usb: gadget: mv_udc: drop ARCH dependency

This patch do the following things:
1. Change the Kconfig information.
2. Rename the driver name.
3. Don't do any type cast to io memory.
4. Add dummy stub for clk framework.
Signed-off-by: NNeil Zhang <zhangwm@marvell.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

drivers/usb/gadget/Kconfig

@@ -309,13 +309,13 @@ config USB_S3C_HSUDC
 
 	  This driver has been tested on S3C2416 and S3C2450 processors.
 
-config USB_PXA_U2O
-	tristate "PXA9xx Processor USB2.0 controller"
-	depends on ARCH_MMP
+config USB_MV_UDC
+	tristate "Marvell USB2.0 Device Controller"
 	select USB_GADGET_DUALSPEED
 	help
-	  PXA9xx Processor series include a high speed USB2.0 device
-	  controller, which support high speed and full speed USB peripheral.
+	  Marvell Socs (including PXA and MMP series) include a high speed
+	  USB2.0 OTG controller, which can be configured as high speed or
+	  full speed USB peripheral.
 
 config USB_GADGET_DWC3
 	tristate "DesignWare USB3.0 (DRD) Controller"

drivers/usb/gadget/Makefile

@@ -27,7 +27,7 @@ obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
-obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
+obj-$(CONFIG_USB_MV_UDC)	+= mv_udc.o
 mv_udc-y			:= mv_udc_core.o
 obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o

drivers/usb/gadget/mv_udc.h

@@ -180,7 +180,7 @@ struct mv_udc {
 
 	struct mv_cap_regs __iomem	*cap_regs;
 	struct mv_op_regs __iomem	*op_regs;
-	unsigned int			phy_regs;
+	void __iomem                    *phy_regs;
 	unsigned int			max_eps;
 	struct mv_dqh			*ep_dqh;
 	size_t				ep_dqh_size;

drivers/usb/gadget/mv_udc_core.c

@@ -2128,11 +2128,9 @@ static int __devexit mv_udc_remove(struct platform_device *dev)
 
 	if (udc->cap_regs)
 		iounmap(udc->cap_regs);
-	udc->cap_regs = NULL;
 
 	if (udc->phy_regs)
-		iounmap((void *)udc->phy_regs);
-	udc->phy_regs = 0;
+		iounmap(udc->phy_regs);
 
 	if (udc->status_req) {
 		kfree(udc->status_req->req.buf);
@@ -2217,8 +2215,8 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 		goto err_iounmap_capreg;
 	}
 
-	udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r));
-	if (udc->phy_regs == 0) {
+	udc->phy_regs = ioremap(r->start, resource_size(r));
+	if (udc->phy_regs == NULL) {
 		dev_err(&dev->dev, "failed to map phy I/O memory\n");
 		retval = -EBUSY;
 		goto err_iounmap_capreg;
@@ -2229,7 +2227,8 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 	if (retval)
 		goto err_iounmap_phyreg;
 
-	udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs
+	udc->op_regs =
+		(struct mv_op_regs __iomem *)((unsigned long)udc->cap_regs
 		+ (readl(&udc->cap_regs->caplength_hciversion)
 			& CAPLENGTH_MASK));
 	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
@@ -2389,7 +2388,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 err_disable_clock:
 	mv_udc_disable_internal(udc);
 err_iounmap_phyreg:
-	iounmap((void *)udc->phy_regs);
+	iounmap(udc->phy_regs);
 err_iounmap_capreg:
 	iounmap(udc->cap_regs);
 err_put_clk:
@@ -2480,13 +2479,13 @@ static struct platform_driver udc_driver = {
 	.shutdown	= mv_udc_shutdown,
 	.driver		= {
 		.owner	= THIS_MODULE,
-		.name	= "pxa-u2o",
+		.name	= "mv-udc",
 #ifdef CONFIG_PM
 		.pm	= &mv_udc_pm_ops,
 #endif
 	},
 };
-MODULE_ALIAS("platform:pxa-u2o");
+MODULE_ALIAS("platform:mv-udc");
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");

include/linux/platform_data/mv_usb.h

@@ -42,9 +42,17 @@ struct mv_usb_platform_data {
 	/* only valid for HCD. OTG or Host only*/
 	unsigned int		mode;
 
-	int     (*phy_init)(unsigned int regbase);
-	void    (*phy_deinit)(unsigned int regbase);
+	int	(*phy_init)(void __iomem *regbase);
+	void	(*phy_deinit)(void __iomem *regbase);
 	int	(*set_vbus)(unsigned int vbus);
 };
 
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id)       NULL
+#define clk_put(clock)         do {} while (0)
+#define clk_enable(clock)      do {} while (0)
+#define clk_disable(clock)     do {} while (0)
+#endif
+
 #endif