Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 67ec962a 编写于 作者: E Erik Arfvidson 提交者： Greg Kroah-Hartman
浏览文件
操作

staging: unisys: remove unused #define in iochannel.h 

This patch simply remove all unused #define's in iochannel.h
Signed-off-by: NErik Arfvidson <erik.arfvidson@unisys.com>
Signed-off-by: NBenjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 79245bfc
隐藏空白更改
内联 并排
Showing with 0 addition and 137 deletion
drivers/staging/unisys/common-spar/include/channels/iochannel.h
浏览文件 @ 67ec962a
......@@ -86,41 +86,10 @@
* ioguestparts */
#define IOCHAN_TO_IOPART 0 /* used by ioguestpart to 'insert' signals to
* iopart */
#define IOCHAN_FROM_GUESTPART 0 /* used by iopart to 'remove' signals from
* ioguestpart - same queue as previous queue */
#define IOCHAN_TO_GUESTPART 1 /* used by iopart to 'insert' signals to
* ioguestpart */
#define IOCHAN_FROM_IOPART 1 /* used by ioguestpart to 'remove' signals from
* iopart - same queue as previous queue */
/* these define the two queues per control channel between controlpart and "its"
* guests, which includes the iopart */
#define CTRLCHAN_TO_CTRLGUESTPART 0 /* used by ctrlguestpart to 'insert' signals
* to ctrlpart */
#define CTLRCHAN_FROM_CTRLPART 0 /* used by ctrlpart to 'remove' signals from
* ctrlquestpart - same queue as previous
* queue */
#define CTRLCHAN_TO_CTRLPART 1 /* used by ctrlpart to 'insert' signals to
* ctrlguestpart */
#define CTRLCHAN_FROM_CTRLGUESTPART 1 /* used by ctrguestpart to 'remove'
* signals from ctrlpart - same queue as
* previous queue */
/* these define the Event & Ack queues per control channel Events are generated
* by CTRLGUESTPART and sent to CTRLPART; Acks are generated by CTRLPART and sent
* to CTRLGUESTPART. */
#define CTRLCHAN_EVENT_TO_CTRLPART 2 /* used by ctrlguestpart to 'insert' Events
* to ctrlpart */
#define CTRLCHAN_EVENT_FROM_CTRLGUESTPART 2 /* used by ctrlpart to 'remove'
* Events from ctrlguestpart */
#define CTRLCHAN_ACK_TO_CTRLGUESTPART 3 /* used by ctrlpart to 'insert' Acks to
* ctrlguestpart */
#define CTRLCHAN_ACK_FROM_CTRLPART 3 /* used by ctrlguestpart to 'remove' Events
* from ctrlpart */
/* size of cdb - i.e., scsi cmnd */
#define MAX_CMND_SIZE 16
......@@ -128,24 +97,6 @@
#define MAX_PHYS_INFO 64
/* Because GuestToGuestCopy is limited to 4KiB segments, and we have limited the
* Emulex Driver to 256 scatter list segments via the lpfc_sg_seg_cnt parameter
* to 256, the maximum I/O size is limited to 256 * 4 KiB = 1 MB */
#define MAX_IO_SIZE (1024*1024) /* 1 MB */
/* NOTE 1: lpfc defines its support for segments in
* #define LPFC_SG_SEG_CNT 64
*
* NOTE 2: In Linux, frags array in skb is currently allocated to be
* MAX_SKB_FRAGS size, which is 18 which is smaller than MAX_PHYS_INFO for
* now. */
#define MAX_SCSI_BUSES 1
#define MAX_SCSI_TARGETS 8
#define MAX_SCSI_LUNS 16
#define MAX_SCSI_FROM_HOST 0xFFFFFFFF /* Indicator to use Physical HBA
* SCSI Host value */
/* various types of network packets that can be sent in cmdrsp */
