......
drivers/isdn/hisax/sedlbauer_cs.c
浏览文件 @ 70294b46
......@@ -184,7 +184,6 @@ static int sedlbauer_attach(struct pcmcia_device *p_dev)
link->conf.Attributes = 0;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -263,9 +262,7 @@ static void sedlbauer_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
/*
In this loop, we scan the CIS for configuration table entries,
......@@ -309,10 +306,10 @@ static void sedlbauer_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
......@@ -403,11 +400,10 @@ static void sedlbauer_config(dev_link_t *link)
link->dev = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev->node.dev_name, link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
printk(KERN_INFO "%s: index 0x%02x:",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
......
drivers/isdn/hisax/teles_cs.c
浏览文件 @ 70294b46
......@@ -161,7 +161,6 @@ static int teles_attach(struct pcmcia_device *p_dev)
link->io.IOAddrLines = 5;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -315,11 +314,8 @@ static void teles_cs_config(dev_link_t *link)
link->dev = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev->node.dev_name, link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
printk(KERN_INFO "%s: index 0x%02x:",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
......
drivers/mtd/maps/pcmciamtd.c
浏览文件 @ 70294b46
......@@ -587,13 +587,10 @@ static void pcmciamtd_config(dev_link_t *link)
DEBUG(2, "Vcc = %d Vpp1 = %d Vpp2 = %d", t.Vcc, t.Vpp1, t.Vpp2);
dev->vpp = (vpp) ? vpp : t.Vpp1;
link->conf.Attributes = 0;
link->conf.Vcc = t.Vcc;
if(setvpp == 2) {
link->conf.Vpp1 = dev->vpp;
link->conf.Vpp2 = dev->vpp;
link->conf.Vpp = dev->vpp;
} else {
link->conf.Vpp1 = 0;
link->conf.Vpp2 = 0;
link->conf.Vpp = 0;
}
link->conf.IntType = INT_MEMORY;
......
drivers/net/pcmcia/3c574_cs.c
浏览文件 @ 70294b46
......@@ -280,7 +280,6 @@ static int tc574_attach(struct pcmcia_device *p_dev)
link->irq.Handler = &el3_interrupt;
link->irq.Instance = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/pcmcia/3c589_cs.c
浏览文件 @ 70294b46
......@@ -194,7 +194,6 @@ static int tc589_attach(struct pcmcia_device *p_dev)
link->irq.Handler = &el3_interrupt;
link->irq.Instance = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/pcmcia/axnet_cs.c
浏览文件 @ 70294b46
......@@ -302,7 +302,6 @@ static void axnet_config(dev_link_t *link)
cisparse_t parse;
int i, j, last_ret, last_fn;
u_short buf[64];
config_info_t conf;
DEBUG(0, "axnet_config(0x%p)\n", link);
......@@ -321,10 +320,6 @@ static void axnet_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
/* Look up current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
......
drivers/net/pcmcia/com20020_cs.c
浏览文件 @ 70294b46
......@@ -178,7 +178,6 @@ static int com20020_attach(struct pcmcia_device *p_dev)
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/pcmcia/fmvj18x_cs.c
浏览文件 @ 70294b46
......@@ -257,7 +257,6 @@ static int fmvj18x_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* The FMVJ18x specific entries in the device structure. */
......@@ -396,12 +395,7 @@ static void fmvj18x_config(dev_link_t *link)
switch (le16_to_cpu(buf[0])) {
case MANFID_TDK:
cardtype = TDK;
if (le16_to_cpu(buf[1]) == PRODID_TDK_CF010) {
cs_status_t status;
pcmcia_get_status(handle, &status);
if (status.CardState & CS_EVENT_3VCARD)
link->conf.Vcc = 33; /* inserted in 3.3V slot */
} else if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
|| le16_to_cpu(buf[1]) == PRODID_TDK_NP9610
|| le16_to_cpu(buf[1]) == PRODID_TDK_MN3200) {
/* MultiFunction Card */
......
