Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 62f548d0 编写于 作者: F Ferruh Yigit 提交者： Dmitry Torokhov
浏览文件
操作

Input: cyttsp4 - use 16bit address for I2C/SPI communication 

In TSG4, register map is 512bytes long and to access all of it,
one bit from address byte is used (which bit to use differs for
I2C and SPI);

Since common code used for TSG3 and TSG4 for I2C, this parameter
wrongly used as u8. TSG3 does not access beyond 255 bytes
but TSG4 may.

Tested-on:TMA3XX DVB && TMA4XX DVB
Signed-off-by: NFerruh Yigit <fery@cypress.com>
Acked-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
上级 57961e3b
隐藏空白更改
内联 并排
Showing with 44 addition and 32 deletion
drivers/input/touchscreen/cyttsp4_core.h
浏览文件 @ 62f548d0
......@@ -369,9 +369,9 @@ struct cyttsp4 {
struct cyttsp4_bus_ops {
u16 bustype;
int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
const void *values);
int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
void *values);
};
......@@ -448,13 +448,13 @@ enum cyttsp4_event_id {
/* y-axis, 0:origin is on top side of panel, 1: bottom */
#define CY_PCFG_ORIGIN_Y_MASK 0x80
static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u8 addr, int size,
static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u16 addr, int size,
void *buf)
{
return ts->bus_ops->read(ts->dev, ts->xfer_buf, addr, size, buf);
}
static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u8 addr, int size,
static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u16 addr, int size,
const void *buf)
{
return ts->bus_ops->write(ts->dev, ts->xfer_buf, addr, size, buf);
......@@ -463,9 +463,9 @@ static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u8 addr, int size,
extern struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops,
struct device *dev, u16 irq, size_t xfer_buf_size);
extern int cyttsp4_remove(struct cyttsp4 *ts);
int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
u8 length, const void *values);
int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
u8 length, void *values);
extern const struct dev_pm_ops cyttsp4_pm_ops;
......
drivers/input/touchscreen/cyttsp4_spi.c
浏览文件 @ 62f548d0
......@@ -44,7 +44,7 @@
#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
u8 op, u8 reg, u8 *buf, int length)
u8 op, u16 reg, u8 *buf, int length)
{
struct spi_device *spi = to_spi_device(dev);
struct spi_message msg;
......@@ -63,14 +63,12 @@ static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
memset(rd_buf, 0, CY_SPI_CMD_BYTES);
if (reg > 255)
wr_buf[0] = op + CY_SPI_A8_BIT;
else
wr_buf[0] = op;
if (op == CY_SPI_WR_OP)
wr_buf[1] = reg % 256;
if (op == CY_SPI_WR_OP && length > 0)
memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
wr_buf[0] = op + (((reg >> 8) & 0x1) ? CY_SPI_A8_BIT : 0);
if (op == CY_SPI_WR_OP) {
wr_buf[1] = reg & 0xFF;
if (length > 0)
memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
}
memset(xfer, 0, sizeof(xfer));
spi_message_init(&msg);
......@@ -130,7 +128,7 @@ static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
}
static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, void *data)
u16 addr, u8 length, void *data)
{
int rc;
......@@ -143,7 +141,7 @@ static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
}
static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, const void *data)
u16 addr, u8 length, const void *data)
{
return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
length);
......
drivers/input/touchscreen/cyttsp_core.h
浏览文件 @ 62f548d0
......@@ -112,9 +112,9 @@ struct cyttsp;
struct cyttsp_bus_ops {
u16 bustype;
int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
const void *values);
int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
void *values);
};
......@@ -145,9 +145,9 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
struct device *dev, int irq, size_t xfer_buf_size);
void cyttsp_remove(struct cyttsp *ts);
int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
u8 length, const void *values);
int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
u8 length, void *values);
extern const struct dev_pm_ops cyttsp_pm_ops;
......
drivers/input/touchscreen/cyttsp_i2c_common.c
浏览文件 @ 62f548d0
......@@ -32,18 +32,20 @@
#include <linux/types.h>
int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, void *values)
u16 addr, u8 length, void *values)
{
struct i2c_client *client = to_i2c_client(dev);
u8 client_addr = client->addr | ((addr >> 8) & 0x1);
u8 addr_lo = addr & 0xFF;
struct i2c_msg msgs[] = {
{
.addr = client->addr,
.addr = client_addr,
.flags = 0,
.len = 1,
.buf = &addr,
.buf = &addr_lo,
},
{
.addr = client->addr,
.addr = client_addr,
.flags = I2C_M_RD,
.len = length,
.buf = values,
......@@ -60,17 +62,29 @@ int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data);
int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, const void *values)
u16 addr, u8 length, const void *values)
{
struct i2c_client *client = to_i2c_client(dev);
u8 client_addr = client->addr | ((addr >> 8) & 0x1);
u8 addr_lo = addr & 0xFF;
struct i2c_msg msgs[] = {
{
.addr = client_addr,
.flags = 0,
.len = length + 1,
.buf = xfer_buf,
},
};
int retval;
xfer_buf[0] = addr;
xfer_buf[0] = addr_lo;
memcpy(&xfer_buf[1], values, length);
retval = i2c_master_send(client, xfer_buf, length + 1);
retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (retval < 0)
return retval;
return retval < 0 ? retval : 0;
return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
}
EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data);
......
drivers/input/touchscreen/cyttsp_spi.c
浏览文件 @ 62f548d0
......@@ -41,7 +41,7 @@
#define CY_SPI_BITS_PER_WORD 8
static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
u8 op, u8 reg, u8 *buf, int length)
u8 op, u16 reg, u8 *buf, int length)
{
struct spi_device *spi = to_spi_device(dev);
struct spi_message msg;
......@@ -126,14 +126,14 @@ static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
}
static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, void *data)
u16 addr, u8 length, void *data)
{
return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
length);
}
static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
u8 addr, u8 length, const void *data)
u16 addr, u8 length, const void *data)
{
return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
length);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或