Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (25 commits)
  MIPS: Use GCC __builtin_prefetch() to implement prefetch().
  MIPS: Octeon: Serial port fixes for OCTEON simulator.
  MIPS: Octeon: Get rid of early serial.
  MIPS: AR7: prevent race between clock initialization and devices registration
  MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base address
  MIPS: BCM63xx: Avoid namespace clash on GPIO_DIR_{IN,OUT}
  MIPS: MTX-1: Update defconfig
  MIPS: BCM47xx: Update defconfig
  MIPS: RB532: Update defconfig
  MIPS: AR7: Update defconfig
  RTC: rtc-cmos: Fix binary mode support
  MIPS: Oprofile: Loongson: Cleanup the comments
  MIPS: Oprofile: Loongson: Cleanup of the macros
  MIPS: Oprofile: Loongson: Remove unused variable from loongson2_cpu_setup()
  MIPS: Oprofile: Loongson: Remove useless parentheses
  MIPS: Oprofile: Loongson: Unify macro for setting events
  MIPS: nofpu and nodsp only affect CPU0
  MIPS: Clean up tables for bootmem allocation
  MIPS: Coding style cleanups of access of FCSR rounding mode bits
  MIPS: Loongson 2F: Add gpio/gpioilb support
  ...

arch/mips/Kconfig

@@ -1075,6 +1075,8 @@ config CPU_LOONGSON2F
 	bool "Loongson 2F"
 	depends on SYS_HAS_CPU_LOONGSON2F
 	select CPU_LOONGSON2
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  The Loongson 2F processor implements the MIPS III instruction set
 	  with many extensions.

arch/mips/alchemy/common/dbdma.c

@@ -36,6 +36,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/sysdev.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 
@@ -174,10 +175,6 @@ static dbdev_tab_t dbdev_tab[] = {
 
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
-#ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
-#endif
-
 
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 
@@ -960,29 +957,37 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	return nbytes;
 }
 
-#ifdef CONFIG_PM
-void au1xxx_dbdma_suspend(void)
+
+struct alchemy_dbdma_sysdev {
+	struct sys_device sysdev;
+	u32 pm_regs[NUM_DBDMA_CHANS + 1][6];
+};
+
+static int alchemy_dbdma_suspend(struct sys_device *dev,
+				 pm_message_t state)
 {
+	struct alchemy_dbdma_sysdev *sdev =
+		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
 	u32 addr;
 
 	addr = DDMA_GLOBAL_BASE;
-	au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
-	au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
-	au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
-	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
+	sdev->pm_regs[0][0] = au_readl(addr + 0x00);
+	sdev->pm_regs[0][1] = au_readl(addr + 0x04);
+	sdev->pm_regs[0][2] = au_readl(addr + 0x08);
+	sdev->pm_regs[0][3] = au_readl(addr + 0x0c);
 
 	/* save channel configurations */
 	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
-		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
-		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
-		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
-		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
-		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
+		sdev->pm_regs[i][0] = au_readl(addr + 0x00);
+		sdev->pm_regs[i][1] = au_readl(addr + 0x04);
+		sdev->pm_regs[i][2] = au_readl(addr + 0x08);
+		sdev->pm_regs[i][3] = au_readl(addr + 0x0c);
+		sdev->pm_regs[i][4] = au_readl(addr + 0x10);
+		sdev->pm_regs[i][5] = au_readl(addr + 0x14);
 
 		/* halt channel */
-		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
+		au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00);
 		au_sync();
 		while (!(au_readl(addr + 0x14) & 1))
 			au_sync();
@@ -992,32 +997,65 @@ void au1xxx_dbdma_suspend(void)
 	/* disable channel interrupts */
 	au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
 	au_sync();
+
+	return 0;
 }
 
-void au1xxx_dbdma_resume(void)
+static int alchemy_dbdma_resume(struct sys_device *dev)
 {
+	struct alchemy_dbdma_sysdev *sdev =
+		container_of(dev, struct alchemy_dbdma_sysdev, sysdev);
 	int i;
 	u32 addr;
 
 	addr = DDMA_GLOBAL_BASE;
-	au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
-	au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
-	au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
-	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
+	au_writel(sdev->pm_regs[0][0], addr + 0x00);
+	au_writel(sdev->pm_regs[0][1], addr + 0x04);
+	au_writel(sdev->pm_regs[0][2], addr + 0x08);
+	au_writel(sdev->pm_regs[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
 	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
-		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
-		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
-		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
-		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
-		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
-		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
+		au_writel(sdev->pm_regs[i][0], addr + 0x00);
+		au_writel(sdev->pm_regs[i][1], addr + 0x04);
+		au_writel(sdev->pm_regs[i][2], addr + 0x08);
+		au_writel(sdev->pm_regs[i][3], addr + 0x0c);
+		au_writel(sdev->pm_regs[i][4], addr + 0x10);
+		au_writel(sdev->pm_regs[i][5], addr + 0x14);
 		au_sync();
 		addr += 0x100;	/* next channel base */
 	}
+
+	return 0;
+}
+
+static struct sysdev_class alchemy_dbdma_sysdev_class = {
+	.name		= "dbdma",
+	.suspend	= alchemy_dbdma_suspend,
+	.resume		= alchemy_dbdma_resume,
+};
+
+static int __init alchemy_dbdma_sysdev_init(void)
+{
+	struct alchemy_dbdma_sysdev *sdev;
+	int ret;
+
+	ret = sysdev_class_register(&alchemy_dbdma_sysdev_class);
+	if (ret)
+		return ret;
+
+	sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL);
+	if (!sdev)
+		return -ENOMEM;
+
+	sdev->sysdev.id = -1;
+	sdev->sysdev.cls = &alchemy_dbdma_sysdev_class;
+	ret = sysdev_register(&sdev->sysdev);
+	if (ret)
+		kfree(sdev);
+
+	return ret;
 }
-#endif	/* CONFIG_PM */
 
 static int __init au1xxx_dbdma_init(void)
 {
@@ -1046,6 +1084,11 @@ static int __init au1xxx_dbdma_init(void)
 	else {
 		dbdma_initialized = 1;
 		printk(KERN_INFO "Alchemy DBDMA initialized\n");
+		ret = alchemy_dbdma_sysdev_init();
+		if (ret) {
+			printk(KERN_ERR "DBDMA PM init failed\n");
+			ret = 0;
+		}
 	}
 
 	return ret;

arch/mips/alchemy/common/irq.c

@@ -29,6 +29,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/sysdev.h>
 
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
@@ -216,90 +218,6 @@ struct au1xxx_irqmap au1200_irqmap[] __initdata = {
 };
 
