提交 6bdcc6e6 编写于 作者: T Trent Piepho 提交者: Mauro Carvalho Chehab

V4L/DVB (5363): Dvb: Remove lgh06xf driver

The code of the dvb-pll driver and the lgh06xf driver is nearly
identical.  The main difference is that the lgh06xf driver would set the
AGC TOP value on every tune call.  The dvb-pll driver now has the ability
to set the AGC TOP when the front-end device is opened, which is a better
way to go about it.  By using this ability of dvb-pll, the lgh06xf driver
is made unnecessary.

There is one other difference.  dvb-pll will probe for the presence of an
I2C pll chip by doing a one byte read, the lgh06xf driver did not do
this.  In some devices the PLL is not reachable over I2C at the timer the
tuner is attached.  Some more initialization, such as firmware loading,
must take place first.  None of the devices using a LG-H06xF should have
this problem.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Acked-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 26aed922
......@@ -9,7 +9,6 @@ config DVB_B2C2_FLEXCOP
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_BCM3510 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
......
......@@ -14,7 +14,6 @@
#include "stv0297.h"
#include "mt312.h"
#include "lgdt330x.h"
#include "lgh06xf.h"
#include "dvb-pll.h"
/* lnb control */
......@@ -507,7 +506,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
/* try the air atsc 3nd generation (lgdt3303) */
if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_AIR_ATSC3;
dvb_attach(lgh06xf_attach, fc->fe, &fc->i2c_adap);
dvb_attach(dvb_pll_attach, fc->fe, 0x61, &fc->i2c_adap, &dvb_pll_lg_tdvs_h06xf);
info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
} else
/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
......
......@@ -7,7 +7,7 @@ config DVB_BT8XX
select DVB_CX24110 if !DVB_FE_CUSTOMISE
select DVB_OR51211 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
select DVB_PLL
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select FW_LOADER
help
......
......@@ -610,7 +610,8 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
lgdt330x_reset(card);
card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter);
if (card->fe != NULL) {
dvb_attach(lgh06xf_attach, card->fe, card->i2c_adapter);
dvb_attach(dvb_pll_attach, card->fe, 0x61,
card->i2c_adapter, &dvb_pll_lg_tdvs_h06xf);
dprintk ("dvb_bt8xx: lgdt330x detected\n");
}
break;
......
......@@ -37,8 +37,8 @@
#include "cx24110.h"
#include "or51211.h"
#include "lgdt330x.h"
#include "lgh06xf.h"
#include "zl10353.h"
#include "dvb-pll.h"
struct dvb_bt8xx_card {
struct mutex lock;
......
......@@ -101,7 +101,6 @@ config DVB_USB_CXUSB
select DVB_PLL
select DVB_CX22702 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
help
......
......@@ -27,7 +27,6 @@
#include "cx22702.h"
#include "lgdt330x.h"
#include "lgh06xf.h"
#include "mt352.h"
#include "mt352_priv.h"
#include "zl10353.h"
......@@ -388,7 +387,8 @@ static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap)
static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
{
dvb_attach(lgh06xf_attach, adap->fe, &adap->dev->i2c_adap);
dvb_attach(dvb_pll_attach, adap->fe, 0x61, &adap->dev->i2c_adap,
&dvb_pll_lg_tdvs_h06xf);
return 0;
}
......
......@@ -315,14 +315,6 @@ config DVB_TUNER_MT2060
help
A driver for the silicon IF tuner MT2060 from Microtune.
config DVB_TUNER_LGH06XF
tristate "LG TDVS-H06xF ATSC tuner"
depends on DVB_CORE && I2C
select DVB_PLL
default m if DVB_FE_CUSTOMISE
help
A driver for the LG TDVS-H06xF ATSC tuner family.
comment "Miscellaneous devices"
depends on DVB_CORE
......
......@@ -41,4 +41,3 @@ obj-$(CONFIG_DVB_TDA827X) += tda827x.o
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
obj-$(CONFIG_DVB_TUA6100) += tua6100.o
obj-$(CONFIG_DVB_TUNER_LGH06XF) += lgh06xf.o
......@@ -245,6 +245,7 @@ struct dvb_pll_desc dvb_pll_lg_tdvs_h06xf = {
.name = "LG TDVS-H06xF",
.min = 54000000,
.max = 863000000,
.initdata = tua603x_agc103,
.count = 3,
.entries = {
{ 165000000, 44000000, 62500, 0xce, 0x01 },
