Blackfin arch: Clean up trace buffer handling, No major functional changes.

Turns on trace earlier, so crashes at kernel start should print out a
trace, making things easier to debug.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>

arch/blackfin/kernel/setup.c

@@ -194,6 +194,17 @@ void __init setup_arch(char **cmdline_p)
 	/* this give a chance to get printk() working before crash. */
 #endif
 
+	printk(KERN_INFO "Hardware Trace ");
+	if (bfin_read_TBUFCTL() & 0x1 )
+		printk("Active ");
+	else
+		printk("Off ");
+	if (bfin_read_TBUFCTL() & 0x2)
+		printk("and Enabled\n");
+	else
+	printk("and Disabled\n");
+
+
 #if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
 	/* we need to initialize the Flashrom device here since we might
 	 * do things with flash early on in the boot
@@ -397,9 +408,6 @@ void __init setup_arch(char **cmdline_p)
 	_bfin_swrst = bfin_read_SWRST();
 #endif
 
-	printk(KERN_INFO "Hardware Trace Enabled\n");
-	bfin_write_TBUFCTL(0x03);
-
 	/* Copy atomic sequences to their fixed location, and sanity check that
 	   these locations are the ones that we advertise to userspace.  */
 	memcpy((void *)FIXED_CODE_START, &fixed_code_start,

arch/blackfin/kernel/traps.c

@@ -33,6 +33,7 @@
 #include <asm/blackfin.h>
 #include <asm/uaccess.h>
 #include <asm/irq_handler.h>
+#include <asm/trace.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kallsyms.h>
@@ -131,16 +132,6 @@ static int printk_address(unsigned long address)
 	return printk("[<0x%p>]", (void*)address);
 }
 
-#define trace_buffer_save(x) \
-	do { \
-		(x) = bfin_read_TBUFCTL(); \
-		bfin_write_TBUFCTL((x) & ~TBUFEN); \
-	} while (0)
-#define trace_buffer_restore(x) \
-	do { \
-		bfin_write_TBUFCTL((x));	\
-	} while (0)
-
 asmlinkage void trap_c(struct pt_regs *fp)
 {
 	int j, sig = 0;

arch/blackfin/mach-bf533/head.S

@@ -30,6 +30,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
+#include <asm/trace.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
 #endif
@@ -96,6 +97,10 @@ ENTRY(__start)
 	M2 = r0;
 	M3 = r0;
 
+	trace_buffer_start(p0,r0);
+	P0 = R1;
+	R0 = R1;
+
 #if CONFIG_DEBUG_KERNEL_START
 
 /*

arch/blackfin/mach-bf537/head.S

@@ -30,6 +30,8 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
+#include <asm/trace.h>
+
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
 #endif
@@ -93,6 +95,10 @@ ENTRY(__start)
 	M2 = r0;
 	M3 = r0;
 
+	trace_buffer_start(p0,r0);
+	P0 = R1;
+	R0 = R1;
+
 	/* Turn off the icache */
 	p0.l = (IMEM_CONTROL & 0xFFFF);
 	p0.h = (IMEM_CONTROL >> 16);

arch/blackfin/mach-bf548/head.S

@@ -29,6 +29,7 @@
 
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
+#include <asm/trace.h>
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
 #endif
@@ -91,6 +92,10 @@ ENTRY(__stext)
 	M2 = r0;
 	M3 = r0;
 
+	trace_buffer_start(p0,r0);
+	P0 = R1;
+	R0 = R1;
+
 	/* Turn off the icache */
 	p0.l = (IMEM_CONTROL & 0xFFFF);
 	p0.h = (IMEM_CONTROL >> 16);

arch/blackfin/mach-bf561/head.S

@@ -30,6 +30,8 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
+#include <asm/trace.h>
+
 #if CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach/mem_init.h>
 #endif
@@ -93,6 +95,10 @@ ENTRY(__start)
 	M2 = r0;
 	M3 = r0;
 
+	trace_buffer_start(p0,r0);
+	P0 = R1;
+	R0 = R1;
+
 	/* Turn off the icache */
 	p0.l = (IMEM_CONTROL & 0xFFFF);
 	p0.h = (IMEM_CONTROL >> 16);

arch/blackfin/mach-common/entry.S

@@ -54,29 +54,10 @@
 #include <asm/errno.h>
 #include <asm/thread_info.h>  /* TIF_NEED_RESCHED */
 #include <asm/asm-offsets.h>
+#include <asm/trace.h>
 
