microblaze_v8: Makefiles for Microblaze cpu

Reviewed-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NJohn Linn <john.linn@xilinx.com>
Acked-by: NStephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: NJohn Williams <john.williams@petalogix.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

arch/microblaze/Makefile

+UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+
+# What CPU vesion are we building for, and crack it open
+# as major.minor.rev
+CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
+CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+
+export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
+
+# Use cpu-related CONFIG_ vars to set compile options.
+
+# Work out HW multipler support.  This is icky.
+# 1. Spartan2 has no HW multiplers.
+# 2. MicroBlaze v3.x always uses them, except in Spartan 2
+# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
+ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
+  ifeq ($(CPU_MAJOR),3)
+    CPUFLAGS-1 += -mno-xl-soft-mul
+  else
+    # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support.
+    CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
+    CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
+  endif
+endif
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare
+
+CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
+
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
+CFLAGS += $(CPUFLAGS-1)
+CFLAGS += $(CPUFLAGS-2)
+
+# r31 holds current when in kernel mode
+CFLAGS += -ffixed-r31
+
+LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
+
+LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+
+head-y		:= arch/microblaze/kernel/head.o
+libs-y		+= arch/microblaze/lib/ $(LIBGCC)
+core-y		+= arch/microblaze/kernel/ arch/microblaze/mm/ \
+		   arch/microblaze/platform/
+
+boot := arch/$(ARCH)/boot
+
+# defines filename extension depending memory management type
+ifeq ($(CONFIG_MMU),)
+MMUEXT		:= -nommu
+endif
+export	MMUEXT
+
+all: linux.bin
+
+archclean:
+	$(Q)$(MAKE) $(clean)=$(boot)
+
+linux.bin linux.bin.gz: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+define archhelp
+  echo  '* linux.bin    - Create raw binary'
+  echo  '  linux.bin.gz - Create compressed raw binary'
+endef

arch/microblaze/boot/Makefile

+#
+# arch/microblaze/boot/Makefile
+#
+
+targets := linux.bin linux.bin.gz
+
+OBJCOPYFLAGS_linux.bin  := -O binary
+
+$(obj)/linux.bin: vmlinux FORCE
+	$(call if_changed,objcopy)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
+	$(call if_changed,gzip)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+clean-kernel += linux.bin linux.bin.gz

arch/microblaze/kernel/Makefile

+#
+# Makefile
+#
+
+extra-y := head.o vmlinux.lds
+
+obj-y += exceptions.o \
+	hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
+	of_platform.o process.o prom.o prom_parse.o ptrace.o \
+	setup.o signal.o sys_microblaze.o timer.o traps.o
+
+obj-y += cpu/
+
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+obj-$(CONFIG_SELFMOD)		+= selfmod.o
+obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
+obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
+
+obj-y	+= entry$(MMUEXT).o

arch/microblaze/kernel/cpu/Makefile

+#
+# Build the appropriate CPU version support
+#
+
+EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
+		-DCPU_REV=$(CPU_REV)
+
+obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o

arch/microblaze/lib/Makefile

+#
+# Makefile
+#
+
+lib-y :=  memset.o checksum.o
+
+ifeq ($(CONFIG_OPT_LIB_ASM),y)
+lib-y += fastcopy.o
+else
+lib-y += memcpy.o memmove.o
+endif
+
+lib-y +=  uaccess.o

arch/microblaze/mm/Makefile

+#
+# Makefile
+#
+
+obj-y := init.o

arch/microblaze/platform/Makefile

+#
+# Makefile for arch/microblaze/platform directory
+#
+#obj-$(CONFIG_PLATFORM_GENERIC) += generic/
+
+obj-y	+= platform.o

arch/microblaze/platform/generic/Makefile

+#
+# Empty Makefile to keep make clean happy
+#