enum net_types {
NET_RCV_POST = 0, /* submit buffer to hold receiving
......@@ -178,19 +129,12 @@ enum net_types {
#define ETH_MIN_DATA_SIZE 46 /* minimum eth data size */
#define ETH_MIN_PACKET_SIZE (ETH_HEADER_SIZE + ETH_MIN_DATA_SIZE)
#define ETH_DEF_DATA_SIZE 1500 /* default data size */
#define ETH_DEF_PACKET_SIZE (ETH_HEADER_SIZE + ETH_DEF_DATA_SIZE)
#define ETH_MAX_MTU 16384 /* maximum data size */
#ifndef MAX_MACADDR_LEN
#define MAX_MACADDR_LEN 6 /* number of bytes in MAC address */
#endif /* MAX_MACADDR_LEN */
#define ETH_IS_LOCALLY_ADMINISTERED(address) \
(((u8 *)(address))[0] & ((u8)0x02))
#define NIC_VENDOR_ID 0x0008000B
/* various types of scsi task mgmt commands */
enum task_mgmt_types {
TASK_MGMT_ABORT_TASK = 1,
......@@ -205,20 +149,6 @@ enum vdisk_mgmt_types {
VDISK_MGMT_RELEASE,
};
/* this is used in the vdest field */
#define VDEST_ALL 0xFFFF
#define MIN_NUMSIGNALS 64
#define MAX_NUMSIGNALS 4096
/* MAX_NET_RCV_BUF specifies the number of rcv buffers that are created by each
* guest's virtnic and posted to uisnic. Uisnic, for each channel, keeps the rcv
* buffers posted and uses them to receive data on behalf of the guest's virtnic.
* NOTE: the num_rcv_bufs is configurable for each VNIC. So the following is
* simply an upperlimit on what each VNIC can provide. Setting it to half of the
* NUMSIGNALS to prevent queue full deadlocks */
#define MAX_NET_RCV_BUFS (MIN_NUMSIGNALS / 2)
/*
* structs with pragma pack */
......@@ -283,13 +213,7 @@ struct uiscmdrsp_scsi {
u8 scsistat; /* the scsi status */
u8 addlstat; /* non-scsi status - covers cases like timeout
* needed by windows guests */
#define ADDL_RESET 1
#define ADDL_TIMEOUT 2
#define ADDL_INTERNAL_ERROR 3
#define ADDL_SEL_TIMEOUT 4
#define ADDL_CMD_TIMEOUT 5
#define ADDL_BAD_TARGET 6
#define ADDL_RETRY 7
/* the following fields are need to determine the result of command */
u8 sensebuf[MAX_SENSE_SIZE]; /* sense info in case cmd failed; */
......@@ -320,7 +244,6 @@ struct uiscmdrsp_scsi {
*connected to this logical unit.
*/
#define DEV_NOT_PRESENT 0x7f /* old name - compatibility */
#define DEV_NOT_CAPABLE 0x7f /* peripheral qualifier of 0x3 */
/* peripheral type of 0x1f */
/* specifies no device but target present */
......@@ -329,10 +252,6 @@ struct uiscmdrsp_scsi {
/* peripheral type of 0 - disk */
/* specifies device capable, but not present */
#define DEV_PROC_CAPABLE_NOT_PRESENT 0x23 /* peripheral qualifier of 0x1 */
/* peripheral type of 3 - processor */
/* specifies device capable, but not present */
#define DEV_HISUPPORT 0x10 /* HiSup = 1; shows support for report luns */
/* must be returned for lun 0. */
......@@ -423,37 +342,6 @@ struct sense_data {
u8 sense_key_specific[3];
};
/* some SCSI ADSENSE codes */
#ifndef SCSI_ADSENSE_LUN_NOT_READY
#define SCSI_ADSENSE_LUN_NOT_READY 0x04
#endif /* */
#ifndef SCSI_ADSENSE_ILLEGAL_COMMAND
#define SCSI_ADSENSE_ILLEGAL_COMMAND 0x20
#endif /* */
#ifndef SCSI_ADSENSE_ILLEGAL_BLOCK
#endif /* */
#ifndef SCSI_ADSENSE_ILLEGAL_BLOCK