drivers/net/pcmcia/ibmtr_cs.c
浏览文件 @ 70294b46
......@@ -167,7 +167,6 @@ static int ibmtr_attach(struct pcmcia_device *p_dev)
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &tok_interrupt;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/pcmcia/nmclan_cs.c
浏览文件 @ 70294b46
......@@ -469,7 +469,6 @@ static int nmclan_attach(struct pcmcia_device *p_dev)
link->irq.Handler = &mace_interrupt;
link->irq.Instance = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/pcmcia/pcnet_cs.c
浏览文件 @ 70294b46
......@@ -531,7 +531,6 @@ static void pcnet_config(dev_link_t *link)
int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
int manfid = 0, prodid = 0, has_shmem = 0;
u_short buf[64];
config_info_t conf;
hw_info_t *hw_info;
DEBUG(0, "pcnet_config(0x%p)\n", link);
......@@ -550,10 +549,6 @@ static void pcnet_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
/* Look up current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
tuple.DesiredTuple = CISTPL_MANFID;
tuple.Attributes = TUPLE_RETURN_COMMON;
if ((pcmcia_get_first_tuple(handle, &tuple) == CS_SUCCESS) &&
......
drivers/net/pcmcia/smc91c92_cs.c
浏览文件 @ 70294b46
......@@ -334,7 +334,6 @@ static int smc91c92_attach(struct pcmcia_device *p_dev)
link->irq.Handler = &smc_interrupt;
link->irq.Instance = dev;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* The SMC91c92-specific entries in the device structure. */
......
drivers/net/pcmcia/xirc2ps_cs.c
浏览文件 @ 70294b46
......@@ -571,7 +571,6 @@ xirc2ps_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/wireless/airo_cs.c
浏览文件 @ 70294b46
......@@ -168,7 +168,6 @@ static int airo_attach(struct pcmcia_device *p_dev)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
......@@ -294,16 +293,11 @@ static void airo_config(dev_link_t *link)
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
......@@ -391,11 +385,10 @@ static void airo_config(dev_link_t *link)
link->dev = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev->node.dev_name, link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
......
drivers/net/wireless/atmel_cs.c
浏览文件 @ 70294b46
......@@ -179,7 +179,6 @@ static int atmel_attach(struct pcmcia_device *p_dev)
device, and can be hard-wired here.
*/
link->conf.Attributes = 0;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* Allocate space for private device-specific data */
......@@ -314,16 +313,11 @@ static void atmel_config(dev_link_t *link)
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* Do we need to allocate an interrupt? */
......
drivers/net/wireless/hostap/hostap_cs.c
浏览文件 @ 70294b46
......@@ -512,7 +512,6 @@ static int prism2_attach(struct pcmcia_device *p_dev)
memset(link, 0, sizeof(dev_link_t));
PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -603,9 +602,6 @@ static int prism2_config(dev_link_t *link)
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(link->handle, &conf));
PDEBUG(DEBUG_HW, "%s: %s Vcc=%d (from config)\n", dev_info,
ignore_cis_vcc ? "ignoring" : "setting", conf.Vcc);
link->conf.Vcc = conf.Vcc;
/* Look for an appropriate configuration table entry in the CIS */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
......@@ -650,10 +646,10 @@ static int prism2_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
......@@ -745,12 +741,11 @@ static int prism2_config(dev_link_t *link)
dev->base_addr = link->io.BasePort1;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev_info, link->conf.ConfigIndex,
link->conf.Vcc / 10, link->conf.Vcc % 10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
link->conf.Vpp1 % 10);
printk(KERN_INFO "%s: index 0x%02x: ",
dev_info, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp / 10,
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
......
drivers/net/wireless/netwave_cs.c
浏览文件 @ 70294b46
......@@ -406,7 +406,6 @@ static int netwave_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/wireless/orinoco_cs.c
浏览文件 @ 70294b46
......@@ -218,8 +218,7 @@ orinoco_cs_config(dev_link_t *link)
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
pcmcia_get_configuration_info(link->handle, &conf));
/*
* In this loop, we scan the CIS for configuration table
......@@ -274,10 +273,10 @@ orinoco_cs_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
......@@ -373,12 +372,11 @@ orinoco_cs_config(dev_link_t *link)
link->state &= ~DEV_CONFIG_PENDING;
/* Finally, report what we've done */
printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
dev->name, link->conf.ConfigIndex,
link->conf.Vcc / 10, link->conf.Vcc % 10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
link->conf.Vpp1 % 10);
printk(KERN_DEBUG "%s: index 0x%02x: ",
dev->name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp / 10,
link->conf.Vpp % 10);
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
......