......
/*
* lgh06xf.c - ATSC Tuner support for LG TDVS-H06xF
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "dvb-pll.h"
#include "lgh06xf.h"
#define LG_H06XF_PLL_I2C_ADDR 0x61
struct lgh06xf_priv {
struct i2c_adapter *i2c;
u32 frequency;
};
static int lgh06xf_release(struct dvb_frontend *fe)
{
kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
return 0;
}
static int lgh06xf_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
struct lgh06xf_priv *priv = fe->tuner_priv;
u8 buf[4];
struct i2c_msg msg = { .addr = LG_H06XF_PLL_I2C_ADDR, .flags = 0,
.buf = buf, .len = sizeof(buf) };
u32 frequency;
int result;
if ((result = dvb_pll_configure(&dvb_pll_lg_tdvs_h06xf, buf,
params->frequency, 0)) < 0)
return result;
else
frequency = result;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgh06xf: %s error "
"(addr %02x <- %02x, result = %i)\n",
__FUNCTION__, buf[0], buf[1], result);
if (result < 0)
return result;
else
return -EREMOTEIO;
}
/* Set the Auxiliary Byte. */
buf[0] = buf[2];
buf[0] &= ~0x20;
buf[0] |= 0x18;
buf[1] = 0x50;
msg.len = 2;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgh06xf: %s error "
"(addr %02x <- %02x, result = %i)\n",
__FUNCTION__, buf[0], buf[1], result);
if (result < 0)
return result;
else
return -EREMOTEIO;
}
priv->frequency = frequency;
return 0;
}
static int lgh06xf_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct lgh06xf_priv *priv = fe->tuner_priv;
*frequency = priv->frequency;
return 0;
}
static struct dvb_tuner_ops lgh06xf_tuner_ops = {
.release = lgh06xf_release,
.set_params = lgh06xf_set_params,
.get_frequency = lgh06xf_get_frequency,
};
struct dvb_frontend* lgh06xf_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c)
{
struct lgh06xf_priv *priv = NULL;
priv = kzalloc(sizeof(struct lgh06xf_priv), GFP_KERNEL);
if (priv == NULL)
return NULL;
priv->i2c = i2c;
memcpy(&fe->ops.tuner_ops, &lgh06xf_tuner_ops,
sizeof(struct dvb_tuner_ops));
strlcpy(fe->ops.tuner_ops.info.name, dvb_pll_lg_tdvs_h06xf.name,
sizeof(fe->ops.tuner_ops.info.name));
fe->ops.tuner_ops.info.frequency_min = dvb_pll_lg_tdvs_h06xf.min;
fe->ops.tuner_ops.info.frequency_max = dvb_pll_lg_tdvs_h06xf.max;
fe->tuner_priv = priv;
return fe;
}
EXPORT_SYMBOL(lgh06xf_attach);
MODULE_DESCRIPTION("LG TDVS-H06xF ATSC Tuner support");
MODULE_AUTHOR("Michael Krufky");
MODULE_LICENSE("GPL");
/*
* Local variables:
* c-basic-offset: 8
* End:
*/
/*
* lgh06xf.h - ATSC Tuner support for LG TDVS-H06xF
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _LGH06XF_H_
#define _LGH06XF_H_
#include "dvb_frontend.h"
#if defined(CONFIG_DVB_TUNER_LGH06XF) || (defined(CONFIG_DVB_TUNER_LGH06XF_MODULE) && defined(MODULE))
extern struct dvb_frontend* lgh06xf_attach(struct dvb_frontend* fe,
struct i2c_adapter *i2c);
#else
static inline struct dvb_frontend* lgh06xf_attach(struct dvb_frontend* fe,
struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
return NULL;
}
#endif /* CONFIG_DVB_TUNER_LGH06XF */
#endif /* _LGH06XF_H_ */
......@@ -53,7 +53,6 @@ config VIDEO_CX88_DVB
select DVB_OR51132 if !DVB_FE_CUSTOMISE
select DVB_CX22702 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
......
......@@ -42,7 +42,6 @@
#include "cx22702.h"
#include "or51132.h"
#include "lgdt330x.h"
#include "lgh06xf.h"
#include "nxt200x.h"
#include "cx24123.h"
#include "isl6421.h"
......@@ -631,8 +630,9 @@ static int dvb_register(struct cx8802_dev *dev)
&fusionhdtv_5_gold,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(lgh06xf_attach, dev->dvb.frontend,
&dev->core->i2c_adap);
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_lg_tdvs_h06xf);
}
}
break;
......@@ -650,8 +650,9 @@ static int dvb_register(struct cx8802_dev *dev)
&pchdtv_hd5500,
&dev->core->i2c_adap);
if (dev->dvb.frontend != NULL) {
dvb_attach(lgh06xf_attach, dev->dvb.frontend,
&dev->core->i2c_adap);
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
&dev->core->i2c_adap,
&dvb_pll_lg_tdvs_h06xf);
}
}
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册