提交 59ca2ce1 编写于 作者: A Antti Palosaari 提交者: Mauro Carvalho Chehab

[media] tda10071: remove legacy media attach

All users are now using I2C binding and old attach could be removed.
Use I2C client for proper logging at the same.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
上级 3250a550
......@@ -21,12 +21,11 @@
#ifndef TDA10071_H
#define TDA10071_H
#include <linux/kconfig.h>
#include <linux/dvb/frontend.h>
/*
* I2C address
* 0x55,
* 0x05, 0x55,
*/
/**
......@@ -53,64 +52,4 @@ struct tda10071_platform_data {
struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
};
struct tda10071_config {
/* Demodulator I2C address.
* Default: none, must set
* Values: 0x55,
*/
u8 demod_i2c_addr;
/* Tuner I2C address.
* Default: none, must set
* Values: 0x14, 0x54, ...
*/
u8 tuner_i2c_addr;
/* Max bytes I2C provider can write at once.
* Note: Buffer is taken from the stack currently!
* Default: none, must set
* Values:
*/
u16 i2c_wr_max;
/* TS output mode.
* Default: TDA10071_TS_SERIAL
* Values:
*/
#define TDA10071_TS_SERIAL 0
#define TDA10071_TS_PARALLEL 1
u8 ts_mode;
/* Input spectrum inversion.
* Default: 0
* Values: 0, 1
*/
bool spec_inv;
/* Xtal frequency Hz
* Default: none, must set
* Values:
*/
u32 xtal;
/* PLL multiplier.
* Default: none, must set
* Values:
*/
u8 pll_multiplier;
};
#if IS_REACHABLE(CONFIG_DVB_TDA10071)
extern struct dvb_frontend *tda10071_attach(
const struct tda10071_config *config, struct i2c_adapter *i2c);
#else
static inline struct dvb_frontend *tda10071_attach(
const struct tda10071_config *config, struct i2c_adapter *i2c)
{
dev_warn(&i2c->dev, "%s: driver disabled by Kconfig\n", __func__);
return NULL;
}
#endif
#endif /* TDA10071_H */
......@@ -26,10 +26,14 @@
#include <linux/firmware.h>
struct tda10071_priv {
struct i2c_adapter *i2c;
struct dvb_frontend fe;
struct i2c_client *client;
struct tda10071_config cfg;
u32 clk;
u16 i2c_wr_max;
u8 ts_mode;
bool spec_inv;
u8 pll_multiplier;
u8 tuner_i2c_addr;
u8 meas_count[2];
u32 ber;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册