提交 6f5621cb 编写于 作者: L Linus Torvalds

Merge branch 'x86-ptrace-for-linus' of...

Merge branch 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, ptrace: Remove set_stopped_child_used_math() in [x]fpregs_set
  x86, ptrace: Simplify xstateregs_get()
  ptrace: Fix ptrace_regset() comments and diagnose errors specifically
  parisc: Disable CONFIG_HAVE_ARCH_TRACEHOOK
  ptrace: Add support for generic PTRACE_GETREGSET/PTRACE_SETREGSET
  x86, ptrace: regset extensions to support xstate
......@@ -33,8 +33,16 @@ extern void init_thread_xstate(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
extern user_regset_active_fn fpregs_active, xfpregs_active;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get,
xstateregs_get;
extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
xstateregs_set;
/*
* xstateregs_active == fpregs_active. Please refer to the comment
* at the definition of fpregs_active.
*/
#define xstateregs_active fpregs_active
extern struct _fpx_sw_bytes fx_sw_reserved;
#ifdef CONFIG_IA32_EMULATION
......
#ifndef _ASM_X86_USER_H
#define _ASM_X86_USER_H
#ifdef CONFIG_X86_32
# include "user_32.h"
#else
# include "user_64.h"
#endif
#include <asm/types.h>
struct user_ymmh_regs {
/* 16 * 16 bytes for each YMMH-reg */
__u32 ymmh_space[64];
};
struct user_xsave_hdr {
__u64 xstate_bv;
__u64 reserved1[2];
__u64 reserved2[5];
};
/*
* The structure layout of user_xstateregs, used for exporting the
* extended register state through ptrace and core-dump (NT_X86_XSTATE note)
* interfaces will be same as the memory layout of xsave used by the processor
* (except for the bytes 464..511, which can be used by the software) and hence
* the size of this structure varies depending on the features supported by the
* processor and OS. The size of the structure that users need to use can be
* obtained by doing:
* cpuid_count(0xd, 0, &eax, &ptrace_xstateregs_struct_size, &ecx, &edx);
* i.e., cpuid.(eax=0xd,ecx=0).ebx will be the size that user (debuggers, etc.)
* need to use.
*
* For now, only the first 8 bytes of the software usable bytes[464..471] will
* be used and will be set to OS enabled xstate mask (which is same as the
* 64bit mask returned by the xgetbv's xCR0). Users (analyzing core dump
* remotely, etc.) can use this mask as well as the mask saved in the
* xstate_hdr bytes and interpret what states the processor/OS supports
* and what states are in modified/initialized conditions for the
* particular process/thread.
*
* Also when the user modifies certain state FP/SSE/etc through the
* ptrace interface, they must ensure that the xsave_hdr.xstate_bv
* bytes[512..519] of the memory layout are updated correspondingly.
* i.e., for example when FP state is modified to a non-init state,
* xsave_hdr.xstate_bv's bit 0 must be set to '1', when SSE is modified to
* non-init state, xsave_hdr.xstate_bv's bit 1 must to be set to '1', etc.
*/
#define USER_XSTATE_FX_SW_WORDS 6
#define USER_XSTATE_XCR0_WORD 0
struct user_xstateregs {
struct {
__u64 fpx_space[58];
__u64 xstate_fx_sw[USER_XSTATE_FX_SW_WORDS];
} i387;
struct user_xsave_hdr xsave_hdr;
struct user_ymmh_regs ymmh;
/* further processor state extensions go here */
};
#endif /* _ASM_X86_USER_H */
......@@ -27,9 +27,11 @@
extern unsigned int xstate_size;
extern u64 pcntxt_mask;
extern struct xsave_struct *init_xstate_buf;
extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
extern void xsave_cntxt_init(void);
extern void xsave_init(void);
extern void update_regset_xstate_info(unsigned int size, u64 xstate_mask);
extern int init_fpu(struct task_struct *child);
extern int check_for_xstate(struct i387_fxsave_struct __user *buf,
void __user *fpstate,
......
......@@ -164,6 +164,11 @@ int init_fpu(struct task_struct *tsk)
return 0;
}
/*
* The xstateregs_active() routine is the same as the fpregs_active() routine,
* as the "regset->n" for the xstate regset will be updated based on the feature
* capabilites supported by the xsave.
*/
int fpregs_active(struct task_struct *target, const struct user_regset *regset)
{
return tsk_used_math(target) ? regset->n : 0;
......@@ -204,8 +209,6 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
if (ret)
return ret;
set_stopped_child_used_math(target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fxsave, 0, -1);
......@@ -224,6 +227,68 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
return ret;
}
int xstateregs_get(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
int ret;
if (!cpu_has_xsave)
return -ENODEV;
ret = init_fpu(target);
if (ret)
return ret;
/*
* Copy the 48bytes defined by the software first into the xstate
* memory layout in the thread struct, so that we can copy the entire
* xstateregs to the user using one user_regset_copyout().