 
-#ifdef CONFIG_PM
-
-/*
- * Save/restore the interrupt controller state.
- * Called from the save/restore core registers as part of the
- * au_sleep function in power.c.....maybe I should just pm_register()
- * them instead?
- */
-static unsigned int	sleep_intctl_config0[2];
-static unsigned int	sleep_intctl_config1[2];
-static unsigned int	sleep_intctl_config2[2];
-static unsigned int	sleep_intctl_src[2];
-static unsigned int	sleep_intctl_assign[2];
-static unsigned int	sleep_intctl_wake[2];
-static unsigned int	sleep_intctl_mask[2];
-
-void save_au1xxx_intctl(void)
-{
-	sleep_intctl_config0[0] = au_readl(IC0_CFG0RD);
-	sleep_intctl_config1[0] = au_readl(IC0_CFG1RD);
-	sleep_intctl_config2[0] = au_readl(IC0_CFG2RD);
-	sleep_intctl_src[0] = au_readl(IC0_SRCRD);
-	sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD);
-	sleep_intctl_wake[0] = au_readl(IC0_WAKERD);
-	sleep_intctl_mask[0] = au_readl(IC0_MASKRD);
-
-	sleep_intctl_config0[1] = au_readl(IC1_CFG0RD);
-	sleep_intctl_config1[1] = au_readl(IC1_CFG1RD);
-	sleep_intctl_config2[1] = au_readl(IC1_CFG2RD);
-	sleep_intctl_src[1] = au_readl(IC1_SRCRD);
-	sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD);
-	sleep_intctl_wake[1] = au_readl(IC1_WAKERD);
-	sleep_intctl_mask[1] = au_readl(IC1_MASKRD);
-}
-
-/*
- * For most restore operations, we clear the entire register and
- * then set the bits we found during the save.
- */
-void restore_au1xxx_intctl(void)
-{
-	au_writel(0xffffffff, IC0_MASKCLR); au_sync();
-
-	au_writel(0xffffffff, IC0_CFG0CLR); au_sync();
-	au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync();
-	au_writel(0xffffffff, IC0_CFG1CLR); au_sync();
-	au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync();
-	au_writel(0xffffffff, IC0_CFG2CLR); au_sync();
-	au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync();
-	au_writel(0xffffffff, IC0_SRCCLR); au_sync();
-	au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync();
-	au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync();
-	au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync();
-	au_writel(0xffffffff, IC0_WAKECLR); au_sync();
-	au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync();
-	au_writel(0xffffffff, IC0_RISINGCLR); au_sync();
-	au_writel(0xffffffff, IC0_FALLINGCLR); au_sync();
-	au_writel(0x00000000, IC0_TESTBIT); au_sync();
-
-	au_writel(0xffffffff, IC1_MASKCLR); au_sync();
-
-	au_writel(0xffffffff, IC1_CFG0CLR); au_sync();
-	au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync();
-	au_writel(0xffffffff, IC1_CFG1CLR); au_sync();
-	au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync();
-	au_writel(0xffffffff, IC1_CFG2CLR); au_sync();
-	au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync();
-	au_writel(0xffffffff, IC1_SRCCLR); au_sync();
-	au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync();
-	au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync();
-	au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync();
-	au_writel(0xffffffff, IC1_WAKECLR); au_sync();
-	au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync();
-	au_writel(0xffffffff, IC1_RISINGCLR); au_sync();
-	au_writel(0xffffffff, IC1_FALLINGCLR); au_sync();
-	au_writel(0x00000000, IC1_TESTBIT); au_sync();
-
-	au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync();
-
-	au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();
-}
-#endif /* CONFIG_PM */
-
-
 static void au1x_ic0_unmask(unsigned int irq_nr)
 {
 	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
@@ -635,3 +553,91 @@ void __init arch_init_irq(void)
 		break;
 	}
 }
+
+struct alchemy_ic_sysdev {
+	struct sys_device sysdev;
+	void __iomem *base;
+	unsigned long pmdata[7];
+};
+
+static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state)
+{
+	struct alchemy_ic_sysdev *icdev =
+			container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+	icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD);
+	icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD);
+	icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD);
+	icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD);
+	icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD);
+	icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD);
+	icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD);
+
+	return 0;
+}
+
+static int alchemy_ic_resume(struct sys_device *dev)
+{
+	struct alchemy_ic_sysdev *icdev =
+			container_of(dev, struct alchemy_ic_sysdev, sysdev);
+
+	__raw_writel(0xffffffff, icdev->base + IC_MASKCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG0CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG1CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_CFG2CLR);
+	__raw_writel(0xffffffff, icdev->base + IC_SRCCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_WAKECLR);
+	__raw_writel(0xffffffff, icdev->base + IC_RISINGCLR);
+	__raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR);
+	__raw_writel(0x00000000, icdev->base + IC_TESTBIT);
+	wmb();
+	__raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET);
+	__raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET);
+	__raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET);
+	__raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET);
+	__raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET);
+	__raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET);
+	wmb();
+
+	__raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET);
+	wmb();
+
+	return 0;
+}
+
+static struct sysdev_class alchemy_ic_sysdev_class = {
+	.name		= "ic",
+	.suspend	= alchemy_ic_suspend,
+	.resume		= alchemy_ic_resume,
+};
+
+static int __init alchemy_ic_sysdev_init(void)
+{
+	struct alchemy_ic_sysdev *icdev;
+	unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR };
+	int err, i;
+
+	err = sysdev_class_register(&alchemy_ic_sysdev_class);
+	if (err)
+		return err;
+
+	for (i = 0; i < 2; i++) {
+		icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL);
+		if (!icdev)
+			return -ENOMEM;
+
+		icdev->base = ioremap(icbase[i], 0x1000);
+
+		icdev->sysdev.id = i;
+		icdev->sysdev.cls = &alchemy_ic_sysdev_class;
+		err = sysdev_register(&icdev->sysdev);
+		if (err) {
+			kfree(icdev);
+			return err;
+		}
+	}
+
+	return 0;
+}
+device_initcall(alchemy_ic_sysdev_init);

arch/mips/alchemy/common/power.c

@@ -36,9 +36,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#include <asm/mach-au1x00/au1xxx_dbdma.h>
-#endif
 
