提交 656217d2 编写于 作者: M Martin Fuzzey 提交者: Pierre Ossman

mxcmmc: Fix missing return value checking in DMA setup code.

Signed-off-by: NMartin Fuzzey <mfuzzey@gmail.com>
上级 18489fa2
......@@ -162,7 +162,7 @@ static void mxcmci_softreset(struct mxcmci_host *host)
writew(0xff, host->base + MMC_REG_RES_TO);
}
static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
{
unsigned int nob = data->blocks;
unsigned int blksz = data->blksz;
......@@ -170,6 +170,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
#ifdef HAS_DMA
struct scatterlist *sg;
int i;
int ret;
#endif
if (data->flags & MMC_DATA_STREAM)
nob = 0xffff;
......@@ -185,7 +186,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->offset & 3 || sg->length & 3) {
host->do_dma = 0;
return;
return 0;
}
}
......@@ -194,23 +195,30 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, host->dma_dir);
imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
host->res->start + MMC_REG_BUFFER_ACCESS,
DMA_MODE_READ);
ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
datasize,
host->res->start + MMC_REG_BUFFER_ACCESS,
DMA_MODE_READ);
} else {
host->dma_dir = DMA_TO_DEVICE;
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, host->dma_dir);
imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
host->res->start + MMC_REG_BUFFER_ACCESS,
DMA_MODE_WRITE);
ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
datasize,
host->res->start + MMC_REG_BUFFER_ACCESS,
DMA_MODE_WRITE);
}
if (ret) {
dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret);
return ret;
}
wmb();
imx_dma_enable(host->dma);
#endif /* HAS_DMA */
return 0;
}
static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
......@@ -536,6 +544,7 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
{
struct mxcmci_host *host = mmc_priv(mmc);
unsigned int cmdat = host->cmdat;
int error;
WARN_ON(host->req != NULL);
......@@ -545,7 +554,12 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
host->do_dma = 1;
#endif
if (req->data) {
mxcmci_setup_data(host, req->data);
error = mxcmci_setup_data(host, req->data);
if (error) {
req->cmd->error = error;
goto out;
}
cmdat |= CMD_DAT_CONT_DATA_ENABLE;
......@@ -553,7 +567,9 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req)
cmdat |= CMD_DAT_CONT_WRITE;
}
if (mxcmci_start_cmd(host, req->cmd, cmdat))
error = mxcmci_start_cmd(host, req->cmd, cmdat);
out:
if (error)
mxcmci_finish_request(host, req);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册