提交 68ca2f68 编写于 作者: L Lars-Peter Clausen 提交者: Mark Brown

ASoC: wm8990: Replace w->codec snd_soc_dapm_to_codec(w->dapm)

The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 8b39dd9f
......@@ -374,13 +374,14 @@ SOC_SINGLE("RIN34 Mute Switch", WM8990_RIGHT_LINE_INPUT_3_4_VOLUME,
static int outmixer_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
u32 reg_shift = kcontrol->private_value & 0xfff;
int ret = 0;
u16 reg;
switch (reg_shift) {
case WM8990_SPEAKER_MIXER | (WM8990_LDSPK_BIT << 8) :
reg = snd_soc_read(w->codec, WM8990_OUTPUT_MIXER1);
reg = snd_soc_read(codec, WM8990_OUTPUT_MIXER1);
if (reg & WM8990_LDLO) {
printk(KERN_WARNING
"Cannot set as Output Mixer 1 LDLO Set\n");
......@@ -388,7 +389,7 @@ static int outmixer_event(struct snd_soc_dapm_widget *w,
}
break;
case WM8990_SPEAKER_MIXER | (WM8990_RDSPK_BIT << 8):
reg = snd_soc_read(w->codec, WM8990_OUTPUT_MIXER2);
reg = snd_soc_read(codec, WM8990_OUTPUT_MIXER2);
if (reg & WM8990_RDRO) {
printk(KERN_WARNING
"Cannot set as Output Mixer 2 RDRO Set\n");
......@@ -396,7 +397,7 @@ static int outmixer_event(struct snd_soc_dapm_widget *w,
}
break;
case WM8990_OUTPUT_MIXER1 | (WM8990_LDLO_BIT << 8):
reg = snd_soc_read(w->codec, WM8990_SPEAKER_MIXER);
reg = snd_soc_read(codec, WM8990_SPEAKER_MIXER);
if (reg & WM8990_LDSPK) {
printk(KERN_WARNING
"Cannot set as Speaker Mixer LDSPK Set\n");
......@@ -404,7 +405,7 @@ static int outmixer_event(struct snd_soc_dapm_widget *w,
}
break;
case WM8990_OUTPUT_MIXER2 | (WM8990_RDRO_BIT << 8):
reg = snd_soc_read(w->codec, WM8990_SPEAKER_MIXER);
reg = snd_soc_read(codec, WM8990_SPEAKER_MIXER);
if (reg & WM8990_RDSPK) {
printk(KERN_WARNING
"Cannot set as Speaker Mixer RDSPK Set\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册