提交 69a80d3f 编写于 作者: P Paul Mackerras

powerpc: move pSeries files to arch/powerpc/platforms/pseries

Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 ab1f9dac
......@@ -4,4 +4,5 @@ endif
obj-$(CONFIG_4xx) += 4xx/
obj-$(CONFIG_83xx) += 83xx/
obj-$(CONFIG_85xx) += 85xx/
obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \
setup.o iommu.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_IBMVIO) += vio.o
......@@ -64,8 +64,8 @@
#include <asm/pmc.h>
#include <asm/mpic.h>
#include <asm/ppc-pci.h>
#include "i8259.h"
#include <asm/i8259.h>
#include <asm/udbg.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
......@@ -124,7 +124,7 @@ static int pSeries_irq_cascade(struct pt_regs *regs, void *data)
if (chrp_int_ack_special)
return readb(chrp_int_ack_special);
else
return i8259_irq(smp_processor_id());
return i8259_irq(regs);
}
static void __init pSeries_init_mpic(void)
......
/*
* SMP support for pSeries and BPA machines.
* SMP support for pSeries machines.
*
* Dave Engebretsen, Peter Bergner, and
* Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
......@@ -48,8 +48,6 @@
#include <asm/pSeries_reconfig.h>
#include <asm/mpic.h>
#include "bpa_iic.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
......@@ -343,36 +341,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
}
#endif /* CONFIG_XICS */
#ifdef CONFIG_BPA_IIC
static void smp_iic_message_pass(int target, int msg)
{
unsigned int i;
if (target < NR_CPUS) {
iic_cause_IPI(target, msg);
} else {
for_each_online_cpu(i) {
if (target == MSG_ALL_BUT_SELF
&& i == smp_processor_id())
continue;
iic_cause_IPI(i, msg);
}
}
}
static int __init smp_iic_probe(void)
{
iic_request_IPIs();
return cpus_weight(cpu_possible_map);
}
static void __devinit smp_iic_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
iic_setup_cpu();
}
#endif /* CONFIG_BPA_IIC */
static DEFINE_SPINLOCK(timebase_lock);
static unsigned long timebase = 0;
......@@ -444,15 +412,6 @@ static struct smp_ops_t pSeries_xics_smp_ops = {
.cpu_bootable = smp_pSeries_cpu_bootable,
};
#endif
#ifdef CONFIG_BPA_IIC
static struct smp_ops_t bpa_iic_smp_ops = {
.message_pass = smp_iic_message_pass,
.probe = smp_iic_probe,
.kick_cpu = smp_pSeries_kick_cpu,
.setup_cpu = smp_iic_setup_cpu,
.cpu_bootable = smp_pSeries_cpu_bootable,
};
#endif
/* This is called very early */
void __init smp_init_pSeries(void)
......@@ -471,11 +430,6 @@ void __init smp_init_pSeries(void)
case IC_PPC_XIC:
smp_ops = &pSeries_xics_smp_ops;
break;
#endif
#ifdef CONFIG_BPA_IIC
case IC_BPA_IIC:
smp_ops = &bpa_iic_smp_ops;
break;
#endif
default:
panic("Invalid interrupt controller");
......
......@@ -24,9 +24,7 @@ obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y)
obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o i8259.o prom_init.o
obj-$(CONFIG_PPC_PSERIES) += pSeries_pci.o pSeries_lpar.o pSeries_hvCall.o \
pSeries_nvram.o rtasd.o ras.o pSeries_reconfig.o \
pSeries_setup.o pSeries_iommu.o udbg_16550.o
obj-$(CONFIG_PPC_PSERIES) += rtasd.o ras.o udbg_16550.o
obj-$(CONFIG_PPC_BPA) += bpa_setup.o bpa_iommu.o bpa_nvram.o \
bpa_iic.o spider-pic.o
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册