ath6kl: move bmi calls to hif driver

In preparation for USB support which has it's own method for bmi.

Based on code by Kevin Fang.
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath6kl/bmi.c

@@ -19,165 +19,6 @@
 #include "target.h"
 #include "debug.h"
 
-static int ath6kl_get_bmi_cmd_credits(struct ath6kl *ar)
-{
-	u32 addr;
-	unsigned long timeout;
-	int ret;
-
-	ar->bmi.cmd_credits = 0;
-
-	/* Read the counter register to get the command credits */
-	addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
-
-	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
-	while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
-
-		/*
-		 * Hit the credit counter with a 4-byte access, the first byte
-		 * read will hit the counter and cause a decrement, while the
-		 * remaining 3 bytes has no effect. The rationale behind this
-		 * is to make all HIF accesses 4-byte aligned.
-		 */
-		ret = hif_read_write_sync(ar, addr,
-					 (u8 *)&ar->bmi.cmd_credits, 4,
-					 HIF_RD_SYNC_BYTE_INC);
-		if (ret) {
-			ath6kl_err("Unable to decrement the command credit count register: %d\n",
-				   ret);
-			return ret;
-		}
-
-		/* The counter is only 8 bits.
-		 * Ignore anything in the upper 3 bytes
-		 */
-		ar->bmi.cmd_credits &= 0xFF;
-	}
-
-	if (!ar->bmi.cmd_credits) {
-		ath6kl_err("bmi communication timeout\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
-}
-
-static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar)
-{
-	unsigned long timeout;
-	u32 rx_word = 0;
-	int ret = 0;
-
-	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
-	while (time_before(jiffies, timeout) && !rx_word) {
-		ret = hif_read_write_sync(ar, RX_LOOKAHEAD_VALID_ADDRESS,
-					  (u8 *)&rx_word, sizeof(rx_word),
-					  HIF_RD_SYNC_BYTE_INC);
-		if (ret) {
-			ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
-			return ret;
-		}
-
-		 /* all we really want is one bit */
-		rx_word &= (1 << ENDPOINT1);
-	}
-
-	if (!rx_word) {
-		ath6kl_err("bmi_recv_buf FIFO empty\n");
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-static int ath6kl_bmi_send_buf(struct ath6kl *ar, u8 *buf, u32 len)
-{
-	int ret;
-	u32 addr;
-
-	ret = ath6kl_get_bmi_cmd_credits(ar);
-	if (ret)
-		return ret;
-
-	addr = ar->mbox_info.htc_addr;
-
-	ret = hif_read_write_sync(ar, addr, buf, len,
-				  HIF_WR_SYNC_BYTE_INC);
-	if (ret)
-		ath6kl_err("unable to send the bmi data to the device\n");
-
-	return ret;
-}
-
-static int ath6kl_bmi_recv_buf(struct ath6kl *ar, u8 *buf, u32 len)
-{
-	int ret;
-	u32 addr;
-
-	/*
-	 * During normal bootup, small reads may be required.
-	 * Rather than issue an HIF Read and then wait as the Target
-	 * adds successive bytes to the FIFO, we wait here until
-	 * we know that response data is available.
-	 *
-	 * This allows us to cleanly timeout on an unexpected
-	 * Target failure rather than risk problems at the HIF level.
-	 * In particular, this avoids SDIO timeouts and possibly garbage
-	 * data on some host controllers.  And on an interconnect
-	 * such as Compact Flash (as well as some SDIO masters) which
-	 * does not provide any indication on data timeout, it avoids
-	 * a potential hang or garbage response.
-	 *
-	 * Synchronization is more difficult for reads larger than the
-	 * size of the MBOX FIFO (128B), because the Target is unable
-	 * to push the 129th byte of data until AFTER the Host posts an
-	 * HIF Read and removes some FIFO data.  So for large reads the
-	 * Host proceeds to post an HIF Read BEFORE all the data is
-	 * actually available to read.  Fortunately, large BMI reads do
-	 * not occur in practice -- they're supported for debug/development.
-	 *
-	 * So Host/Target BMI synchronization is divided into these cases:
-	 *  CASE 1: length < 4
-	 *        Should not happen
-	 *
-	 *  CASE 2: 4 <= length <= 128
-	 *        Wait for first 4 bytes to be in FIFO
-	 *        If CONSERVATIVE_BMI_READ is enabled, also wait for
-	 *        a BMI command credit, which indicates that the ENTIRE
-	 *        response is available in the the FIFO
-	 *
-	 *  CASE 3: length > 128
-	 *        Wait for the first 4 bytes to be in FIFO
-	 *
-	 * For most uses, a small timeout should be sufficient and we will
-	 * usually see a response quickly; but there may be some unusual
-	 * (debug) cases of BMI_EXECUTE where we want an larger timeout.
-	 * For now, we use an unbounded busy loop while waiting for
-	 * BMI_EXECUTE.
-	 *
-	 * If BMI_EXECUTE ever needs to support longer-latency execution,
-	 * especially in production, this code needs to be enhanced to sleep
-	 * and yield.  Also note that BMI_COMMUNICATION_TIMEOUT is currently
-	 * a function of Host processor speed.
-	 */
-	if (len >= 4) { /* NB: Currently, always true */
-		ret = ath6kl_bmi_get_rx_lkahd(ar);
-		if (ret)
-			return ret;
-	}
-
-	addr = ar->mbox_info.htc_addr;
-	ret = hif_read_write_sync(ar, addr, buf, len,
-				  HIF_RD_SYNC_BYTE_INC);
-	if (ret) {
-		ath6kl_err("Unable to read the bmi data from the device: %d\n",
-			   ret);
-		return ret;
-	}
-
-	return 0;
-}
-
 int ath6kl_bmi_done(struct ath6kl *ar)
 {
 	int ret;
@@ -190,7 +31,7 @@ int ath6kl_bmi_done(struct ath6kl *ar)
 