 #include <asm/mach-common/context.S>
 
-#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
-	/*
-	 * TODO: this should be proper save/restore, but for now
-	 * we'll just cheat and use 0x1/0x13
-	 */
-# define DEBUG_START_HWTRACE \
-	P5.l = LO(TBUFCTL); \
-	P5.h = HI(TBUFCTL); \
-	R7 = 0x13; \
-	[P5] = R7;
-# define DEBUG_STOP_HWTRACE \
-	P5.l = LO(TBUFCTL); \
-	P5.h = HI(TBUFCTL); \
-	R7 = 0x01; \
-	[P5] = R7;
-#else
-# define DEBUG_START_HWTRACE
-# define DEBUG_STOP_HWTRACE
-#endif
-
 #ifdef CONFIG_EXCPT_IRQ_SYSC_L1
 .section .l1.text
 #else
@@ -110,7 +91,7 @@ ENTRY(_ex_icplb)
 	ASTAT = [sp++];
 	SAVE_ALL_SYS
 	call __cplb_hdr;
-	DEBUG_START_HWTRACE
+	DEBUG_START_HWTRACE(p5, r7)
 	RESTORE_ALL_SYS
 	SP = RETN;
 	rtx;
@@ -128,7 +109,7 @@ ENTRY(_ex_spinlock)
 ENDPROC(_ex_spinlock)
 
 ENTRY(_ex_syscall)
-	DEBUG_START_HWTRACE
+	DEBUG_START_HWTRACE(p5, r7)
 	(R7:6,P5:4) = [sp++];
 	ASTAT = [sp++];
 	raise 15;		/* invoked by TRAP #0, for sys call */
@@ -186,7 +167,7 @@ ENTRY(_ex_single_step)
 	if !cc jump _ex_trap_c;
 
 _return_from_exception:
-	DEBUG_START_HWTRACE
+	DEBUG_START_HWTRACE(p5, r7)
 #ifdef ANOMALY_05000257
 	R7=LC0;
 	LC0=R7;
@@ -208,7 +189,7 @@ ENTRY(_handle_bad_cplb)
 	 * need to make a CPLB exception look like a normal exception
 	 */
 
-	DEBUG_START_HWTRACE
+	DEBUG_START_HWTRACE(p5, r7)
 	RESTORE_ALL_SYS
 	[--sp] = ASTAT;
 	[--sp] = (R7:6, P5:4);
@@ -251,7 +232,7 @@ ENTRY(_ex_trap_c)
 	R6 = SEQSTAT;
 	[P5] = R6;
 
-	DEBUG_START_HWTRACE
+	DEBUG_START_HWTRACE(p5, r7)
 	(R7:6,P5:4) = [sp++];
 	ASTAT = [sp++];
 	SP = RETN;
@@ -335,7 +316,7 @@ ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/
 	/* Try to deal with syscalls quickly.  */
 	[--sp] = ASTAT;
 	[--sp] = (R7:6, P5:4);
-	DEBUG_STOP_HWTRACE
+	DEBUG_STOP_HWTRACE(p5, r7)
 	r7 = SEQSTAT;		/* reason code is in bit 5:0 */
 	r6.l = lo(SEQSTAT_EXCAUSE);
 	r6.h = hi(SEQSTAT_EXCAUSE);

arch/blackfin/mach-common/interrupt.S

@@ -34,6 +34,7 @@
 #include <linux/linkage.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
+#include <asm/trace.h>
 
 #include <asm/mach-common/context.S>
 
@@ -170,10 +171,9 @@ ENTRY(_evt_ivhw)
 	r7.l = W[p5];
 1:
 #endif
-	p0.l = lo(TBUFCTL);
-	p0.h = hi(TBUFCTL);
-	r0 = 1;
-	[p0] = r0;
+
+	trace_buffer_stop(p0, r0);
+
 	r0 = IRQ_HWERR;
 	r1 = sp;
 

include/asm-blackfin/trace.h

+/*
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _BLACKFIN_TRACE_
+#define _BLACKFIN_TRACE_
+
+#ifndef __ASSEMBLY__
+/* Trace Macros for C files */
+
+#define trace_buffer_save(x) \
+        do { \
+                (x) = bfin_read_TBUFCTL(); \
+                bfin_write_TBUFCTL((x) & ~TBUFEN); \
+        } while (0)
+
+#define trace_buffer_restore(x) \
+        do { \
+                bfin_write_TBUFCTL((x));        \
+        } while (0)
+
+#else
+/* Trace Macros for Assembly files */
+
+#define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg)
+#define TRACE_BUFFER_STOP(preg, dreg)  trace_buffer_stop(preg, dreg)
+
+#define trace_buffer_stop(preg, dreg)	\
+	preg.L = LO(TBUFCTL);		\
+	preg.H = HI(TBUFCTL);		\
+	dreg = 0x1;			\
+	[preg] = dreg;
+
+#define trace_buffer_start(preg, dreg) \
+	preg.L = LO(TBUFCTL);		\
+	preg.H = HI(TBUFCTL);		\
+	dreg = 0x13;			\
+	[preg] = dreg;
+
+#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+# define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg)
+# define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg)
+
+#else
+# define DEBUG_START_HWTRACE(preg, dreg)
+# define DEBUG_STOP_HWTRACE(preg, dreg)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif				/* _BLACKFIN_TRACE_ */