i2c: s3c2410: Add fix for i2c suspend/resume

The I2C driver makes a gpio_request during initialization. This request
happens again on resume and fails due to the earlier successful request.
Re-factor the code to only initialize the gpios during probe.

Errors on resume without this:
[   16.020000] s3c-i2c s3c2440-i2c.0: gpio [42] request failed
[   16.020000] s3c-i2c s3c2440-i2c.1: gpio [44] request failed
[   16.020000] s3c-i2c s3c2440-i2c.2: gpio [6] request failed
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

drivers/i2c/busses/i2c-s3c2410.c

@@ -908,13 +908,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 
 	pdata = i2c->pdata;
 
-	/* inititalise the gpio */
-
-	if (pdata->cfg_gpio)
-		pdata->cfg_gpio(to_platform_device(i2c->dev));
-	else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c))
-		return -EINVAL;
-
 	/* write slave address */
 
 	writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
@@ -1055,6 +1048,15 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 
 	i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
 
+	/* inititalise the i2c gpio lines */
+
+	if (i2c->pdata->cfg_gpio) {
+		i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
+	} else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) {
+		ret = -EINVAL;
+		goto err_clk;
+	}
+
 	/* initialise the i2c controller */
 
 	ret = s3c24xx_i2c_init(i2c);