net: dsa: Make mv88e6xxx use nested mdiobus read/write

Make the mv88e6xxx driver use the previously introduced nested
variants of mdiobus_read/write functions.
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6xxx.c

@@ -24,34 +24,6 @@
 #include <net/switchdev.h>
 #include "mv88e6xxx.h"
 
-/* MDIO bus access can be nested in the case of PHYs connected to the
- * internal MDIO bus of the switch, which is accessed via MDIO bus of
- * the Ethernet interface. Avoid lockdep false positives by using
- * mutex_lock_nested().
- */
-static int mv88e6xxx_mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
-{
-	int ret;
-
-	mutex_lock_nested(&bus->mdio_lock, SINGLE_DEPTH_NESTING);
-	ret = bus->read(bus, addr, regnum);
-	mutex_unlock(&bus->mdio_lock);
-
-	return ret;
-}
-
-static int mv88e6xxx_mdiobus_write(struct mii_bus *bus, int addr, u32 regnum,
-				   u16 val)
-{
-	int ret;
-
-	mutex_lock_nested(&bus->mdio_lock, SINGLE_DEPTH_NESTING);
-	ret = bus->write(bus, addr, regnum, val);
-	mutex_unlock(&bus->mdio_lock);
-
-	return ret;
-}
-
 /* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
  * use all 32 SMI bus addresses on its SMI bus, and all switch registers
  * will be directly accessible on some {device address,register address}
@@ -66,7 +38,7 @@ static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr)
 	int i;
 
 	for (i = 0; i < 16; i++) {
-		ret = mv88e6xxx_mdiobus_read(bus, sw_addr, SMI_CMD);
+		ret = mdiobus_read_nested(bus, sw_addr, SMI_CMD);
 		if (ret < 0)
 			return ret;
 
@@ -82,7 +54,7 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
 	int ret;
 
 	if (sw_addr == 0)
-		return mv88e6xxx_mdiobus_read(bus, addr, reg);
+		return mdiobus_read_nested(bus, addr, reg);
 
 	/* Wait for the bus to become free. */
 	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
@@ -90,8 +62,8 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
 		return ret;
 
 	/* Transmit the read command. */
-	ret = mv88e6xxx_mdiobus_write(bus, sw_addr, SMI_CMD,
-				      SMI_CMD_OP_22_READ | (addr << 5) | reg);
+	ret = mdiobus_write_nested(bus, sw_addr, SMI_CMD,
+				   SMI_CMD_OP_22_READ | (addr << 5) | reg);
 	if (ret < 0)
 		return ret;
 
@@ -101,7 +73,7 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
 		return ret;
 
 	/* Read the data. */
-	ret = mv88e6xxx_mdiobus_read(bus, sw_addr, SMI_DATA);
+	ret = mdiobus_read_nested(bus, sw_addr, SMI_DATA);
 	if (ret < 0)
 		return ret;
 
@@ -145,7 +117,7 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
 	int ret;
 
 	if (sw_addr == 0)
-		return mv88e6xxx_mdiobus_write(bus, addr, reg, val);
+		return mdiobus_write_nested(bus, addr, reg, val);
 
 	/* Wait for the bus to become free. */
 	ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
@@ -153,13 +125,13 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
 		return ret;
 
 	/* Transmit the data to write. */
-	ret = mv88e6xxx_mdiobus_write(bus, sw_addr, SMI_DATA, val);
+	ret = mdiobus_write_nested(bus, sw_addr, SMI_DATA, val);
 	if (ret < 0)
 		return ret;
 
 	/* Transmit the write command. */
-	ret = mv88e6xxx_mdiobus_write(bus, sw_addr, SMI_CMD,
-				      SMI_CMD_OP_22_WRITE | (addr << 5) | reg);
+	ret = mdiobus_write_nested(bus, sw_addr, SMI_CMD,
+				   SMI_CMD_OP_22_WRITE | (addr << 5) | reg);
 	if (ret < 0)
 		return ret;