*/
memcpy(&target->thread.xstate->fxsave.sw_reserved,
xstate_fx_sw_bytes, sizeof(xstate_fx_sw_bytes));
/*
* Copy the xstate memory layout.
*/
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->xsave, 0, -1);
return ret;
}
int xstateregs_set(struct task_struct *target, const struct user_regset *regset,
unsigned int pos, unsigned int count,
const void *kbuf, const void __user *ubuf)
{
int ret;
struct xsave_hdr_struct *xsave_hdr;
if (!cpu_has_xsave)
return -ENODEV;
ret = init_fpu(target);
if (ret)
return ret;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->xsave, 0, -1);
/*
* mxcsr reserved bits must be masked to zero for security reasons.
*/
target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
xsave_hdr = &target->thread.xstate->xsave.xsave_hdr;
xsave_hdr->xstate_bv &= pcntxt_mask;
/*
* These bits must be zero.
*/
xsave_hdr->reserved1[0] = xsave_hdr->reserved1[1] = 0;
return ret;
}
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
/*
......@@ -404,8 +469,6 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
if (ret)
return ret;
set_stopped_child_used_math(target);
if (!HAVE_HWFP)
return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
......
......@@ -48,6 +48,7 @@ enum x86_regset {
REGSET_FP,
REGSET_XFP,
REGSET_IOPERM64 = REGSET_XFP,
REGSET_XSTATE,
REGSET_TLS,
REGSET_IOPERM32,
};
......@@ -1563,7 +1564,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
#ifdef CONFIG_X86_64
static const struct user_regset x86_64_regsets[] = {
static struct user_regset x86_64_regsets[] __read_mostly = {
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
.n = sizeof(struct user_regs_struct) / sizeof(long),
......@@ -1576,6 +1577,12 @@ static const struct user_regset x86_64_regsets[] = {
.size = sizeof(long), .align = sizeof(long),
.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
},
[REGSET_XSTATE] = {
.core_note_type = NT_X86_XSTATE,
.size = sizeof(u64), .align = sizeof(u64),
.active = xstateregs_active, .get = xstateregs_get,
.set = xstateregs_set
},
[REGSET_IOPERM64] = {
.core_note_type = NT_386_IOPERM,
.n = IO_BITMAP_LONGS,
......@@ -1601,7 +1608,7 @@ static const struct user_regset_view user_x86_64_view = {
#endif /* CONFIG_X86_64 */
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
static const struct user_regset x86_32_regsets[] = {
static struct user_regset x86_32_regsets[] __read_mostly = {
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
.n = sizeof(struct user_regs_struct32) / sizeof(u32),
......@@ -1620,6 +1627,12 @@ static const struct user_regset x86_32_regsets[] = {
.size = sizeof(u32), .align = sizeof(u32),
.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
},
[REGSET_XSTATE] = {
.core_note_type = NT_X86_XSTATE,
.size = sizeof(u64), .align = sizeof(u64),
.active = xstateregs_active, .get = xstateregs_get,
.set = xstateregs_set
},
[REGSET_TLS] = {
.core_note_type = NT_386_TLS,
.n = GDT_ENTRY_TLS_ENTRIES, .bias = GDT_ENTRY_TLS_MIN,
......@@ -1642,6 +1655,23 @@ static const struct user_regset_view user_x86_32_view = {
};
#endif
/*
* This represents bytes 464..511 in the memory layout exported through
* the REGSET_XSTATE interface.
*/
u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
void update_regset_xstate_info(unsigned int size, u64 xstate_mask)
{
#ifdef CONFIG_X86_64
x86_64_regsets[REGSET_XSTATE].n = size / sizeof(u64);
#endif
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
x86_32_regsets[REGSET_XSTATE].n = size / sizeof(u64);
#endif
xstate_fx_sw_bytes[USER_XSTATE_XCR0_WORD] = xstate_mask;
}
const struct user_regset_view *task_user_regset_view(struct task_struct *task)
{
#ifdef CONFIG_IA32_EMULATION
......
......@@ -337,6 +337,7 @@ void __ref xsave_cntxt_init(void)
cpuid_count(0xd, 0, &eax, &ebx, &ecx, &edx);
xstate_size = ebx;
update_regset_xstate_info(xstate_size, pcntxt_mask);
prepare_fx_sw_frame();
setup_xstate_init();
......
......@@ -349,7 +349,11 @@ typedef struct elf64_shdr {
#define ELF_OSABI ELFOSABI_NONE
#endif
/* Notes used in ET_CORE */
/*
* Notes used in ET_CORE. Architectures export some of the arch register sets
* using the corresponding note types via the PTRACE_GETREGSET and
* PTRACE_SETREGSET requests.