drivers/net/wireless/ray_cs.c
浏览文件 @ 70294b46
......@@ -342,7 +342,6 @@ static int ray_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/net/wireless/spectrum_cs.c
浏览文件 @ 70294b46
......@@ -692,7 +692,6 @@ spectrum_cs_config(dev_link_t *link)
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
/*
* In this loop, we scan the CIS for configuration table
......@@ -747,10 +746,10 @@ spectrum_cs_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
......@@ -851,12 +850,11 @@ spectrum_cs_config(dev_link_t *link)
link->state &= ~DEV_CONFIG_PENDING;
/* Finally, report what we've done */
printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
dev->name, link->conf.ConfigIndex,
link->conf.Vcc / 10, link->conf.Vcc % 10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
link->conf.Vpp1 % 10);
printk(KERN_DEBUG "%s: index 0x%02x: ",
dev->name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp / 10,
link->conf.Vpp % 10);
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
......
drivers/net/wireless/wavelan_cs.c
浏览文件 @ 70294b46
......@@ -4607,7 +4607,6 @@ wavelan_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
/* Chain drivers */
......
drivers/net/wireless/wl3501_cs.c
浏览文件 @ 70294b46
......@@ -1976,7 +1976,6 @@ static int wl3501_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
drivers/parport/parport_cs.c
浏览文件 @ 70294b46
......@@ -117,7 +117,6 @@ static int parport_attach(struct pcmcia_device *p_dev)
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......@@ -168,7 +167,6 @@ void parport_config(dev_link_t *link)
tuple_t tuple;
u_short buf[128];
cisparse_t parse;
config_info_t conf;
cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
cistpl_cftable_entry_t dflt = { 0 };
struct parport *p;
......@@ -189,9 +187,6 @@ void parport_config(dev_link_t *link)
/* Configure card */
link->state |= DEV_CONFIG;
/* Not sure if this is right... look up the current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
......
drivers/pcmcia/pcmcia_resource.c
浏览文件 @ 70294b46
......@@ -618,11 +618,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
return CS_CONFIGURATION_LOCKED;
/* Do power control. We don't allow changes in Vcc. */
if (s->socket.Vcc != req->Vcc)
return CS_BAD_VCC;
if (req->Vpp1 != req->Vpp2)
return CS_BAD_VPP;
s->socket.Vpp = req->Vpp1;
s->socket.Vpp = req->Vpp;
if (s->ops->set_socket(s, &s->socket))
return CS_BAD_VPP;
......
drivers/scsi/pcmcia/aha152x_stub.c
浏览文件 @ 70294b46
......@@ -119,7 +119,6 @@ static int aha152x_attach(struct pcmcia_device *p_dev)
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
......
drivers/scsi/pcmcia/fdomain_stub.c
浏览文件 @ 70294b46
......@@ -101,7 +101,6 @@ static int fdomain_attach(struct pcmcia_device *p_dev)
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
......
drivers/scsi/pcmcia/nsp_cs.c
浏览文件 @ 70294b46
......@@ -1627,7 +1627,6 @@ static int nsp_cs_attach(struct pcmcia_device *p_dev)
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
......@@ -1709,7 +1708,6 @@ static void nsp_cs_config(dev_link_t *link)
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
......@@ -1743,10 +1741,10 @@ static void nsp_cs_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) {
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
} else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) {
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
}
......@@ -1905,11 +1903,10 @@ static void nsp_cs_config(dev_link_t *link)
#endif
/* Finally, report what we've done */
printk(KERN_INFO "nsp_cs: index 0x%02x: Vcc %d.%d",
link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1) {
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
printk(KERN_INFO "nsp_cs: index 0x%02x: ",
link->conf.ConfigIndex);
if (link->conf.Vpp) {
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
}
if (link->conf.Attributes & CONF_ENABLE_IRQ) {
printk(", irq %d", link->irq.AssignedIRQ);
......
