提交 60b4a5ee 编写于 作者: X Xiang Chen 提交者: Martin K. Petersen

scsi: hisi_sas: add v3 cq interrupt handler

Add v3 cq interrupt handler slot_complete_v3_hw().

Note: The slot error handling needs to be further refined in the future
to examine all fields in the error record, and handle appropriately,
instead of current solution - just report SAS_OPEN_REJECT.
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
上级 54edeee1
......@@ -157,6 +157,32 @@
#define SL_RX_BCAST_CHK_MSK (PORT_BASE + 0x2c0)
#define PHYCTRL_OOB_RESTART_MSK (PORT_BASE + 0x2c4)
/* Completion header */
/* dw0 */
#define CMPLT_HDR_CMPLT_OFF 0
#define CMPLT_HDR_CMPLT_MSK (0x3 << CMPLT_HDR_CMPLT_OFF)
#define CMPLT_HDR_ERROR_PHASE_OFF 2
#define CMPLT_HDR_ERROR_PHASE_MSK (0xff << CMPLT_HDR_ERROR_PHASE_OFF)
#define CMPLT_HDR_RSPNS_XFRD_OFF 10
#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
#define CMPLT_HDR_ERX_OFF 12
#define CMPLT_HDR_ERX_MSK (0x1 << CMPLT_HDR_ERX_OFF)
#define CMPLT_HDR_ABORT_STAT_OFF 13
#define CMPLT_HDR_ABORT_STAT_MSK (0x7 << CMPLT_HDR_ABORT_STAT_OFF)
/* abort_stat */
#define STAT_IO_NOT_VALID 0x1
#define STAT_IO_NO_DEVICE 0x2
#define STAT_IO_COMPLETE 0x3
#define STAT_IO_ABORTED 0x4
/* dw1 */
#define CMPLT_HDR_IPTT_OFF 0
#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
#define CMPLT_HDR_DEV_ID_OFF 16
#define CMPLT_HDR_DEV_ID_MSK (0xffff << CMPLT_HDR_DEV_ID_OFF)
/* dw3 */
#define CMPLT_HDR_IO_IN_TARGET_OFF 17
#define CMPLT_HDR_IO_IN_TARGET_MSK (0x1 << CMPLT_HDR_IO_IN_TARGET_OFF)
struct hisi_sas_complete_v3_hdr {
__le32 dw0;
__le32 dw1;
......@@ -164,6 +190,24 @@ struct hisi_sas_complete_v3_hdr {
__le32 dw3;
};
struct hisi_sas_err_record_v3 {
/* dw0 */
__le32 trans_tx_fail_type;
/* dw1 */
__le32 trans_rx_fail_type;
/* dw2 */
__le16 dma_tx_err_type;
__le16 sipc_rx_err_type;
/* dw3 */
__le32 dma_rx_err_type;
};
#define RX_DATA_LEN_UNDERFLOW_OFF 6
#define RX_DATA_LEN_UNDERFLOW_MSK (1 << RX_DATA_LEN_UNDERFLOW_OFF)
#define HISI_SAS_COMMAND_ENTRIES_V3_HW 4096
#define HISI_SAS_MSI_COUNT_V3_HW 32
......@@ -625,11 +669,275 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
return IRQ_HANDLED;
}
static void
slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
struct hisi_sas_slot *slot)
{
struct task_status_struct *ts = &task->task_status;
struct hisi_sas_complete_v3_hdr *complete_queue =
hisi_hba->complete_hdr[slot->cmplt_queue];
struct hisi_sas_complete_v3_hdr *complete_hdr =
&complete_queue[slot->cmplt_queue_slot];
struct hisi_sas_err_record_v3 *record = slot->status_buffer;
u32 dma_rx_err_type = record->dma_rx_err_type;
u32 trans_tx_fail_type = record->trans_tx_fail_type;
switch (task->task_proto) {
case SAS_PROTOCOL_SSP:
if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
ts->residual = trans_tx_fail_type;
ts->stat = SAS_DATA_UNDERRUN;
} else if (complete_hdr->dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
ts->stat = SAS_QUEUE_FULL;
slot->abort = 1;
} else {
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
}
break;
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
ts->residual = trans_tx_fail_type;
ts->stat = SAS_DATA_UNDERRUN;
} else if (complete_hdr->dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
ts->stat = SAS_PHY_DOWN;
slot->abort = 1;
} else {
ts->stat = SAS_OPEN_REJECT;
ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
}
hisi_sas_sata_done(task, slot);
break;
case SAS_PROTOCOL_SMP:
ts->stat = SAM_STAT_CHECK_CONDITION;
break;
default:
break;
}
}
static int
slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
{
struct sas_task *task = slot->task;
struct hisi_sas_device *sas_dev;
struct device *dev = hisi_hba->dev;
struct task_status_struct *ts;
struct domain_device *device;
enum exec_status sts;
struct hisi_sas_complete_v3_hdr *complete_queue =
hisi_hba->complete_hdr[slot->cmplt_queue];
struct hisi_sas_complete_v3_hdr *complete_hdr =
&complete_queue[slot->cmplt_queue_slot];
int aborted;
unsigned long flags;
if (unlikely(!task || !task->lldd_task || !task->dev))
return -EINVAL;
ts = &task->task_status;
device = task->dev;
sas_dev = device->lldd_dev;
spin_lock_irqsave(&task->task_state_lock, flags);
aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
task->task_state_flags &=
~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
spin_unlock_irqrestore(&task->task_state_lock, flags);
memset(ts, 0, sizeof(*ts));
ts->resp = SAS_TASK_COMPLETE;
if (unlikely(aborted)) {
ts->stat = SAS_ABORTED_TASK;
hisi_sas_slot_task_free(hisi_hba, task, slot);
return -1;
}
if (unlikely(!sas_dev)) {
dev_dbg(dev, "slot complete: port has not device\n");
ts->stat = SAS_PHY_DOWN;
goto out;
}
/*
* Use SAS+TMF status codes
*/
switch ((complete_hdr->dw0 & CMPLT_HDR_ABORT_STAT_MSK)
>> CMPLT_HDR_ABORT_STAT_OFF) {
case STAT_IO_ABORTED:
/* this IO has been aborted by abort command */
ts->stat = SAS_ABORTED_TASK;
goto out;
case STAT_IO_COMPLETE:
/* internal abort command complete */
ts->stat = TMF_RESP_FUNC_SUCC;
goto out;
case STAT_IO_NO_DEVICE:
ts->stat = TMF_RESP_FUNC_COMPLETE;
goto out;
case STAT_IO_NOT_VALID:
/*
* abort single IO, the controller can't find the IO
*/
ts->stat = TMF_RESP_FUNC_FAILED;
goto out;
default:
break;
}
/* check for erroneous completion */
if ((complete_hdr->dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) {
slot_err_v3_hw(hisi_hba, task, slot);
if (unlikely(slot->abort))
return ts->stat;
goto out;
}
switch (task->task_proto) {
case SAS_PROTOCOL_SSP: {
struct ssp_response_iu *iu = slot->status_buffer +
sizeof(struct hisi_sas_err_record);
sas_ssp_task_response(dev, task, iu);
break;
}
case SAS_PROTOCOL_SMP: {
struct scatterlist *sg_resp = &task->smp_task.smp_resp;
void *to;
ts->stat = SAM_STAT_GOOD;
to = kmap_atomic(sg_page(sg_resp));
dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
DMA_FROM_DEVICE);
dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
DMA_TO_DEVICE);
memcpy(to + sg_resp->offset,
slot->status_buffer +
sizeof(struct hisi_sas_err_record),
sg_dma_len(sg_resp));
kunmap_atomic(to);
break;
}
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
ts->stat = SAM_STAT_GOOD;
hisi_sas_sata_done(task, slot);
break;
default:
ts->stat = SAM_STAT_CHECK_CONDITION;
break;
}
if (!slot->port->port_attached) {
dev_err(dev, "slot complete: port %d has removed\n",
slot->port->sas_port.id);
ts->stat = SAS_PHY_DOWN;
}
out:
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_STATE_DONE;
spin_unlock_irqrestore(&task->task_state_lock, flags);
spin_lock_irqsave(&hisi_hba->lock, flags);
hisi_sas_slot_task_free(hisi_hba, task, slot);
spin_unlock_irqrestore(&hisi_hba->lock, flags);
sts = ts->stat;
if (task->task_done)
task->task_done(task);
return sts;
}
static void cq_tasklet_v3_hw(unsigned long val)
{
struct hisi_sas_cq *cq = (struct hisi_sas_cq *)val;
