Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 62c7ae87 编写于 作者: P Paul Mundt
浏览文件
操作

sh: pci: Start unifying the SH7780 PCIC initialization. 

This starts moving out the common initialization bits from the various
fixup paths in to the shared init path.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 a6d377b6
隐藏空白更改
内联 并排
Showing with 37 addition and 70 deletion
arch/sh/drivers/pci/fixups-r7780rp.c
浏览文件 @ 62c7ae87
......@@ -22,33 +22,15 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
{
return irq_tab[slot];
}
int pci_fixup_pcic(struct pci_channel *chan)
{
pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD);
pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
pci_write_reg(chan, 0x00011912, SH7780_PCISVID);
pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
#ifdef CONFIG_32BIT
pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
#endif
/* Set IOBR for windows containing area specified in pci.h */
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
SH7780_PCIIOBR);
pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
SH7780_PCIIOBMR);
return 0;
}
arch/sh/drivers/pci/fixups-sdk7780.c
浏览文件 @ 62c7ae87
......@@ -35,40 +35,18 @@ int pci_fixup_pcic(struct pci_channel *chan)
{
/* Enable all interrupts, so we know what to fix */
pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM);
/* Set up standard PCI config registers */
pci_write_reg(chan, 0xFB00, SH7780_PCISTATUS);
pci_write_reg(chan, 0x0047, SH7780_PCICMD);
pci_write_reg(chan, 0x00, SH7780_PCIPIF);
pci_write_reg(chan, 0x1912, SH7780_PCISVID);
pci_write_reg(chan, 0x0001, SH7780_PCISID);
pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */
pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */
pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */
pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */
pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
pci_write_reg(chan, 0x00000000, SH7780_PCILAR1);
pci_write_reg(chan, 0x00000000, SH7780_PCILSR1);
pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
/*
* Set the MBR so PCI address is one-to-one with window,
* meaning all calls go straight through... use ifdef to
* catch erroneous assumption.
*/
pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0);
pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
/* Set IOBR for window containing area specified in pci.h */
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
SH7780_PCIIOBR);
pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18),
SH7780_PCIIOBMR);
pci_write_reg(chan, 0xA5000C01, SH7780_PCICR);
pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
return 0;
}
arch/sh/drivers/pci/pci-sh7780.c
浏览文件 @ 62c7ae87
/*
* Low-Level PCI Support for the SH7780
* Low-Level PCI Support for the SH7780
*
* Dustin McIntire (dustin@sensoria.com)
* Derived from arch/i386/kernel/pci-*.c which bore the message:
* (c) 1999--2000 Martin Mares <mj@ucw.cz>
*
* Ported to the new API by Paul Mundt <lethal@linux-sh.org>
* With cleanup by Paul van Gool <pvangool@mimotech.com>
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
* Copyright (C) 2005 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#undef DEBUG
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
......@@ -117,13 +110,8 @@ int __init pcibios_init_platform(void)
pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4;
/* set the command/status bits to:
* Wait Cycle Control + Parity Enable + Bus Master +
* Mem space enable
*/
pci_write_reg(chan, 0x00000046, SH7780_PCICMD);
/* Set IO and Mem windows to local address
/*
* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
*/
pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
......@@ -131,9 +119,33 @@ int __init pcibios_init_platform(void)
pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
/* Set up standard PCI config registers */
__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
/* Apply any last-minute PCIC fixups */
pci_fixup_pcic(chan);
pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
#ifdef CONFIG_32BIT
pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
#endif
/* Set IOBR for windows containing area specified in pci.h */
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
SH7780_PCIIOBR);
pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
SH7780_PCIIOBMR);
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
......
arch/sh/drivers/pci/pci-sh7780.h
浏览文件 @ 62c7ae87
......@@ -65,11 +65,6 @@
#define SH7780_PCIPMCSR_BSE 0x046
#define SH7780_PCICDD 0x047
#define SH7780_PCICR 0x100 /* PCI Control Register */
#define SH7780_PCILSR 0x104 /* PCI Local Space Register0 */
#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */
#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */
#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */
#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
#define SH7780_PCIAIR 0x11C /* Error Address Register */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或