提交 5b9eda33 编写于 作者: A Aaro Koskinen 提交者: Dan Williams

iop3xx: ATU and PCI memory configuration corrected

There are two 64 MB outbound memory windows at bus addresses
0x80000000..0x83ffffff and 0x84000000..0x87ffffff for PCI
memory. Currently, on iop32x, only the lower window is available for
allocations, limiting the available space to 64 MB. On iop33x the full
128 MB can be allocated, but the translation value is wrong for the
upper window.

The patch enables the full 128 MB space on iop32x and corrects the
initialization of OMWTVR1. Redundant definitions are deleted. Tested
using a Thecus N2100 board with a graphics adapter in the expansion
slot. Both windows are in use:

  00:05.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics
  Innovation) Volari Z7 (prog-if 00 [VGA controller])
  [...]
	Region 0: Memory at 80000000 (32-bit, prefetchable) [size=64M]
	Region 1: Memory at 84080000 (32-bit, non-prefetchable) [size=256K]
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
上级 9e2a7e6f
......@@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
* IOP3XX I/O and Mem space regions for PCI autoconfiguration
*/
#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
......
......@@ -31,7 +31,5 @@
#define IOP32X_MAX_RAM_SIZE 0x40000000UL
#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE
#endif
......@@ -36,8 +36,6 @@
#define IOP33X_MAX_RAM_SIZE 0x80000000UL
#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000
#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE
#endif
......@@ -257,7 +257,8 @@ void __init iop3xx_atu_setup(void)
*IOP3XX_OUMWTVR0 = 0;
/* Outbound window 1 */
*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
*IOP3XX_OUMWTVR1 = 0;
/* BAR 3 ( Disabled ) */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册