mtd: spi-nor: unify read opcode variants with ST SPI FSM

serial_flash_cmds.h defines our opcodes a little differently. Let's
borrow its naming, since it's borrowed from the SFDP standard, and it's
more extensible.

This prepares us for merging serial_flash_cmds.h and spi-nor.h opcode
listing.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NHuang Shijie <b32955@freescale.com>

drivers/mtd/spi-nor/fsl-quadspi.c

@@ -294,12 +294,12 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 	lut_base = SEQID_QUAD_READ * 4;
 
 	if (q->nor_size <= SZ_16M) {
-		cmd = SPINOR_OP_QUAD_READ;
+		cmd = SPINOR_OP_READ_1_1_4;
 		addrlen = ADDR24BIT;
 		dummy = 8;
 	} else {
 		/* use the 4-byte address */
-		cmd = SPINOR_OP_QUAD_READ;
+		cmd = SPINOR_OP_READ_1_1_4;
 		addrlen = ADDR32BIT;
 		dummy = 8;
 	}
@@ -388,7 +388,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
 {
 	switch (cmd) {
-	case SPINOR_OP_QUAD_READ:
+	case SPINOR_OP_READ_1_1_4:
 		return SEQID_QUAD_READ;
 	case SPINOR_OP_WREN:
 		return SEQID_WREN;

drivers/mtd/spi-nor/spi-nor.c

@@ -1014,16 +1014,16 @@ int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
 	/* Default commands */
 	switch (nor->flash_read) {
 	case SPI_NOR_QUAD:
-		nor->read_opcode = SPINOR_OP_QUAD_READ;
+		nor->read_opcode = SPINOR_OP_READ_1_1_4;
 		break;
 	case SPI_NOR_DUAL:
-		nor->read_opcode = SPINOR_OP_DUAL_READ;
+		nor->read_opcode = SPINOR_OP_READ_1_1_2;
 		break;
 	case SPI_NOR_FAST:
-		nor->read_opcode = SPINOR_OP_FAST_READ;
+		nor->read_opcode = SPINOR_OP_READ_FAST;
 		break;
 	case SPI_NOR_NORMAL:
-		nor->read_opcode = SPINOR_OP_NORM_READ;
+		nor->read_opcode = SPINOR_OP_READ;
 		break;
 	default:
 		dev_err(dev, "No Read opcode defined\n");
@@ -1041,16 +1041,16 @@ int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
 			/* Dedicated 4-byte command set */
 			switch (nor->flash_read) {
 			case SPI_NOR_QUAD:
-				nor->read_opcode = SPINOR_OP_QUAD_READ_4B;
+				nor->read_opcode = SPINOR_OP_READ4_1_1_4;
 				break;
 			case SPI_NOR_DUAL:
-				nor->read_opcode = SPINOR_OP_DUAL_READ_4B;
+				nor->read_opcode = SPINOR_OP_READ4_1_1_2;
 				break;
 			case SPI_NOR_FAST:
-				nor->read_opcode = SPINOR_OP_FAST_READ_4B;
+				nor->read_opcode = SPINOR_OP_READ4_FAST;
 				break;
 			case SPI_NOR_NORMAL:
-				nor->read_opcode = SPINOR_OP_NORM_READ_4B;
+				nor->read_opcode = SPINOR_OP_READ4;
 				break;
 			}
 			nor->program_opcode = SPINOR_OP_PP_4B;

include/linux/mtd/spi-nor.h

@@ -10,14 +10,22 @@
 #ifndef __LINUX_MTD_SPI_NOR_H
 #define __LINUX_MTD_SPI_NOR_H
 
+/*
+ * Note on opcode nomenclature: some opcodes have a format like
+ * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number
+ * of I/O lines used for the opcode, address, and data (respectively). The
+ * FUNCTION has an optional suffix of '4', to represent an opcode which
+ * requires a 4-byte (32-bit) address.
+ */
+
 /* Flash opcodes. */
 #define SPINOR_OP_WREN		0x06	/* Write enable */
 #define SPINOR_OP_RDSR		0x05	/* Read status register */
 #define SPINOR_OP_WRSR		0x01	/* Write status register 1 byte */
-#define SPINOR_OP_NORM_READ	0x03	/* Read data bytes (low frequency) */
-#define SPINOR_OP_FAST_READ	0x0b	/* Read data bytes (high frequency) */
-#define SPINOR_OP_DUAL_READ	0x3b	/* Read data bytes (Dual SPI) */
-#define SPINOR_OP_QUAD_READ	0x6b	/* Read data bytes (Quad SPI) */
+#define SPINOR_OP_READ		0x03	/* Read data bytes (low frequency) */
+#define SPINOR_OP_READ_FAST	0x0b	/* Read data bytes (high frequency) */
+#define SPINOR_OP_READ_1_1_2	0x3b	/* Read data bytes (Dual SPI) */
+#define SPINOR_OP_READ_1_1_4	0x6b	/* Read data bytes (Quad SPI) */
 #define SPINOR_OP_PP		0x02	/* Page program (up to 256 bytes) */
 #define SPINOR_OP_BE_4K		0x20	/* Erase 4KiB block */
 #define SPINOR_OP_BE_4K_PMC	0xd7	/* Erase 4KiB block on PMC chips */
@@ -28,10 +36,10 @@
 #define SPINOR_OP_RDCR		0x35	/* Read configuration register */
 
 /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */
-#define SPINOR_OP_NORM_READ_4B	0x13	/* Read data bytes (low frequency) */
-#define SPINOR_OP_FAST_READ_4B	0x0c	/* Read data bytes (high frequency) */
-#define SPINOR_OP_DUAL_READ_4B	0x3c	/* Read data bytes (Dual SPI) */
-#define SPINOR_OP_QUAD_READ_4B	0x6c	/* Read data bytes (Quad SPI) */
+#define SPINOR_OP_READ4		0x13	/* Read data bytes (low frequency) */
+#define SPINOR_OP_READ4_FAST	0x0c	/* Read data bytes (high frequency) */
+#define SPINOR_OP_READ4_1_1_2	0x3c	/* Read data bytes (Dual SPI) */
+#define SPINOR_OP_READ4_1_1_4	0x6c	/* