提交 58febc0b 编写于 作者: D David Brownell 提交者: Haavard Skinnemoen

[AVR32] ext int fixes

Bugfixes for external irq handler set_irq_type():

 - If set_irq_type() can't set the type, don't change anything!

 - It's not OK to change the flow handler as part of set_irq_type(),
   among other issues that violates spinlock rules.  Instead, we can
   call the relevant handler when we demux the external interrupts.

 - The external irq demux has no need to grab the spinlock.  And in
   fact grabbing it that way was wrong, since that code might be
   pre-empted by an irq at a different priority level, and that code
   might then have tried to grab that spinlock...
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
上级 a3d912c8
......@@ -55,20 +55,11 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
unsigned long flags;
int ret = 0;
flow_type &= IRQ_TYPE_SENSE_MASK;
if (flow_type == IRQ_TYPE_NONE)
flow_type = IRQ_TYPE_LEVEL_LOW;
desc = &irq_desc[irq];
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) {
desc->status |= IRQ_LEVEL;
set_irq_handler(irq, handle_level_irq);
} else {
set_irq_handler(irq, handle_edge_irq);
}
spin_lock_irqsave(&sm->lock, flags);
mode = sm_readl(sm, EIM_MODE);
......@@ -97,9 +88,16 @@ static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
break;
}
sm_writel(sm, EIM_MODE, mode);
sm_writel(sm, EIM_EDGE, edge);
sm_writel(sm, EIM_LEVEL, level);
if (ret == 0) {
sm_writel(sm, EIM_MODE, mode);
sm_writel(sm, EIM_EDGE, edge);
sm_writel(sm, EIM_LEVEL, level);
if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
flow_type |= IRQ_LEVEL;
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type;
}
spin_unlock_irqrestore(&sm->lock, flags);
......@@ -122,8 +120,6 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
unsigned long status, pending;
unsigned int i, ext_irq;
spin_lock(&sm->lock);
status = sm_readl(sm, EIM_ISR);
pending = status & sm_readl(sm, EIM_IMR);
......@@ -133,10 +129,11 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
ext_irq = i + sm->eim_first_irq;
ext_desc = irq_desc + ext_irq;
ext_desc->handle_irq(ext_irq, ext_desc);
if (ext_desc->status & IRQ_LEVEL)
handle_level_irq(ext_irq, ext_desc);
else
handle_edge_irq(ext_irq, ext_desc);
}
spin_unlock(&sm->lock);
}
static int __init eim_init(void)
......@@ -168,8 +165,9 @@ static int __init eim_init(void)
sm->eim_chip = &eim_chip;
for (i = 0; i < nr_irqs; i++) {
/* NOTE the handler we set here is ignored by the demux */
set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
handle_edge_irq);
handle_level_irq);
set_irq_chip_data(sm->eim_first_irq + i, sm);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册