Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 652bcd8f 编写于 作者: T Tony Lindgren
浏览文件
操作

omap mmc: Remove broken MMC init code 

Most of the omap1 MMC boards got broken by an earlier patch
138ab9f8. If you look closely,
the MMC init funtions are pretty much just stubs.

Remove broken init code to make room for cleaner MMC init code.

Cc: Pierre Ossman <drzeus-mmc@drzeus.cx>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 2619bc32
隐藏空白更改
内联 并排
Showing with 1 addition and 309 deletion
arch/arm/mach-omap1/board-h2-mmc.c
浏览文件 @ 652bcd8f
......@@ -15,91 +15,6 @@
#include <mach/mmc.h>
#include <mach/gpio.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
static struct device *mmc_device;
static int h2_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
power_on ? "on" : "off", vdd);
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
return 0;
}
static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
return 0;
}
static int h2_mmc_get_cover_state(struct device *dev, int slot)
{
BUG_ON(slot != 0);
return slot_cover_open;
}
void h2_mmc_slot_cover_handler(void *arg, int state)
{
if (mmc_device == NULL)
return;
slot_cover_open = state;
omap_mmc_notify_cover_event(mmc_device, 0, state);
}
static int h2_mmc_late_init(struct device *dev)
{
int ret = 0;
mmc_device = dev;
return ret;
}
static void h2_mmc_cleanup(struct device *dev)
{
}
static struct omap_mmc_platform_data h2_mmc_data = {
.nr_slots = 1,
.switch_slot = NULL,
.init = h2_mmc_late_init,
.cleanup = h2_mmc_cleanup,
.slots[0] = {
.set_power = h2_mmc_set_power,
.set_bus_mode = h2_mmc_set_bus_mode,
.get_ro = NULL,
.get_cover_state = h2_mmc_get_cover_state,
.ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
void __init h2_mmc_init(void)
{
omap_set_mmc_info(1, &h2_mmc_data);
}
#else
void __init h2_mmc_init(void)
{
}
......@@ -107,4 +22,3 @@ void __init h2_mmc_init(void)
void h2_mmc_slot_cover_handler(void *arg, int state)
{
}
#endif
arch/arm/mach-omap1/board-h2.c
浏览文件 @ 652bcd8f
......@@ -378,15 +378,6 @@ static struct omap_usb_config h2_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_mmc_config h2_mmc_config __initdata = {
.mmc[0] = {
.enabled = 1,
.wire4 = 1,
},
};
extern struct omap_mmc_platform_data h2_mmc_data;
static struct omap_uart_config h2_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
......@@ -397,7 +388,6 @@ static struct omap_lcd_config h2_lcd_config __initdata = {
static struct omap_board_config_kernel h2_config[] __initdata = {
{ OMAP_TAG_USB, &h2_usb_config },
{ OMAP_TAG_MMC, &h2_mmc_config },
{ OMAP_TAG_UART, &h2_uart_config },
{ OMAP_TAG_LCD, &h2_lcd_config },
};
......
