nvme-rdma: support up to 4 segments of inline data

Allow up to 4 segments of inline data for NVMF WRITE operations. This
reduces latency for small WRITEs by removing the need for the target to
issue a READ WR for IB, or a REG_MR + READ WR chain for iWarp.

Also cap the inline segments used based on the limitations of the
device.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

drivers/nvme/host/rdma.c

@@ -40,13 +40,14 @@
 
 #define NVME_RDMA_MAX_SEGMENTS		256
 
-#define NVME_RDMA_MAX_INLINE_SEGMENTS	1
+#define NVME_RDMA_MAX_INLINE_SEGMENTS	4
 
 struct nvme_rdma_device {
 	struct ib_device	*dev;
 	struct ib_pd		*pd;
 	struct kref		ref;
 	struct list_head	entry;
+	unsigned int		num_inline_segments;
 };
 
 struct nvme_rdma_qe {
@@ -117,6 +118,7 @@ struct nvme_rdma_ctrl {
 	struct sockaddr_storage src_addr;
 
 	struct nvme_ctrl	ctrl;
+	bool			use_inline_data;
 };
 
 static inline struct nvme_rdma_ctrl *to_rdma_ctrl(struct nvme_ctrl *ctrl)
@@ -249,7 +251,7 @@ static int nvme_rdma_create_qp(struct nvme_rdma_queue *queue, const int factor)
 	/* +1 for drain */
 	init_attr.cap.max_recv_wr = queue->queue_size + 1;
 	init_attr.cap.max_recv_sge = 1;
-	init_attr.cap.max_send_sge = 1 + NVME_RDMA_MAX_INLINE_SEGMENTS;
+	init_attr.cap.max_send_sge = 1 + dev->num_inline_segments;
 	init_attr.sq_sig_type = IB_SIGNAL_REQ_WR;
 	init_attr.qp_type = IB_QPT_RC;
 	init_attr.send_cq = queue->ib_cq;
@@ -374,6 +376,8 @@ nvme_rdma_find_get_device(struct rdma_cm_id *cm_id)
 		goto out_free_pd;
 	}
 
+	ndev->num_inline_segments = min(NVME_RDMA_MAX_INLINE_SEGMENTS,
+					ndev->dev->attrs.max_sge - 1);
 	list_add(&ndev->entry, &device_list);
 out_unlock:
 	mutex_unlock(&device_list_mutex);
@@ -925,6 +929,9 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work)
 	if (ret)
 		goto requeue;
 
+	if (ctrl->ctrl.sgls & (1 << 20))
+		ctrl->use_inline_data = true;
+
 	if (ctrl->ctrl.queue_count > 1) {
 		ret = nvme_rdma_configure_io_queues(ctrl, false);
 		if (ret)
@@ -1090,19 +1097,27 @@ static int nvme_rdma_set_sg_null(struct nvme_command *c)
 }
 
 static int nvme_rdma_map_sg_inline(struct nvme_rdma_queue *queue,
-		struct nvme_rdma_request *req, struct nvme_command *c)
+		struct nvme_rdma_request *req, struct nvme_command *c,
+		int count)
 {
 	struct nvme_sgl_desc *sg = &c->common.dptr.sgl;
+	struct scatterlist *sgl = req->sg_table.sgl;
+	struct ib_sge *sge = &req->sge[1];
+	u32 len = 0;
+	int i;
 
-	req->sge[1].addr = sg_dma_address(req->sg_table.sgl);
-	req->sge[1].length = sg_dma_len(req->sg_table.sgl);
-	req->sge[1].lkey = queue->device->pd->local_dma_lkey;
+	for (i = 0; i < count; i++, sgl++, sge++) {
+		sge->addr = sg_dma_address(sgl);
+		sge->length = sg_dma_len(sgl);
+		sge->lkey = queue->device->pd->local_dma_lkey;
+		len += sge->length;
+	}
 
 	sg->addr = cpu_to_le64(queue->ctrl->ctrl.icdoff);
-	sg->length = cpu_to_le32(sg_dma_len(req->sg_table.sgl));
+	sg->length = cpu_to_le32(len);
 	sg->type = (NVME_SGL_FMT_DATA_DESC << 4) | NVME_SGL_FMT_OFFSET;
 
-	req->num_sge++;
+	req->num_sge += count;
 	return 0;
 }
 
@@ -1195,15 +1210,16 @@ static int nvme_rdma_map_data(struct nvme_rdma_queue *queue,
 		goto out_free_table;
 	}
 
-	if (count == 1) {
+	if (count <= dev->num_inline_segments) {
 		if (rq_data_dir(rq) == WRITE && nvme_rdma_queue_idx(queue) &&
+		    queue->ctrl->use_inline_data &&
 		    blk_rq_payload_bytes(rq) <=
 				nvme_rdma_inline_data_size(queue)) {
-			ret = nvme_rdma_map_sg_inline(queue, req, c);
+			ret = nvme_rdma_map_sg_inline(queue, req, c, count);
 			goto out;
 		}
 
-		if (dev->pd->flags & IB_PD_UNSAFE_GLOBAL_RKEY) {
+		if (count == 1 && dev->pd->flags & IB_PD_UNSAFE_GLOBAL_RKEY) {
 			ret = nvme_rdma_map_sg_single(queue, req, c);
 			goto out;
 		}