*/
#define NT_PRSTATUS 1
#define NT_PRFPREG 2
#define NT_PRPSINFO 3
......@@ -361,6 +365,7 @@ typedef struct elf64_shdr {
#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */
#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */
#define NT_S390_TIMER 0x301 /* s390 timer register */
#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */
......
......@@ -27,6 +27,26 @@
#define PTRACE_GETSIGINFO 0x4202
#define PTRACE_SETSIGINFO 0x4203
/*
* Generic ptrace interface that exports the architecture specific regsets
* using the corresponding NT_* types (which are also used in the core dump).
* Please note that the NT_PRSTATUS note type in a core dump contains a full
* 'struct elf_prstatus'. But the user_regset for NT_PRSTATUS contains just the
* elf_gregset_t that is the pr_reg field of 'struct elf_prstatus'. For all the
* other user_regset flavors, the user_regset layout and the ELF core dump note
* payload are exactly the same layout.
*
* This interface usage is as follows:
* struct iovec iov = { buf, len};
*
* ret = ptrace(PTRACE_GETREGSET/PTRACE_SETREGSET, pid, NT_XXX_TYPE, &iov);
*
* On the successful completion, iov.len will be updated by the kernel,
* specifying how much the kernel has written/read to/from the user's iov.buf.
*/
#define PTRACE_GETREGSET 0x4204
#define PTRACE_SETREGSET 0x4205
/* options set using PTRACE_SETOPTIONS */
#define PTRACE_O_TRACESYSGOOD 0x00000001
#define PTRACE_O_TRACEFORK 0x00000002
......
......@@ -22,6 +22,7 @@
#include <linux/pid_namespace.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/regset.h>
/*
......@@ -511,6 +512,47 @@ static int ptrace_resume(struct task_struct *child, long request, long data)
return 0;
}
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
static const struct user_regset *
find_regset(const struct user_regset_view *view, unsigned int type)
{
const struct user_regset *regset;
int n;
for (n = 0; n < view->n; ++n) {
regset = view->regsets + n;
if (regset->core_note_type == type)
return regset;
}
return NULL;
}
static int ptrace_regset(struct task_struct *task, int req, unsigned int type,
struct iovec *kiov)
{
const struct user_regset_view *view = task_user_regset_view(task);
const struct user_regset *regset = find_regset(view, type);
int regset_no;
if (!regset || (kiov->iov_len % regset->size) != 0)
return -EINVAL;
regset_no = regset - view->regsets;
kiov->iov_len = min(kiov->iov_len,
(__kernel_size_t) (regset->n * regset->size));
if (req == PTRACE_GETREGSET)
return copy_regset_to_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
else
return copy_regset_from_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
}
#endif
int ptrace_request(struct task_struct *child, long request,
long addr, long data)
{
......@@ -573,6 +615,26 @@ int ptrace_request(struct task_struct *child, long request,
return 0;
return ptrace_resume(child, request, SIGKILL);
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
case PTRACE_GETREGSET:
case PTRACE_SETREGSET:
{
struct iovec kiov;
struct iovec __user *uiov = (struct iovec __user *) data;
if (!access_ok(VERIFY_WRITE, uiov, sizeof(*uiov)))
return -EFAULT;
if (__get_user(kiov.iov_base, &uiov->iov_base) ||
__get_user(kiov.iov_len, &uiov->iov_len))
return -EFAULT;
ret = ptrace_regset(child, request, addr, &kiov);
if (!ret)
ret = __put_user(kiov.iov_len, &uiov->iov_len);
break;
}
#endif
default:
break;
}
......@@ -711,6 +773,32 @@ int compat_ptrace_request(struct task_struct *child, compat_long_t request,
else
ret = ptrace_setsiginfo(child, &siginfo);
break;
#ifdef CONFIG_HAVE_ARCH_TRACEHOOK
case PTRACE_GETREGSET:
case PTRACE_SETREGSET:
{
struct iovec kiov;
struct compat_iovec __user *uiov =
(struct compat_iovec __user *) datap;
compat_uptr_t ptr;
compat_size_t len;
if (!access_ok(VERIFY_WRITE, uiov, sizeof(*uiov)))
return -EFAULT;
if (__get_user(ptr, &uiov->iov_base) ||
__get_user(len, &uiov->iov_len))
return -EFAULT;
kiov.iov_base = compat_ptr(ptr);
kiov.iov_len = len;
ret = ptrace_regset(child, request, addr, &kiov);
if (!ret)
ret = __put_user(kiov.iov_len, &uiov->iov_len);
break;
}
#endif
default:
ret = ptrace_request(child, request, addr, data);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册