 #ifdef CONFIG_PM
 
@@ -106,9 +103,6 @@ static void save_core_regs(void)
 	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
 #endif
 
-	/* Save interrupt controller state. */
-	save_au1xxx_intctl();
-
 	/* Clocks and PLLs. */
 	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
 	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
@@ -132,10 +126,6 @@ static void save_core_regs(void)
 	sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
 	sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
 	sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-	au1xxx_dbdma_suspend();
-#endif
 }
 
 static void restore_core_regs(void)
@@ -199,12 +189,6 @@ static void restore_core_regs(void)
 		au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync();
 		au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync();
 	}
-
-	restore_au1xxx_intctl();
-
-#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-	au1xxx_dbdma_resume();
-#endif
 }
 
 void au_sleep(void)

arch/mips/alchemy/devboards/pb1000/board_setup.c

@@ -27,8 +27,10 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1000.h>
+#include <asm/reboot.h>
 #include <prom.h>
 
 #include "../platform.h"
@@ -38,8 +40,16 @@ const char *get_system_type(void)
 	return "Alchemy Pb1000";
 }
 
-void board_reset(void)
+static void board_reset(char *c)
 {
+	asm volatile ("jr %0" : : "r" (0xbfc00000));
+}
+
+static void board_power_off(void)
+{
+	printk(KERN_ALERT "It's now safe to remove power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips1");
 }
 
 void __init board_setup(void)
@@ -177,6 +187,10 @@ void __init board_setup(void)
 		au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
 		break;
 	}
+
+	pm_power_off = board_power_off;
+	_machine_halt = board_power_off;
+	_machine_restart = board_reset;
 }
 
 static int __init pb1000_init_irq(void)

arch/mips/alchemy/devboards/pb1100/board_setup.c

@@ -39,11 +39,6 @@ const char *get_system_type(void)
 	return "Alchemy Pb1100";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;

arch/mips/alchemy/devboards/pb1200/board_setup.c

@@ -48,12 +48,6 @@ const char *get_system_type(void)
 	return "Alchemy Pb1200";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_RESETS, 0);
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");

arch/mips/alchemy/devboards/pb1500/board_setup.c

@@ -45,11 +45,6 @@ const char *get_system_type(void)
 	return "Alchemy Pb1500";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	u32 pin_func;

arch/mips/alchemy/devboards/pb1550/board_setup.c

@@ -48,11 +48,6 @@ const char *get_system_type(void)
 	return "Alchemy Pb1550";
 }
 
-void board_reset(void)
-{
-	bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
 	u32 pin_func;

arch/mips/ar7/platform.c

@@ -576,7 +576,6 @@ static int __init ar7_register_devices(void)
 {
 	void __iomem *bootcr;
 	u32 val;
-	u16 chip_id;
 	int res;
 
 	res = ar7_register_uarts();
@@ -635,18 +634,10 @@ static int __init ar7_register_devices(void)
 	val = readl(bootcr);
 	iounmap(bootcr);
 	if (val & AR7_WDT_HW_ENA) {
-		chip_id = ar7_chip_id();
-		switch (chip_id) {
-		case AR7_CHIP_7100:
-		case AR7_CHIP_7200:
-			ar7_wdt_res.start = AR7_REGS_WDT;
-			break;
-		case AR7_CHIP_7300:
+		if (ar7_has_high_vlynq())
 			ar7_wdt_res.start = UR8_REGS_WDT;
-			break;
-		default:
-			break;
-		}
+		else
+			ar7_wdt_res.start = AR7_REGS_WDT;
 
 		ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
 		res = platform_device_register(&ar7_wdt);
@@ -656,4 +647,4 @@ static int __init ar7_register_devices(void)
 
 	return 0;
 }
-arch_initcall(ar7_register_devices);
+device_initcall(ar7_register_devices);

arch/mips/bcm63xx/gpio.c

@@ -91,7 +91,7 @@ static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
 
 	spin_lock_irqsave(&bcm63xx_gpio_lock, flags);
 	tmp = bcm_gpio_readl(reg);
-	if (dir == GPIO_DIR_IN)
+	if (dir == BCM63XX_GPIO_DIR_IN)
 		tmp &= ~mask;
 	else
 		tmp |= mask;
@@ -103,14 +103,14 @@ static int bcm63xx_gpio_set_direction(struct gpio_chip *chip,
 
 static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
-	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN);
+	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_IN);
 }
 
 static int bcm63xx_gpio_direction_output(struct gpio_chip *chip,
 					 unsigned gpio, int value)
 {
 	bcm63xx_gpio_set(chip, gpio, value);
-	return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT);
+	return bcm63xx_gpio_set_direction(chip, gpio, BCM63XX_GPIO_DIR_OUT);
 }
 
