Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual."

This reverts commit 5d910426.

Nicolas Ferre <nicolas.ferre@atmel.com> wrote:
"Unfortunately this is not true for all the SoC that embed the
atmel_lcdfb... So I may need to rework this patch but it is certainly
not applicable in the current form."
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

arch/arm/mach-at91/board-cap9adk.c

@@ -299,7 +299,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
 
-		.left_margin	= 1,		.right_margin	= 34,
+		.left_margin	= 1,		.right_margin	= 33,
 		.upper_margin	= 1,		.lower_margin	= 0,
 		.hsync_len	= 5,		.vsync_len	= 1,
 

arch/arm/mach-at91/board-neocore926.c

@@ -230,7 +230,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(5000),
 
-		.left_margin	= 1,		.right_margin	= 34,
+		.left_margin	= 1,		.right_margin	= 33,
 		.upper_margin	= 1,		.lower_margin	= 0,
 		.hsync_len	= 5,		.vsync_len	= 1,
 

arch/arm/mach-at91/board-sam9261ek.c

@@ -365,7 +365,7 @@ static struct fb_videomode at91_stn_modes[] = {
 		.xres           = 320,          .yres           = 240,
 		.pixclock       = KHZ2PICOS(1440),
 
-		.left_margin    = 1,            .right_margin   = 2,
+		.left_margin    = 1,            .right_margin   = 1,
 		.upper_margin   = 0,            .lower_margin   = 0,
 		.hsync_len      = 1,            .vsync_len      = 1,
 
@@ -426,7 +426,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
 
-		.left_margin	= 1,		.right_margin	= 34,
+		.left_margin	= 1,		.right_margin	= 33,
 		.upper_margin	= 1,		.lower_margin	= 0,
 		.hsync_len	= 5,		.vsync_len	= 1,
 

arch/arm/mach-at91/board-sam9263ek.c

@@ -253,7 +253,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
 
-		.left_margin	= 1,		.right_margin	= 34,
+		.left_margin	= 1,		.right_margin	= 33,
 		.upper_margin	= 1,		.lower_margin	= 0,
 		.hsync_len	= 5,		.vsync_len	= 1,
 

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -192,7 +192,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 		.xres		= 480,		.yres		= 272,
 		.pixclock	= KHZ2PICOS(9000),
 
-		.left_margin	= 1,		.right_margin	= 2,
+		.left_margin	= 1,		.right_margin	= 1,
 		.upper_margin	= 40,		.lower_margin	= 1,
 		.hsync_len	= 45,		.vsync_len	= 1,
 

arch/arm/mach-at91/board-sam9rlek.c

@@ -149,7 +149,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
 
-		.left_margin	= 1,		.right_margin	= 34,
+		.left_margin	= 1,		.right_margin	= 33,
 		.upper_margin	= 1,		.lower_margin	= 0,
 		.hsync_len	= 5,		.vsync_len	= 1,
 

drivers/video/atmel_lcdfb.c

@@ -400,7 +400,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
 	var->lower_margin = min_t(u32, var->lower_margin,
 			ATMEL_LCDC_VFP);
 	var->right_margin = min_t(u32, var->right_margin,
-			(ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 2);
+			(ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
 	var->hsync_len = min_t(u32, var->hsync_len,
 			(ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
 	var->left_margin = min_t(u32, var->left_margin,
@@ -585,7 +585,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
 	lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
 
 	/* Horizontal timing */
-	value = (info->var.right_margin - 2) << ATMEL_LCDC_HFP_OFFSET;
+	value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
 	value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
 	value |= (info->var.left_margin - 1);
 	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);