struct hisi_hba *hisi_hba = cq->hisi_hba;
struct hisi_sas_slot *slot;
struct hisi_sas_itct *itct;
struct hisi_sas_complete_v3_hdr *complete_queue;
u32 rd_point = cq->rd_point, wr_point, dev_id;
int queue = cq->id;
struct hisi_sas_dq *dq = &hisi_hba->dq[queue];
complete_queue = hisi_hba->complete_hdr[queue];
spin_lock(&dq->lock);
wr_point = hisi_sas_read32(hisi_hba, COMPL_Q_0_WR_PTR +
(0x14 * queue));
while (rd_point != wr_point) {
struct hisi_sas_complete_v3_hdr *complete_hdr;
int iptt;
complete_hdr = &complete_queue[rd_point];
/* Check for NCQ completion */
if (complete_hdr->act) {
u32 act_tmp = complete_hdr->act;
int ncq_tag_count = ffs(act_tmp);
dev_id = (complete_hdr->dw1 & CMPLT_HDR_DEV_ID_MSK) >>
CMPLT_HDR_DEV_ID_OFF;
itct = &hisi_hba->itct[dev_id];
/* The NCQ tags are held in the itct header */
while (ncq_tag_count) {
__le64 *ncq_tag = &itct->qw4_15[0];
ncq_tag_count -= 1;
iptt = (ncq_tag[ncq_tag_count / 5]
>> (ncq_tag_count % 5) * 12) & 0xfff;
slot = &hisi_hba->slot_info[iptt];
slot->cmplt_queue_slot = rd_point;
slot->cmplt_queue = queue;
slot_complete_v3_hw(hisi_hba, slot);
act_tmp &= ~(1 << ncq_tag_count);
ncq_tag_count = ffs(act_tmp);
}
} else {
iptt = (complete_hdr->dw1) & CMPLT_HDR_IPTT_MSK;
slot = &hisi_hba->slot_info[iptt];
slot->cmplt_queue_slot = rd_point;
slot->cmplt_queue = queue;
slot_complete_v3_hw(hisi_hba, slot);
}
if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
rd_point = 0;
}
/* update rd_point */
cq->rd_point = rd_point;
hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
spin_unlock(&dq->lock);
}
static irqreturn_t cq_interrupt_v3_hw(int irq_no, void *p)
{
struct hisi_sas_cq *cq = p;
struct hisi_hba *hisi_hba = cq->hisi_hba;
int queue = cq->id;
hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
tasklet_schedule(&cq->tasklet);
return IRQ_HANDLED;
}
static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = hisi_hba->dev;
struct pci_dev *pdev = hisi_hba->pci_dev;
int vectors, rc;
int i, k;
int max_msi = HISI_SAS_MSI_COUNT_V3_HW;
vectors = pci_alloc_irq_vectors(hisi_hba->pci_dev, 1,
......@@ -657,9 +965,34 @@ static int interrupt_init_v3_hw(struct hisi_hba *hisi_hba)
goto free_phy_irq;
}
/* Init tasklets for cq only */
for (i = 0; i < hisi_hba->queue_count; i++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
struct tasklet_struct *t = &cq->tasklet;
rc = devm_request_irq(dev, pci_irq_vector(pdev, i+16),
cq_interrupt_v3_hw, 0,
DRV_NAME " cq", cq);
if (rc) {
dev_err(dev,
"could not request cq%d interrupt, rc=%d\n",
i, rc);
rc = -ENOENT;
goto free_cq_irqs;
}
tasklet_init(t, cq_tasklet_v3_hw, (unsigned long)cq);
}
return 0;
free_cq_irqs:
for (k = 0; k < i; k++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[k];
free_irq(pci_irq_vector(pdev, k+16), cq);
}
free_irq(pci_irq_vector(pdev, 2), hisi_hba);
free_phy_irq:
free_irq(pci_irq_vector(pdev, 1), hisi_hba);
free_irq_vectors:
......@@ -840,8 +1173,15 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
static void
hisi_sas_v3_destroy_irqs(struct pci_dev *pdev, struct hisi_hba *hisi_hba)
{
int i;
free_irq(pci_irq_vector(pdev, 1), hisi_hba);
free_irq(pci_irq_vector(pdev, 2), hisi_hba);
for (i = 0; i < hisi_hba->queue_count; i++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
free_irq(pci_irq_vector(pdev, i+16), cq);
}
pci_free_irq_vectors(pdev);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册