 

arch/mips/cavium-octeon/serial.c

@@ -65,7 +65,11 @@ static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
 	p->type = PORT_OCTEON;
 	p->iotype = UPIO_MEM;
 	p->regshift = 3;	/* I/O addresses are every 8 bytes */
-	p->uartclk = mips_hpt_frequency;
+	if (octeon_is_simulation())
+		/* Make simulator output fast*/
+		p->uartclk = 115200 * 16;
+	else
+		p->uartclk = mips_hpt_frequency;
 	p->serial_in = octeon_serial_in;
 	p->serial_out = octeon_serial_out;
 }

arch/mips/cavium-octeon/setup.c

@@ -403,7 +403,6 @@ void __init prom_init(void)
 	const int coreid = cvmx_get_core_num();
 	int i;
 	int argc;
-	struct uart_port octeon_port;
 #ifdef CONFIG_CAVIUM_RESERVE32
 	int64_t addr = -1;
 #endif
@@ -610,30 +609,6 @@ void __init prom_init(void)
 	_machine_restart = octeon_restart;
 	_machine_halt = octeon_halt;
 
-	memset(&octeon_port, 0, sizeof(octeon_port));
-	/*
-	 * For early_serial_setup we don't set the port type or
-	 * UPF_FIXED_TYPE.
-	 */
-	octeon_port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ;
-	octeon_port.iotype = UPIO_MEM;
-	/* I/O addresses are every 8 bytes */
-	octeon_port.regshift = 3;
-	/* Clock rate of the chip */
-	octeon_port.uartclk = mips_hpt_frequency;
-	octeon_port.fifosize = 64;
-	octeon_port.mapbase = 0x0001180000000800ull + (1024 * octeon_uart);
-	octeon_port.membase = cvmx_phys_to_ptr(octeon_port.mapbase);
-	octeon_port.serial_in = octeon_serial_in;
-	octeon_port.serial_out = octeon_serial_out;
-#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
-	octeon_port.line = 0;
-#else
-	octeon_port.line = octeon_uart;
-#endif
-	octeon_port.irq = 42 + octeon_uart;
-	early_serial_setup(&octeon_port);
-
 	octeon_user_io_init();
 	register_smp_ops(&octeon_smp_ops);
 }
@@ -727,7 +702,7 @@ int prom_putchar(char c)
 	} while ((lsrval & 0x20) == 0);
 
 	/* Write the byte */
-	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c);
+	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c & 0xffull);
 	return 1;
 }
 

arch/mips/configs/ar7_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Wed Jun 24 14:08:59 2009
+# Linux kernel version: 2.6.34-rc6
+# Sat May  1 11:35:01 2010
 #
 CONFIG_MIPS=y
 
@@ -11,11 +11,12 @@ CONFIG_MIPS=y
 # CONFIG_MACH_ALCHEMY is not set
 CONFIG_AR7=y
 # CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_NEC_MARKEINS is not set
@@ -26,6 +27,7 @@ CONFIG_AR7=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP28 is not set
@@ -46,6 +48,7 @@ CONFIG_AR7=y
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_LOONGSON_UART_BASE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -63,10 +66,8 @@ CONFIG_CEVT_R4K=y
 CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_GPIO=y
 # CONFIG_CPU_BIG_ENDIAN is not set
@@ -81,7 +82,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
 # CONFIG_CPU_MIPS64_R1 is not set
@@ -103,6 +105,8 @@ CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
 # CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPSR1=y
@@ -124,6 +128,7 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -141,8 +146,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
@@ -165,6 +169,7 @@ CONFIG_KEXEC=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -174,6 +179,14 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -186,14 +199,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
 # CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -204,6 +215,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -225,19 +237,22 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
@@ -248,7 +263,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -256,14 +271,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -293,7 +335,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -377,6 +418,7 @@ CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 # CONFIG_NETFILTER_XT_TARGET_HL is not set
 # CONFIG_NETFILTER_XT_TARGET_LED is not set
@@ -458,6 +500,7 @@ CONFIG_IP_NF_RAW=m
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 CONFIG_ATM=m
 # CONFIG_ATM_CLIP is not set
@@ -466,6 +509,7 @@ CONFIG_ATM_BR2684=m
 CONFIG_ATM_BR2684_IPFILTER=y
 CONFIG_STP=y
 CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
 # CONFIG_NET_DSA is not set
 CONFIG_VLAN_8021Q=y
 # CONFIG_VLAN_8021Q_GVRP is not set
@@ -541,20 +585,19 @@ CONFIG_HAMRADIO=y
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
 CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
 # CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 CONFIG_MAC80211=m
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_MINSTREL=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
@@ -576,6 +619,7 @@ CONFIG_MAC80211_RC_DEFAULT="pid"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -585,9 +629,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -636,6 +680,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -668,6 +713,10 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -687,6 +736,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -727,6 +777,7 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -737,23 +788,21 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_CPMAC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+CONFIG_WLAN=y
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_HOSTAP is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -813,6 +862,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
@@ -824,11 +874,39 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_IT8761E is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -842,13 +920,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSB_DEBUG is not set
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_DRIVER_EXTIF=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -882,15 +954,18 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
@@ -921,6 +996,7 @@ CONFIG_VLYNQ=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -984,6 +1060,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_EMBEDDED is not set
@@ -996,11 +1073,11 @@ CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1039,21 +1116,29 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 # CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_SPINLOCK_TEST is not set
 
 #
 # Security options
@@ -1061,13 +1146,16 @@ CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD2=m
@@ -1108,11 +1196,13 @@ CONFIG_CRYPTO_ECB=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -190,8 +190,6 @@ extern unsigned long au1xxx_calc_clock(void);
 /* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
 void au1xxx_save_and_sleep(void);
 void au_sleep(void);
-void save_au1xxx_intctl(void);
-void restore_au1xxx_intctl(void);
 
 
 /* SOC Interrupt numbers */
@@ -835,6 +833,38 @@ enum soc_au1200_ints {
 #define MEM_STNAND_DATA 	0x20
 #endif
 