arch/arm/mach-omap1/board-h3-mmc.c
浏览文件 @ 652bcd8f
......@@ -15,95 +15,6 @@
#include <mach/mmc.h>
#include <mach/gpio.h>
#ifdef CONFIG_MMC_OMAP
static int slot_cover_open;
static struct device *mmc_device;
static int h3_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
power_on ? "on" : "off", vdd);
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
return 0;
}
static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
{
int ret = 0;
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
/* Treated on upper level */
return bus_mode;
}
static int h3_mmc_get_cover_state(struct device *dev, int slot)
{
BUG_ON(slot != 0);
return slot_cover_open;
}
void h3_mmc_slot_cover_handler(void *arg, int state)
{
if (mmc_device == NULL)
return;
slot_cover_open = state;
omap_mmc_notify_cover_event(mmc_device, 0, state);
}
static int h3_mmc_late_init(struct device *dev)
{
int ret = 0;
mmc_device = dev;
return ret;
}
static void h3_mmc_cleanup(struct device *dev)
{
}
static struct omap_mmc_platform_data h3_mmc_data = {
.nr_slots = 1,
.switch_slot = NULL,
.init = h3_mmc_late_init,
.cleanup = h3_mmc_cleanup,
.slots[0] = {
.set_power = h3_mmc_set_power,
.set_bus_mode = h3_mmc_set_bus_mode,
.get_ro = NULL,
.get_cover_state = h3_mmc_get_cover_state,
.ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
void __init h3_mmc_init(void)
{
omap_set_mmc_info(1, &h3_mmc_data);
}
#else
void __init h3_mmc_init(void)
{
}
......@@ -111,4 +22,3 @@ void __init h3_mmc_init(void)
void h3_mmc_slot_cover_handler(void *arg, int state)
{
}
#endif
arch/arm/mach-omap1/board-h3.c
浏览文件 @ 652bcd8f
......@@ -447,15 +447,6 @@ static struct omap_usb_config h3_usb_config __initdata = {
.pins[1] = 3,
};
static struct omap_mmc_config h3_mmc_config __initdata = {
.mmc[0] = {
.enabled = 1,
.wire4 = 1,
},
};
extern struct omap_mmc_platform_data h3_mmc_data;
static struct omap_uart_config h3_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
......@@ -466,7 +457,6 @@ static struct omap_lcd_config h3_lcd_config __initdata = {
static struct omap_board_config_kernel h3_config[] __initdata = {
{ OMAP_TAG_USB, &h3_usb_config },
{ OMAP_TAG_MMC, &h3_mmc_config },
{ OMAP_TAG_UART, &h3_uart_config },
{ OMAP_TAG_LCD, &h3_lcd_config },
};
......
arch/arm/mach-omap1/board-palmte.c
浏览文件 @ 652bcd8f
......@@ -316,7 +316,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery)
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
{ OMAP_TAG_LCD, &palmte_lcd_config },
{ OMAP_TAG_UART, &palmte_uart_config },
};
......
arch/arm/mach-omap1/board-palmz71.c
浏览文件 @ 652bcd8f
......@@ -267,16 +267,6 @@ static struct omap_usb_config palmz71_usb_config __initdata = {
.pins[0] = 2,
};
static struct omap_mmc_config palmz71_mmc_config __initdata = {
.mmc[0] = {
.enabled = 1,
.wire4 = 0,
.wp_pin = PALMZ71_MMC_WP_GPIO,
.power_pin = -1,
.switch_pin = PALMZ71_MMC_IN_GPIO,
},
};
static struct omap_lcd_config palmz71_lcd_config __initdata = {
.ctrl_name = "internal",
};
......@@ -287,7 +277,6 @@ static struct omap_uart_config palmz71_uart_config __initdata = {
static struct omap_board_config_kernel palmz71_config[] __initdata = {
{OMAP_TAG_USB, &palmz71_usb_config},
{OMAP_TAG_MMC, &palmz71_mmc_config},
{OMAP_TAG_LCD, &palmz71_lcd_config},
{OMAP_TAG_UART, &palmz71_uart_config},
};
......
arch/arm/mach-omap1/board-sx1-mmc.c
浏览文件 @ 652bcd8f
......@@ -48,59 +48,10 @@ static int sx1_mmc_set_power(struct device *dev, int slot, int power_on,
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
}
static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
{
#ifdef CONFIG_MMC_DEBUG
dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1,
bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
#endif
if (slot != 0) {
dev_err(dev, "No such slot %d\n", slot + 1);
return -ENODEV;
}
return 0;
}
static int sx1_mmc_get_cover_state(struct device *dev, int slot)
{
BUG_ON(slot != 0);
return slot_cover_open;
}
void sx1_mmc_slot_cover_handler(void *arg, int state)
{
if (mmc_device == NULL)
return;
slot_cover_open = state;
omap_mmc_notify_cover_event(mmc_device, 0, state);
}
static int sx1_mmc_late_init(struct device *dev)
{
int ret = 0;
mmc_device = dev;
return ret;
}
static void sx1_mmc_cleanup(struct device *dev)
{
}
static struct omap_mmc_platform_data sx1_mmc_data = {
.nr_slots = 1,
.switch_slot = NULL,
.init = sx1_mmc_late_init,
.cleanup = sx1_mmc_cleanup,
.slots[0] = {
.set_power = sx1_mmc_set_power,
.set_bus_mode = sx1_mmc_set_bus_mode,
.get_ro = NULL,
.get_cover_state = sx1_mmc_get_cover_state,
.ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
......
