[SCSI] cxgb3i: zero out reserved or un-used fields.

Zero out the reserved or un-used CPL message fields to prevent any garbage
value.
Signed-off-by: NKaren Xie <kxie@chelsio.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

drivers/scsi/cxgb3i/cxgb3i_ddp.c

@@ -499,6 +499,7 @@ static int setup_conn_pgidx(struct t3cdev *tdev, unsigned int tid, int pg_idx,
 	/* set up ulp submode and page size */
 	req = (struct cpl_set_tcb_field *)skb_put(skb, sizeof(*req));
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+	req->wr.wr_lo = 0;
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
 	req->reply = V_NO_REPLY(reply ? 0 : 1);
 	req->cpu_idx = 0;
@@ -564,6 +565,7 @@ int cxgb3i_setup_conn_digest(struct t3cdev *tdev, unsigned int tid,
 	/* set up ulp submode and page size */
 	req = (struct cpl_set_tcb_field *)skb_put(skb, sizeof(*req));
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+	req->wr.wr_lo = 0;
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
 	req->reply = V_NO_REPLY(reply ? 0 : 1);
 	req->cpu_idx = 0;

drivers/scsi/cxgb3i/cxgb3i_offload.c

@@ -264,6 +264,7 @@ static void make_act_open_req(struct s3_conn *c3cn, struct sk_buff *skb,
 	skb->priority = CPL_PRIORITY_SETUP;
 	req = (struct cpl_act_open_req *)__skb_put(skb, sizeof(*req));
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+	req->wr.wr_lo = 0;
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ACT_OPEN_REQ, atid));
 	req->local_port = c3cn->saddr.sin_port;
 	req->peer_port = c3cn->daddr.sin_port;
@@ -273,6 +274,7 @@ static void make_act_open_req(struct s3_conn *c3cn, struct sk_buff *skb,
 			   V_TX_CHANNEL(e->smt_idx));
 	req->opt0l = htonl(calc_opt0l(c3cn));
 	req->params = 0;
+	req->opt2 = 0;
 }
 
 static void fail_act_open(struct s3_conn *c3cn, int errno)
@@ -379,6 +381,7 @@ static void send_abort_req(struct s3_conn *c3cn)
 
 	c3cn->cpl_abort_req = NULL;
 	req = (struct cpl_abort_req *)skb->head;
+	memset(req, 0, sizeof(*req));
 
 	skb->priority = CPL_PRIORITY_DATA;
 	set_arp_failure_handler(skb, abort_arp_failure);
@@ -406,6 +409,7 @@ static void send_abort_rpl(struct s3_conn *c3cn, int rst_status)
 	c3cn->cpl_abort_rpl = NULL;
 
 	skb->priority = CPL_PRIORITY_DATA;
+	memset(rpl, 0, sizeof(*rpl));
 	rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL));
 	rpl->wr.wr_lo = htonl(V_WR_TID(c3cn->tid));
 	OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, c3cn->tid));
@@ -430,6 +434,7 @@ static u32 send_rx_credits(struct s3_conn *c3cn, u32 credits, u32 dack)
 
 	req = (struct cpl_rx_data_ack *)__skb_put(skb, sizeof(*req));
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+	req->wr.wr_lo = 0;
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, c3cn->tid));
 	req->credit_dack = htonl(dack | V_RX_CREDITS(credits));
 	skb->priority = CPL_PRIORITY_ACK;