+
+/* Interrupt Controller register offsets */
+#define IC_CFG0RD		0x40
+#define IC_CFG0SET		0x40
+#define IC_CFG0CLR		0x44
+#define IC_CFG1RD		0x48
+#define IC_CFG1SET		0x48
+#define IC_CFG1CLR		0x4C
+#define IC_CFG2RD		0x50
+#define IC_CFG2SET		0x50
+#define IC_CFG2CLR		0x54
+#define IC_REQ0INT		0x54
+#define IC_SRCRD		0x58
+#define IC_SRCSET		0x58
+#define IC_SRCCLR		0x5C
+#define IC_REQ1INT		0x5C
+#define IC_ASSIGNRD		0x60
+#define IC_ASSIGNSET		0x60
+#define IC_ASSIGNCLR		0x64
+#define IC_WAKERD		0x68
+#define IC_WAKESET		0x68
+#define IC_WAKECLR		0x6C
+#define IC_MASKRD		0x70
+#define IC_MASKSET		0x70
+#define IC_MASKCLR		0x74
+#define IC_RISINGRD		0x78
+#define IC_RISINGCLR		0x78
+#define IC_FALLINGRD		0x7C
+#define IC_FALLINGCLR		0x7C
+#define IC_TESTBIT		0x80
+
+
 /* Interrupt Controller 0 */
 #define IC0_CFG0RD		0xB0400040
 #define IC0_CFG0SET		0xB0400040

arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h

@@ -358,10 +358,6 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
 u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
 extern void au1xxx_ddma_del_device(u32 devid);
 void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
-#ifdef CONFIG_PM
-void au1xxx_dbdma_suspend(void);
-void au1xxx_dbdma_resume(void);
-#endif
 
 /*
  *	Flags for the put_source/put_dest functions.

arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h

@@ -20,7 +20,7 @@ static inline unsigned long bcm63xx_gpio_count(void)
 	}
 }
 
-#define GPIO_DIR_OUT	0x0
-#define GPIO_DIR_IN	0x1
+#define BCM63XX_GPIO_DIR_OUT	0x0
+#define BCM63XX_GPIO_DIR_IN	0x1
 
 #endif /* !BCM63XX_GPIO_H */

arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h

@@ -52,6 +52,8 @@
 #define cpu_has_tx39_cache	0
 #define cpu_has_userlocal	0
 #define cpu_has_vce		0
+#define cpu_has_veic		0
+#define cpu_has_vint		0
 #define cpu_has_vtag_icache	0
 #define cpu_has_watch		1
 

arch/mips/include/asm/mach-loongson/gpio.h

+/*
+ * STLS2F GPIO Support
+ *
+ * Copyright (c) 2008  Richard Liu, STMicroelectronics <richard.liu@st.com>
+ * Copyright (c) 2008-2010  Arnaud Patard <apatard@mandriva.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__STLS2F_GPIO_H
+#define	__STLS2F_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+extern void gpio_set_value(unsigned gpio, int value);
+extern int gpio_get_value(unsigned gpio);
+extern int gpio_cansleep(unsigned gpio);
+
+/* The chip can do interrupt
+ * but it has not been tested and doc not clear
+ */
+static inline int gpio_to_irq(int gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+	return -EINVAL;
+}
+
+#endif				/* __STLS2F_GPIO_H */

arch/mips/include/asm/processor.h

@@ -344,16 +344,10 @@ unsigned long get_wchan(struct task_struct *p);
 #ifdef CONFIG_CPU_HAS_PREFETCH
 
 #define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch((x), 0, 1)
 
-static inline void prefetch(const void *addr)
-{
-	__asm__ __volatile__(
-	"	.set	mips4		\n"
-	"	pref	%0, (%1)	\n"
-	"	.set	mips0		\n"
-	:
-	: "i" (Pref_Load), "r" (addr));
-}
+#define ARCH_HAS_PREFETCHW
+#define prefetchw(x) __builtin_prefetch((x), 1, 1)
 
 #endif
 

arch/mips/kernel/cpu-probe.c

@@ -125,6 +125,30 @@ static int __init wait_disable(char *s)
 
 __setup("nowait", wait_disable);
 
+static int __cpuinitdata mips_fpu_disabled;
+
+static int __init fpu_disable(char *s)
+{
+	cpu_data[0].options &= ~MIPS_CPU_FPU;
+	mips_fpu_disabled = 1;
+
+	return 1;
+}
+
+__setup("nofpu", fpu_disable);
+
+int __cpuinitdata mips_dsp_disabled;
+
+static int __init dsp_disable(char *s)
+{
+	cpu_data[0].ases &= ~MIPS_ASE_DSP;
+	mips_dsp_disabled = 1;
+
+	return 1;
+}
+
+__setup("nodsp", dsp_disable);
+
 void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -982,6 +1006,12 @@ __cpuinit void cpu_probe(void)
 	 */
 	BUG_ON(current_cpu_type() != c->cputype);
 
+	if (mips_fpu_disabled)
+		c->options &= ~MIPS_CPU_FPU;
+
+	if (mips_dsp_disabled)
+		c->ases &= ~MIPS_ASE_DSP;
+
 	if (c->options & MIPS_CPU_FPU) {
 		c->fpu_id = cpu_get_fpu_id();
 

arch/mips/kernel/cpufreq/loongson2_cpufreq.c

@@ -65,7 +65,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 		return -ENODEV;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, cpumask_of(cpu));
 
 	if (cpufreq_frequency_table_target
 	    (policy, &loongson2_clockmod_table[0], target_freq, relation,
@@ -91,7 +91,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 	/* notifiers */
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	/* setting the cpu frequency */
 	clk_set_rate(cpuclk, freq);

arch/mips/kernel/mips-mt-fpaff.c

@@ -100,10 +100,10 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
 	if (test_ti_thread_flag(ti, TIF_FPUBOUND) &&
 	    cpus_intersects(new_mask, mt_fpu_cpumask)) {
 		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
-		retval = set_cpus_allowed(p, effective_mask);
+		retval = set_cpus_allowed_ptr(p, &effective_mask);
 	} else {
 		clear_ti_thread_flag(ti, TIF_FPUBOUND);
-		retval = set_cpus_allowed(p, new_mask);
+		retval = set_cpus_allowed_ptr(p, &new_mask);
 	}
 
 out_unlock:

arch/mips/kernel/setup.c

@@ -569,27 +569,6 @@ void __init setup_arch(char **cmdline_p)
 	plat_smp_setup();
 }
 