 	ar->bmi.done_sent = true;
 
-	ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));
+	ret = ath6kl_hif_bmi_write(ar, (u8 *)&cid, sizeof(cid));
 	if (ret) {
 		ath6kl_err("Unable to send bmi done: %d\n", ret);
 		return ret;
@@ -210,13 +51,13 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
 		return -EACCES;
 	}
 
-	ret = ath6kl_bmi_send_buf(ar, (u8 *)&cid, sizeof(cid));
+	ret = ath6kl_hif_bmi_write(ar, (u8 *)&cid, sizeof(cid));
 	if (ret) {
 		ath6kl_err("Unable to send get target info: %d\n", ret);
 		return ret;
 	}
 
-	ret = ath6kl_bmi_recv_buf(ar, (u8 *)&targ_info->version,
+	ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
 				  sizeof(targ_info->version));
 	if (ret) {
 		ath6kl_err("Unable to recv target info: %d\n", ret);
@@ -225,7 +66,7 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
 
 	if (le32_to_cpu(targ_info->version) == TARGET_VERSION_SENTINAL) {
 		/* Determine how many bytes are in the Target's targ_info */
-		ret = ath6kl_bmi_recv_buf(ar,
+		ret = ath6kl_hif_bmi_read(ar,
 				   (u8 *)&targ_info->byte_count,
 				   sizeof(targ_info->byte_count));
 		if (ret) {
@@ -244,7 +85,7 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
 		}
 
 		/* Read the remainder of the targ_info */
-		ret = ath6kl_bmi_recv_buf(ar,
+		ret = ath6kl_hif_bmi_read(ar,
 				   ((u8 *)targ_info) +
 				   sizeof(targ_info->byte_count),
 				   sizeof(*targ_info) -
@@ -300,13 +141,13 @@ int ath6kl_bmi_read(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)
 		memcpy(&(ar->bmi.cmd_buf[offset]), &rx_len, sizeof(rx_len));
 		offset += sizeof(len);
 
-		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+		ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 		if (ret) {
 			ath6kl_err("Unable to write to the device: %d\n",
 				   ret);
 			return ret;
 		}
-		ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, rx_len);
+		ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, rx_len);
 		if (ret) {
 			ath6kl_err("Unable to read from the device: %d\n",
 				   ret);
@@ -371,7 +212,7 @@ int ath6kl_bmi_write(struct ath6kl *ar, u32 addr, u8 *buf, u32 len)
 		memcpy(&(ar->bmi.cmd_buf[offset]), src, tx_len);
 		offset += tx_len;
 
-		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+		ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 		if (ret) {
 			ath6kl_err("Unable to write to the device: %d\n",
 				   ret);
@@ -413,13 +254,13 @@ int ath6kl_bmi_execute(struct ath6kl *ar, u32 addr, u32 *param)
 	memcpy(&(ar->bmi.cmd_buf[offset]), param, sizeof(*param));
 	offset += sizeof(*param);
 
-	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 	if (ret) {
 		ath6kl_err("Unable to write to the device: %d\n", ret);
 		return ret;
 	}
 
-	ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param));
+	ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, sizeof(*param));
 	if (ret) {
 		ath6kl_err("Unable to read from the device: %d\n", ret);
 		return ret;
@@ -457,7 +298,7 @@ int ath6kl_bmi_set_app_start(struct ath6kl *ar, u32 addr)
 	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
 	offset += sizeof(addr);
 
-	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 	if (ret) {
 		ath6kl_err("Unable to write to the device: %d\n", ret);
 		return ret;
@@ -493,13 +334,13 @@ int ath6kl_bmi_reg_read(struct ath6kl *ar, u32 addr, u32 *param)
 	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
 	offset += sizeof(addr);
 