drivers/scsi/pcmcia/qlogic_stub.c
浏览文件 @ 70294b46
......@@ -176,7 +176,6 @@ static int qlogic_attach(struct pcmcia_device *p_dev)
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
......
drivers/scsi/pcmcia/sym53c500_cs.c
浏览文件 @ 70294b46
......@@ -916,7 +916,6 @@ SYM53C500_attach(struct pcmcia_device *p_dev)
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
......
drivers/serial/serial_cs.c
浏览文件 @ 70294b46
......@@ -358,7 +358,6 @@ static int simple_config(dev_link_t *link)
return setup_serial(handle, info, port, config.AssignedIRQ);
}
}
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple->TupleData = (cisdata_t *) buf;
......@@ -374,7 +373,7 @@ static int simple_config(dev_link_t *link)
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
(cf->io.win[0].base != 0)) {
......@@ -445,7 +444,6 @@ static int multi_config(dev_link_t * link)
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
config_info_t config;
int i, rc, base2 = 0;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
......@@ -456,14 +454,6 @@ static int multi_config(dev_link_t * link)
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
i = pcmcia_get_configuration_info(handle, &config);
if (i != CS_SUCCESS) {
cs_error(handle, GetConfigurationInfo, i);
rc = -1;
goto free_cfg_mem;
}
link->conf.Vcc = config.Vcc;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
......
drivers/telephony/ixj_pcmcia.c
浏览文件 @ 70294b46
......@@ -51,7 +51,6 @@ static int ixj_attach(struct pcmcia_device *p_dev)
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = 3;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->priv = kmalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
if (!link->priv) {
......@@ -157,7 +156,6 @@ static void ixj_config(dev_link_t * link)
tuple_t tuple;
u_short buf[128];
cisparse_t parse;
config_info_t conf;
cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
cistpl_cftable_entry_t dflt =
{
......@@ -178,7 +176,6 @@ static void ixj_config(dev_link_t * link)
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
link->state |= DEV_CONFIG;
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
......
drivers/usb/host/sl811_cs.c
浏览文件 @ 70294b46
......@@ -191,7 +191,6 @@ static void sl811_cs_config(dev_link_t *link)
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
......@@ -225,10 +224,10 @@ static void sl811_cs_config(dev_link_t *link)
}
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* we need an interrupt */
......@@ -271,11 +270,10 @@ static void sl811_cs_config(dev_link_t *link)
dev->node.major = dev->node.minor = 0;
link->dev = &dev->node;
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev->node.dev_name, link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Vpp)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
printk(", irq %d", link->irq.AssignedIRQ);
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
......@@ -311,7 +309,6 @@ static int sl811_cs_attach(struct pcmcia_device *p_dev)
link->irq.Handler = NULL;
link->conf.Attributes = 0;
link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
link->handle = p_dev;
......
include/pcmcia/cs.h
浏览文件 @ 70294b46
......@@ -125,7 +125,7 @@ typedef struct modconf_t {
/* For RequestConfiguration */
typedef struct config_req_t {
u_int Attributes;
u_int Vcc, Vpp1, Vpp2;
u_int Vpp; /* both Vpp1 and Vpp2 */
u_int IntType;
u_int ConfigBase;
u_char Status, Pin, Copy, ExtStatus;
......
sound/pcmcia/pdaudiocf/pdaudiocf.c
浏览文件 @ 70294b46
......@@ -230,7 +230,6 @@ static void pdacf_config(dev_link_t *link)
struct snd_pdacf *pdacf = link->priv;
tuple_t tuple;
cisparse_t *parse = NULL;
config_info_t conf;
u_short buf[32];
int last_fn, last_ret;
......@@ -253,9 +252,6 @@ static void pdacf_config(dev_link_t *link)
link->conf.ConfigIndex = 0x5;
kfree(parse);
CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
link->conf.Vcc = conf.Vcc;
/* Configure card */
link->state |= DEV_CONFIG;
......
sound/pcmcia/vx/vxpocket.c
浏览文件 @ 70294b46
......@@ -161,7 +161,6 @@ static struct snd_vxpocket *snd_vxpocket_new(struct snd_card *card, int ibl)
link->irq.Instance = chip;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.ConfigIndex = 1;
link->conf.Present = PRESENT_OPTION;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或