-static int __init fpu_disable(char *s)
-{
-	int i;
-
-	for (i = 0; i < NR_CPUS; i++)
-		cpu_data[i].options &= ~MIPS_CPU_FPU;
-
-	return 1;
-}
-
-__setup("nofpu", fpu_disable);
-
-static int __init dsp_disable(char *s)
-{
-	cpu_data[0].ases &= ~MIPS_ASE_DSP;
-
-	return 1;
-}
-
-__setup("nodsp", dsp_disable);
-
 unsigned long kernelsp[NR_CPUS];
 unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
 

arch/mips/kernel/traps.c

@@ -867,7 +867,7 @@ static void mt_ase_fp_affinity(void)
 				= current->cpus_allowed;
 			cpus_and(tmask, current->cpus_allowed,
 				mt_fpu_cpumask);
-			set_cpus_allowed(current, tmask);
+			set_cpus_allowed_ptr(current, &tmask);
 			set_thread_flag(TIF_FPUBOUND);
 		}
 	}

arch/mips/loongson/common/Makefile

@@ -4,6 +4,7 @@
 
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     pci.o bonito-irq.o mem.o machtype.o platform.o
+obj-$(CONFIG_GENERIC_GPIO) += gpio.o
 
 #
 # Serial port support

arch/mips/loongson/common/gpio.c

+/*
+ *  STLS2F GPIO Support
+ *
+ *  Copyright (c) 2008 Richard Liu,  STMicroelectronics  <richard.liu@st.com>
+ *  Copyright (c) 2008-2010 Arnaud Patard <apatard@mandriva.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <asm/types.h>
+#include <loongson.h>
+#include <linux/gpio.h>
+
+#define STLS2F_N_GPIO		4
+#define STLS2F_GPIO_IN_OFFSET	16
+
+static DEFINE_SPINLOCK(gpio_lock);
+
+int gpio_get_value(unsigned gpio)
+{
+	u32 val;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return __gpio_get_value(gpio);
+
+	mask = 1 << (gpio + STLS2F_GPIO_IN_OFFSET);
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	spin_unlock(&gpio_lock);
+
+	return ((val & mask) != 0);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+void gpio_set_value(unsigned gpio, int state)
+{
+	u32 val;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO) {
+		__gpio_set_value(gpio, state);
+		return ;
+	}
+
+	mask = 1 << gpio;
+
+	spin_lock(&gpio_lock);
+	val = LOONGSON_GPIODATA;
+	if (state)
+		val |= mask;
+	else
+		val &= (~mask);
+	LOONGSON_GPIODATA = val;
+	spin_unlock(&gpio_lock);
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+int gpio_cansleep(unsigned gpio)
+{
+	if (gpio < STLS2F_N_GPIO)
+		return 0;
+	else
+		return __gpio_cansleep(gpio);
+}
+EXPORT_SYMBOL(gpio_cansleep);
+
+static int ls2f_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	u32 temp;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return -EINVAL;
+
+	spin_lock(&gpio_lock);
+	mask = 1 << gpio;
+	temp = LOONGSON_GPIOIE;
+	temp |= mask;
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int ls2f_gpio_direction_output(struct gpio_chip *chip,
+		unsigned gpio, int level)
+{
+	u32 temp;
+	u32 mask;
+
+	if (gpio >= STLS2F_N_GPIO)
+		return -EINVAL;
+
+	gpio_set_value(gpio, level);
+	spin_lock(&gpio_lock);
+	mask = 1 << gpio;
+	temp = LOONGSON_GPIOIE;
+	temp &= (~mask);
+	LOONGSON_GPIOIE = temp;
+	spin_unlock(&gpio_lock);
+
+	return 0;
+}
+
+static int ls2f_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	return gpio_get_value(gpio);
+}
+
+static void ls2f_gpio_set_value(struct gpio_chip *chip,
+		unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+}
+
+static struct gpio_chip ls2f_chip = {
+	.label                  = "ls2f",
+	.direction_input        = ls2f_gpio_direction_input,
+	.get                    = ls2f_gpio_get_value,
+	.direction_output       = ls2f_gpio_direction_output,
+	.set                    = ls2f_gpio_set_value,
+	.base                   = 0,
+	.ngpio                  = STLS2F_N_GPIO,
+};
+
+static int __init ls2f_gpio_setup(void)
+{
+	return gpiochip_add(&ls2f_chip);
+}
+arch_initcall(ls2f_gpio_setup);

arch/mips/math-emu/cp1emu.c

@@ -354,7 +354,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 			if (MIPSInst_RD(ir) == FPCREG_CSR) {
 				value = ctx->fcr31;
-				value = (value & ~0x3) | mips_rm[value & 0x3];
+				value = (value & ~FPU_CSR_RM) |
+					mips_rm[modeindex(value)];
 #ifdef CSRTRACE
 				printk("%p gpr[%d]<-csr=%08x\n",
 					(void *) (xcp->cp0_epc),
@@ -907,7 +908,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.w = ieee754sp_tint(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = w_fmt;
@@ -933,7 +934,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754sp fs;
 
 			SPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.l = ieee754sp_tlong(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = l_fmt;
@@ -1081,7 +1082,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754dp fs;
 
 			DPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.w = ieee754dp_tint(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = w_fmt;
@@ -1107,7 +1108,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			ieee754dp fs;
 
 			DPFROMREG(fs, MIPSInst_FS(ir));
-			ieee754_csr.rm = ieee_rm[MIPSInst_FUNC(ir) & 0x3];
+			ieee754_csr.rm = ieee_rm[modeindex(MIPSInst_FUNC(ir))];
 			rv.l = ieee754dp_tlong(fs);
 			ieee754_csr.rm = oldrm;
 			rfmt = l_fmt;

arch/mips/oprofile/op_model_loongson2.c

@@ -8,7 +8,6 @@
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
- *
  */
 #include <linux/init.h>
 #include <linux/oprofile.h>
@@ -17,24 +16,18 @@
 #include <loongson.h>			/* LOONGSON2_PERFCNT_IRQ */
 #include "op_impl.h"
 
-/*
- * a patch should be sent to oprofile with the loongson-specific support.
- * otherwise, the oprofile tool will not recognize this and complain about
- * "cpu_type 'unset' is not valid".
- */
 #define LOONGSON2_CPU_TYPE	"mips/loongson2"
 