-	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 	if (ret) {
 		ath6kl_err("Unable to write to the device: %d\n", ret);
 		return ret;
 	}
 
-	ret = ath6kl_bmi_recv_buf(ar, ar->bmi.cmd_buf, sizeof(*param));
+	ret = ath6kl_hif_bmi_read(ar, ar->bmi.cmd_buf, sizeof(*param));
 	if (ret) {
 		ath6kl_err("Unable to read from the device: %d\n", ret);
 		return ret;
@@ -540,7 +381,7 @@ int ath6kl_bmi_reg_write(struct ath6kl *ar, u32 addr, u32 param)
 	memcpy(&(ar->bmi.cmd_buf[offset]), &param, sizeof(param));
 	offset += sizeof(param);
 
-	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 	if (ret) {
 		ath6kl_err("Unable to write to the device: %d\n", ret);
 		return ret;
@@ -587,7 +428,7 @@ int ath6kl_bmi_lz_data(struct ath6kl *ar, u8 *buf, u32 len)
 			tx_len);
 		offset += tx_len;
 
-		ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+		ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 		if (ret) {
 			ath6kl_err("Unable to write to the device: %d\n",
 				   ret);
@@ -629,7 +470,7 @@ int ath6kl_bmi_lz_stream_start(struct ath6kl *ar, u32 addr)
 	memcpy(&(ar->bmi.cmd_buf[offset]), &addr, sizeof(addr));
 	offset += sizeof(addr);
 
-	ret = ath6kl_bmi_send_buf(ar, ar->bmi.cmd_buf, offset);
+	ret = ath6kl_hif_bmi_write(ar, ar->bmi.cmd_buf, offset);
 	if (ret) {
 		ath6kl_err("Unable to start LZ stream to the device: %d\n",
 			   ret);

drivers/net/wireless/ath/ath6kl/hif-ops.h

@@ -91,6 +91,16 @@ static inline int ath6kl_hif_suspend(struct ath6kl *ar,
 	return ar->hif_ops->suspend(ar, wow);
 }
 
+static inline int ath6kl_hif_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	return ar->hif_ops->bmi_read(ar, buf, len);
+}
+
+static inline int ath6kl_hif_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	return ar->hif_ops->bmi_write(ar, buf, len);
+}
+
 static inline int ath6kl_hif_resume(struct ath6kl *ar)
 {
 	ath6kl_dbg(ATH6KL_DBG_HIF, "hif resume\n");

drivers/net/wireless/ath/ath6kl/hif.h

@@ -244,6 +244,8 @@ struct ath6kl_hif_ops {
 	void (*cleanup_scatter)(struct ath6kl *ar);
 	int (*suspend)(struct ath6kl *ar, struct cfg80211_wowlan *wow);
 	int (*resume)(struct ath6kl *ar);
+	int (*bmi_read)(struct ath6kl *ar, u8 *buf, u32 len);
+	int (*bmi_write)(struct ath6kl *ar, u8 *buf, u32 len);
 	int (*power_on)(struct ath6kl *ar);
 	int (*power_off)(struct ath6kl *ar);
 	void (*stop)(struct ath6kl *ar);

drivers/net/wireless/ath/ath6kl/sdio.c

@@ -845,6 +845,166 @@ static int ath6kl_sdio_resume(struct ath6kl *ar)
 	return 0;
 }
 