#define SCSI_ADSENSE_ILLEGAL_BLOCK 0x21
#endif /* */
#ifndef SCSI_ADSENSE_INVALID_CDB
#define SCSI_ADSENSE_INVALID_CDB 0x24
#endif /* */
#ifndef SCSI_ADSENSE_INVALID_LUN
#define SCSI_ADSENSE_INVALID_LUN 0x25
#endif /* */
#ifndef SCSI_ADWRITE_PROTECT
#define SCSI_ADWRITE_PROTECT 0x27
#endif /* */
#ifndef SCSI_ADSENSE_MEDIUM_CHANGED
#define SCSI_ADSENSE_MEDIUM_CHANGED 0x28
#endif /* */
#ifndef SCSI_ADSENSE_BUS_RESET
#define SCSI_ADSENSE_BUS_RESET 0x29
#endif /* */
#ifndef SCSI_ADSENSE_NO_MEDIA_IN_DEVICE
#define SCSI_ADSENSE_NO_MEDIA_IN_DEVICE 0x3a
#endif /* */
struct net_pkt_xmt {
int len; /* full length of data in the packet */
int num_frags; /* number of fragments in frags containing data */
......@@ -484,8 +372,6 @@ struct net_pkt_xmt {
struct net_pkt_xmtdone {
u32 xmt_done_result; /* result of NET_XMIT */
#define XMIT_SUCCESS 0
#define XMIT_FAILED 1
};
/* RCVPOST_BUF_SIZe must be at most page_size(4096) - cache_line_size (64) The
......@@ -582,7 +468,6 @@ struct uiscmdrsp_scsitaskmgmt {
/* result of taskmgmt command - set by IOPart - values are: */
#define TASK_MGMT_FAILED 0
#define TASK_MGMT_SUCCESS 1
};
/* The following is used by uissd to send disk add/remove notifications to
......@@ -629,7 +514,6 @@ struct uiscmdrsp_vdiskmgmt {
/* result of taskmgmt command - set by IOPart - values are: */
#define VDISK_MGMT_FAILED 0
#define VDISK_MGMT_SUCCESS 1
};
/* keeping cmd & rsp info in one structure for now cmd rsp packet for scsi */
......@@ -684,26 +568,6 @@ struct spar_io_channel_protocol {
#pragma pack(pop)
/* ///////////// END PRAGMA PACK PUSH 1 /////////////////////////// */
/* define offsets to members of struct uiscmdrsp */
#define OFFSET_CMDTYPE offsetof(struct uiscmdrsp, cmdtype)
#define OFFSET_SCSI offsetof(struct uiscmdrsp, scsi)
#define OFFSET_NET offsetof(struct uiscmdrsp, net)
#define OFFSET_SCSITASKMGMT offsetof(struct uiscmdrsp, scsitaskmgmt)
#define OFFSET_NEXT offsetof(struct uiscmdrsp, next)
/* define offsets to members of struct uiscmdrsp_net */
#define OFFSET_TYPE offsetof(struct uiscmdrsp_net, type)
#define OFFSET_BUF offsetof(struct uiscmdrsp_net, buf)
#define OFFSET_XMT offsetof(struct uiscmdrsp_net, xmt)
#define OFFSET_XMT_DONE_RESULT offsetof(struct uiscmdrsp_net, xmtdone)
#define OFFSET_RCVPOST offsetof(struct uiscmdrsp_net, rcvpost)
#define OFFSET_RCV_DONE_LEN offsetof(struct uiscmdrsp_net, rcv)
#define OFFSET_ENBDIS offsetof(struct uiscmdrsp_net, enbdis)
/* define offsets to members of struct net_pkt_rcvpost */
#define OFFSET_TOTALLEN offsetof(struct net_pkt_rcvpost, totallen)
#define OFFSET_FRAG offsetof(struct net_pkt_rcvpost, frag)
/*
* INLINE functions for initializing and accessing I/O data channels
*/
......@@ -724,7 +588,6 @@ struct spar_io_channel_protocol {
/* Guest and IOPartition. */
#define PI_PAGE_SIZE 0x1000
#define PI_PAGE_MASK 0x0FFF
#define PI_PAGE_SHIFT 12
/* returns next non-zero index on success or zero on failure (i.e. out of
* room)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或