-#define LOONGSON2_COUNTER1_EVENT(event)	((event & 0x0f) << 5)
-#define LOONGSON2_COUNTER2_EVENT(event)	((event & 0x0f) << 9)
-
-#define LOONGSON2_PERFCNT_EXL			(1UL	<<  0)
-#define LOONGSON2_PERFCNT_KERNEL		(1UL    <<  1)
-#define LOONGSON2_PERFCNT_SUPERVISOR	(1UL    <<  2)
-#define LOONGSON2_PERFCNT_USER			(1UL    <<  3)
-#define LOONGSON2_PERFCNT_INT_EN		(1UL    <<  4)
 #define LOONGSON2_PERFCNT_OVERFLOW		(1ULL   << 31)
 
-/* Loongson2 performance counter register */
+#define LOONGSON2_PERFCTRL_EXL			(1UL	<<  0)
+#define LOONGSON2_PERFCTRL_KERNEL		(1UL    <<  1)
+#define LOONGSON2_PERFCTRL_SUPERVISOR		(1UL    <<  2)
+#define LOONGSON2_PERFCTRL_USER			(1UL    <<  3)
+#define LOONGSON2_PERFCTRL_ENABLE		(1UL    <<  4)
+#define LOONGSON2_PERFCTRL_EVENT(idx, event) \
+	(((event) & 0x0f) << ((idx) ? 9 : 5))
+
 #define read_c0_perfctrl() __read_64bit_c0_register($24, 0)
 #define write_c0_perfctrl(val) __write_64bit_c0_register($24, 0, val)
 #define read_c0_perfcnt() __read_64bit_c0_register($25, 0)
@@ -49,7 +42,6 @@ static struct loongson2_register_config {
 
 static char *oprofid = "LoongsonPerf";
 static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id);
-/* Compute all of the registers in preparation for enabling profiling.  */
 
 static void loongson2_reg_setup(struct op_counter_config *cfg)
 {
@@ -57,41 +49,38 @@ static void loongson2_reg_setup(struct op_counter_config *cfg)
 
 	reg.reset_counter1 = 0;
 	reg.reset_counter2 = 0;
-	/* Compute the performance counter ctrl word.  */
-	/* For now count kernel and user mode */
+
+	/*
+	 * Compute the performance counter ctrl word.
+	 * For now, count kernel and user mode.
+	 */
 	if (cfg[0].enabled) {
-		ctrl |= LOONGSON2_COUNTER1_EVENT(cfg[0].event);
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(0, cfg[0].event);
 		reg.reset_counter1 = 0x80000000ULL - cfg[0].count;
 	}
 
 	if (cfg[1].enabled) {
-		ctrl |= LOONGSON2_COUNTER2_EVENT(cfg[1].event);
-		reg.reset_counter2 = (0x80000000ULL - cfg[1].count);
+		ctrl |= LOONGSON2_PERFCTRL_EVENT(1, cfg[1].event);
+		reg.reset_counter2 = 0x80000000ULL - cfg[1].count;
 	}
 
 	if (cfg[0].enabled || cfg[1].enabled) {
-		ctrl |= LOONGSON2_PERFCNT_EXL | LOONGSON2_PERFCNT_INT_EN;
+		ctrl |= LOONGSON2_PERFCTRL_EXL | LOONGSON2_PERFCTRL_ENABLE;
 		if (cfg[0].kernel || cfg[1].kernel)
-			ctrl |= LOONGSON2_PERFCNT_KERNEL;
+			ctrl |= LOONGSON2_PERFCTRL_KERNEL;
 		if (cfg[0].user || cfg[1].user)
-			ctrl |= LOONGSON2_PERFCNT_USER;
+			ctrl |= LOONGSON2_PERFCTRL_USER;
 	}
 
 	reg.ctrl = ctrl;
 
 	reg.cnt1_enabled = cfg[0].enabled;
 	reg.cnt2_enabled = cfg[1].enabled;
-
 }
 
-/* Program all of the registers in preparation for enabling profiling.  */
-
 static void loongson2_cpu_setup(void *args)
 {
-	uint64_t perfcount;
-
-	perfcount = (reg.reset_counter2 << 32) | reg.reset_counter1;
-	write_c0_perfcnt(perfcount);
+	write_c0_perfcnt((reg.reset_counter2 << 32) | reg.reset_counter1);
 }
 
 static void loongson2_cpu_start(void *args)
@@ -114,15 +103,8 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
 	struct pt_regs *regs = get_irq_regs();
 	int enabled;
 
-	/*
-	 * LOONGSON2 defines two 32-bit performance counters.
-	 * To avoid a race updating the registers we need to stop the counters
-	 * while we're messing with
-	 * them ...
-	 */
-
 	/* Check whether the irq belongs to me */
-	enabled = read_c0_perfctrl() & LOONGSON2_PERFCNT_INT_EN;
+	enabled = read_c0_perfctrl() & LOONGSON2_PERFCTRL_ENABLE;
 	if (!enabled)
 		return IRQ_NONE;
 	enabled = reg.cnt1_enabled | reg.cnt2_enabled;

arch/mips/powertv/asic/prealloc.h

+/*
+ * Definitions for memory preallocations
+ *
+ * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
+#define _ARCH_MIPS_POWERTV_ASIC_PREALLOC_H
+
+#define KIBIBYTE(n) ((n) * 1024)    /* Number of kibibytes */
+#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
+
+/* "struct resource" array element definition */
+#define PREALLOC(NAME, START, END, FLAGS) {	\
+		.name = (NAME),			\
+		.start = (START),		\
+		.end = (END),			\
+		.flags = (FLAGS)		\
+	},
+
+/* Individual resources in the preallocated resource arrays are defined using
+ *  macros.  These macros are conditionally defined based on their
+ *  corresponding kernel configuration flag:
+ *    - CONFIG_PREALLOC_NORMAL: preallocate resources for a normal settop box
+ *    - CONFIG_PREALLOC_TFTP: preallocate the TFTP download resource
+ *    - CONFIG_PREALLOC_DOCSIS: preallocate the DOCSIS resource
+ *    - CONFIG_PREALLOC_PMEM: reserve space for persistent memory
+ */
+#ifdef CONFIG_PREALLOC_NORMAL
+#define PREALLOC_NORMAL(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_NORMAL(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_TFTP
+#define PREALLOC_TFTP(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_TFTP(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_DOCSIS
+#define PREALLOC_DOCSIS(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_DOCSIS(name, start, end, flags)
+#endif
+
+#ifdef CONFIG_PREALLOC_PMEM
+#define PREALLOC_PMEM(name, start, end, flags) \
+   PREALLOC(name, start, end, flags)
+#else
+#define PREALLOC_PMEM(name, start, end, flags)
+#endif
+#endif