arch/arm/mach-omap1/board-sx1.c
浏览文件 @ 652bcd8f
......@@ -378,15 +378,6 @@ static struct omap_usb_config sx1_usb_config __initdata = {
.pins[2] = 0,
};
/*----------- MMC -------------------------*/
static struct omap_mmc_config sx1_mmc_config __initdata = {
.mmc [0] = {
.enabled = 1,
.wire4 = 0,
},
};
/*----------- LCD -------------------------*/
static struct platform_device sx1_lcd_device = {
......@@ -414,7 +405,6 @@ static struct omap_uart_config sx1_uart_config __initdata = {
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_USB, &sx1_usb_config },
{ OMAP_TAG_MMC, &sx1_mmc_config },
{ OMAP_TAG_LCD, &sx1_lcd_config },
{ OMAP_TAG_UART, &sx1_uart_config },
};
......
arch/arm/mach-omap1/board-voiceblue.c
浏览文件 @ 652bcd8f
......@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
......@@ -140,21 +141,12 @@ static struct omap_usb_config voiceblue_usb_config __initdata = {
.pins[2] = 6,
};
static struct omap_mmc_config voiceblue_mmc_config __initdata = {
.mmc[0] = {
.enabled = 1,
.power_pin = 2,
.switch_pin = -1,
},
};
static struct omap_uart_config voiceblue_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_board_config_kernel voiceblue_config[] = {
{ OMAP_TAG_USB, &voiceblue_usb_config },
{ OMAP_TAG_MMC, &voiceblue_mmc_config },
{ OMAP_TAG_UART, &voiceblue_uart_config },
};
......
arch/arm/mach-omap2/board-apollon.c
浏览文件 @ 652bcd8f
......@@ -261,16 +261,6 @@ static struct omap_uart_config apollon_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (0 << 1) | (0 << 2),
};
static struct omap_mmc_config apollon_mmc_config __initdata = {
.mmc [0] = {
.enabled = 1,
.wire4 = 1,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
static struct omap_usb_config apollon_usb_config __initdata = {
.register_dev = 1,
.hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */
......@@ -284,7 +274,6 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
static struct omap_board_config_kernel apollon_config[] = {
{ OMAP_TAG_UART, &apollon_uart_config },
{ OMAP_TAG_MMC, &apollon_mmc_config },
{ OMAP_TAG_USB, &apollon_usb_config },
{ OMAP_TAG_LCD, &apollon_lcd_config },
};
......
arch/arm/mach-omap2/board-generic.c
浏览文件 @ 652bcd8f
......@@ -41,19 +41,8 @@ static struct omap_uart_config generic_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_mmc_config generic_mmc_config __initdata = {
.mmc [0] = {
.enabled = 0,
.wire4 = 0,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
static struct omap_board_config_kernel generic_config[] = {
{ OMAP_TAG_UART, &generic_uart_config },
{ OMAP_TAG_MMC, &generic_mmc_config },
};
static void __init omap_generic_init(void)
......
arch/arm/mach-omap2/board-h4.c
浏览文件 @ 652bcd8f
......@@ -373,23 +373,12 @@ static struct omap_uart_config h4_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
static struct omap_mmc_config h4_mmc_config __initdata = {
.mmc [0] = {
.enabled = 1,
.wire4 = 1,
.wp_pin = -1,
.power_pin = -1,
.switch_pin = -1,
},
};
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel h4_config[] = {
{ OMAP_TAG_UART, &h4_uart_config },
{ OMAP_TAG_MMC, &h4_mmc_config },
{ OMAP_TAG_LCD, &h4_lcd_config },
};
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或