ARM: pxa/cm-x300: GPIO cleanup

use gpio_request_<one|array>() instead of multiple gpiolib calls
Signed-off-by: NIgor Grinberg <grinberg@compulab.co.il>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

arch/arm/mach-pxa/cm-x300.c

@@ -484,14 +484,14 @@ static int cm_x300_ulpi_phy_reset(void)
 	int err;
 
 	/* reset the PHY */
-	err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset");
+	err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW,
+			       "ulpi reset");
 	if (err) {
 		pr_err("%s: failed to request ULPI reset GPIO: %d\n",
 		       __func__, err);
 		return err;
 	}
 
-	gpio_direction_output(GPIO_ULPI_PHY_RST, 0);
 	msleep(10);
 	gpio_set_value(GPIO_ULPI_PHY_RST, 1);
 	msleep(10);
@@ -768,39 +768,36 @@ static void __init cm_x300_init_da9030(void)
 	irq_set_irq_wake(IRQ_WAKEUP0, 1);
 }
 
+/* wi2wi gpio setting for system_rev >= 130 */
+static struct gpio cm_x300_wi2wi_gpios[] __initdata = {
+	{ 71, GPIOF_OUT_INIT_HIGH, "wlan en" },
+	{ 70, GPIOF_OUT_INIT_HIGH, "bt reset" },
+};
+
 static void __init cm_x300_init_wi2wi(void)
 {
 	int bt_reset, wlan_en;
 	int err;
 
 	if (system_rev < 130) {
-		wlan_en = 77;
-		bt_reset = 78;
-	} else {
-		wlan_en = 71;
-		bt_reset = 70;
+		cm_x300_wi2wi_gpios[0].gpio = 77;	/* wlan en */
+		cm_x300_wi2wi_gpios[1].gpio = 78;	/* bt reset */
 	}
 
 	/* Libertas and CSR reset */
-	err = gpio_request(wlan_en, "wlan en");
+	err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios));
 	if (err) {
-		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
-	} else {
-		gpio_direction_output(wlan_en, 1);
-		gpio_free(wlan_en);
+		pr_err("CM-X300: failed to request wifi/bt gpios: %d\n", err);
+		return;
 	}
 
-	err = gpio_request(bt_reset, "bt reset");
-	if (err) {
-		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
-	} else {
-		gpio_direction_output(bt_reset, 1);
-		udelay(10);
-		gpio_set_value(bt_reset, 0);
-		udelay(10);
-		gpio_set_value(bt_reset, 1);
-		gpio_free(bt_reset);
-	}
+	udelay(10);
+	gpio_set_value(bt_reset, 0);
+	udelay(10);
+	gpio_set_value(bt_reset, 1);
+
+	gpio_free(wlan_en);
+	gpio_free(bt_reset);
 }
 
 /* MFP */