+static int ath6kl_sdio_bmi_credits(struct ath6kl *ar)
+{
+	u32 addr;
+	unsigned long timeout;
+	int ret;
+
+	ar->bmi.cmd_credits = 0;
+
+	/* Read the counter register to get the command credits */
+	addr = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
+
+	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+	while (time_before(jiffies, timeout) && !ar->bmi.cmd_credits) {
+
+		/*
+		 * Hit the credit counter with a 4-byte access, the first byte
+		 * read will hit the counter and cause a decrement, while the
+		 * remaining 3 bytes has no effect. The rationale behind this
+		 * is to make all HIF accesses 4-byte aligned.
+		 */
+		ret = ath6kl_sdio_read_write_sync(ar, addr,
+					 (u8 *)&ar->bmi.cmd_credits, 4,
+					 HIF_RD_SYNC_BYTE_INC);
+		if (ret) {
+			ath6kl_err("Unable to decrement the command credit "
+						"count register: %d\n", ret);
+			return ret;
+		}
+
+		/* The counter is only 8 bits.
+		 * Ignore anything in the upper 3 bytes
+		 */
+		ar->bmi.cmd_credits &= 0xFF;
+	}
+
+	if (!ar->bmi.cmd_credits) {
+		ath6kl_err("bmi communication timeout\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int ath6kl_bmi_get_rx_lkahd(struct ath6kl *ar)
+{
+	unsigned long timeout;
+	u32 rx_word = 0;
+	int ret = 0;
+
+	timeout = jiffies + msecs_to_jiffies(BMI_COMMUNICATION_TIMEOUT);
+	while ((time_before(jiffies, timeout)) && !rx_word) {
+		ret = ath6kl_sdio_read_write_sync(ar,
+					RX_LOOKAHEAD_VALID_ADDRESS,
+					(u8 *)&rx_word, sizeof(rx_word),
+					HIF_RD_SYNC_BYTE_INC);
+		if (ret) {
+			ath6kl_err("unable to read RX_LOOKAHEAD_VALID\n");
+			return ret;
+		}
+
+		 /* all we really want is one bit */
+		rx_word &= (1 << ENDPOINT1);
+	}
+
+	if (!rx_word) {
+		ath6kl_err("bmi_recv_buf FIFO empty\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int ath6kl_sdio_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	int ret;
+	u32 addr;
+
+	ret = ath6kl_sdio_bmi_credits(ar);
+	if (ret)
+		return ret;
+
+	addr = ar->mbox_info.htc_addr;
+
+	ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
+					  HIF_WR_SYNC_BYTE_INC);
+	if (ret)
+		ath6kl_err("unable to send the bmi data to the device\n");
+
+	return ret;
+}
+
+static int ath6kl_sdio_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	int ret;
+	u32 addr;
+
+	/*
+	 * During normal bootup, small reads may be required.
+	 * Rather than issue an HIF Read and then wait as the Target
+	 * adds successive bytes to the FIFO, we wait here until
+	 * we know that response data is available.
+	 *
+	 * This allows us to cleanly timeout on an unexpected
+	 * Target failure rather than risk problems at the HIF level.
+	 * In particular, this avoids SDIO timeouts and possibly garbage
+	 * data on some host controllers.  And on an interconnect
+	 * such as Compact Flash (as well as some SDIO masters) which
+	 * does not provide any indication on data timeout, it avoids
+	 * a potential hang or garbage response.
+	 *
+	 * Synchronization is more difficult for reads larger than the
+	 * size of the MBOX FIFO (128B), because the Target is unable
+	 * to push the 129th byte of data until AFTER the Host posts an
+	 * HIF Read and removes some FIFO data.  So for large reads the
+	 * Host proceeds to post an HIF Read BEFORE all the data is
+	 * actually available to read.  Fortunately, large BMI reads do
+	 * not occur in practice -- they're supported for debug/development.
+	 *
+	 * So Host/Target BMI synchronization is divided into these cases:
+	 *  CASE 1: length < 4
+	 *        Should not happen
+	 *
+	 *  CASE 2: 4 <= length <= 128
+	 *        Wait for first 4 bytes to be in FIFO
+	 *        If CONSERVATIVE_BMI_READ is enabled, also wait for
+	 *        a BMI command credit, which indicates that the ENTIRE
+	 *        response is available in the the FIFO
+	 *
+	 *  CASE 3: length > 128
+	 *        Wait for the first 4 bytes to be in FIFO
+	 *
+	 * For most uses, a small timeout should be sufficient and we will
+	 * usually see a response quickly; but there may be some unusual
+	 * (debug) cases of BMI_EXECUTE where we want an larger timeout.
+	 * For now, we use an unbounded busy loop while waiting for
+	 * BMI_EXECUTE.
+	 *
+	 * If BMI_EXECUTE ever needs to support longer-latency execution,
+	 * especially in production, this code needs to be enhanced to sleep
+	 * and yield.  Also note that BMI_COMMUNICATION_TIMEOUT is currently
+	 * a function of Host processor speed.
+	 */
+	if (len >= 4) { /* NB: Currently, always true */
+		ret = ath6kl_bmi_get_rx_lkahd(ar);
+		if (ret)
+			return ret;
+	}
+
+	addr = ar->mbox_info.htc_addr;
+	ret = ath6kl_sdio_read_write_sync(ar, addr, buf, len,
+				  HIF_RD_SYNC_BYTE_INC);
+	if (ret) {
+		ath6kl_err("Unable to read the bmi data from the device: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static void ath6kl_sdio_stop(struct ath6kl *ar)
 {
 	struct ath6kl_sdio *ar_sdio = ath6kl_sdio_priv(ar);
@@ -889,6 +1049,8 @@ static const struct ath6kl_hif_ops ath6kl_sdio_ops = {
 	.cleanup_scatter = ath6kl_sdio_cleanup_scatter,
 	.suspend = ath6kl_sdio_suspend,
 	.resume = ath6kl_sdio_resume,
+	.bmi_read = ath6kl_sdio_bmi_read,
+	.bmi_write = ath6kl_sdio_bmi_write,
 	.power_on = ath6kl_sdio_power_on,
 	.power_off = ath6kl_sdio_power_off,
 	.stop = ath6kl_sdio_stop,