drivers/rtc/rtc-cmos.c

@@ -238,31 +238,32 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	rtc_control = CMOS_READ(RTC_CONTROL);
 	spin_unlock_irq(&rtc_lock);
 
-	/* REVISIT this assumes PC style usage:  always BCD */
-
-	if (((unsigned)t->time.tm_sec) < 0x60)
-		t->time.tm_sec = bcd2bin(t->time.tm_sec);
-	else
-		t->time.tm_sec = -1;
-	if (((unsigned)t->time.tm_min) < 0x60)
-		t->time.tm_min = bcd2bin(t->time.tm_min);
-	else
-		t->time.tm_min = -1;
-	if (((unsigned)t->time.tm_hour) < 0x24)
-		t->time.tm_hour = bcd2bin(t->time.tm_hour);
-	else
-		t->time.tm_hour = -1;
-
-	if (cmos->day_alrm) {
-		if (((unsigned)t->time.tm_mday) <= 0x31)
-			t->time.tm_mday = bcd2bin(t->time.tm_mday);
+	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		if (((unsigned)t->time.tm_sec) < 0x60)
+			t->time.tm_sec = bcd2bin(t->time.tm_sec);
 		else
-			t->time.tm_mday = -1;
-		if (cmos->mon_alrm) {
-			if (((unsigned)t->time.tm_mon) <= 0x12)
-				t->time.tm_mon = bcd2bin(t->time.tm_mon) - 1;
+			t->time.tm_sec = -1;
+		if (((unsigned)t->time.tm_min) < 0x60)
+			t->time.tm_min = bcd2bin(t->time.tm_min);
+		else
+			t->time.tm_min = -1;
+		if (((unsigned)t->time.tm_hour) < 0x24)
+			t->time.tm_hour = bcd2bin(t->time.tm_hour);
+		else
+			t->time.tm_hour = -1;
+
+		if (cmos->day_alrm) {
+			if (((unsigned)t->time.tm_mday) <= 0x31)
+				t->time.tm_mday = bcd2bin(t->time.tm_mday);
 			else
-				t->time.tm_mon = -1;
+				t->time.tm_mday = -1;
+
+			if (cmos->mon_alrm) {
+				if (((unsigned)t->time.tm_mon) <= 0x12)
+					t->time.tm_mon = bcd2bin(t->time.tm_mon)-1;
+				else
+					t->time.tm_mon = -1;
+			}
 		}
 	}
 	t->time.tm_year = -1;
@@ -322,29 +323,26 @@ static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
 static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-	unsigned char	mon, mday, hrs, min, sec;
+       unsigned char   mon, mday, hrs, min, sec, rtc_control;
 
 	if (!is_valid_irq(cmos->irq))
 		return -EIO;
 
-	/* REVISIT this assumes PC style usage:  always BCD */
-
-	/* Writing 0xff means "don't care" or "match all".  */
-
 	mon = t->time.tm_mon + 1;
-	mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
-
 	mday = t->time.tm_mday;
-	mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
-
 	hrs = t->time.tm_hour;
-	hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
-
 	min = t->time.tm_min;
-	min = (min < 60) ? bin2bcd(min) : 0xff;
-
 	sec = t->time.tm_sec;
-	sec = (sec < 60) ? bin2bcd(sec) : 0xff;
+
+	rtc_control = CMOS_READ(RTC_CONTROL);
+	if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+		/* Writing 0xff means "don't care" or "match all".  */
+		mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
+		mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
+		hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
+		min = (min < 60) ? bin2bcd(min) : 0xff;
+		sec = (sec < 60) ? bin2bcd(sec) : 0xff;
+	}
 
 	spin_lock_irq(&rtc_lock);
 
@@ -478,7 +476,7 @@ static int cmos_procfs(struct device *dev, struct seq_file *seq)
 			"update_IRQ\t: %s\n"
 			"HPET_emulated\t: %s\n"
 			// "square_wave\t: %s\n"
-			// "BCD\t\t: %s\n"
+			"BCD\t\t: %s\n"
 			"DST_enable\t: %s\n"
 			"periodic_freq\t: %d\n"
 			"batt_status\t: %s\n",
@@ -486,7 +484,7 @@ static int cmos_procfs(struct device *dev, struct seq_file *seq)
 			(rtc_control & RTC_UIE) ? "yes" : "no",
 			is_hpet_enabled() ? "yes" : "no",
 			// (rtc_control & RTC_SQWE) ? "yes" : "no",
-			// (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
+			(rtc_control & RTC_DM_BINARY) ? "no" : "yes",
 			(rtc_control & RTC_DST_EN) ? "yes" : "no",
 			cmos->rtc->irq_freq,
 			(valid & RTC_VRT) ? "okay" : "dead");
@@ -751,12 +749,11 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
 
 	spin_unlock_irq(&rtc_lock);
 
-	/* FIXME teach the alarm code how to handle binary mode;
+	/* FIXME:
 	 * <asm-generic/rtc.h> doesn't know 12-hour mode either.
 	 */
-	if (is_valid_irq(rtc_irq) &&
-	    (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))) {
-		dev_dbg(dev, "only 24-hr BCD mode supported\n");
+       if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
+		dev_warn(dev, "only 24-hr supported\n");
 		retval = -ENXIO;
 		goto cleanup1;
 	}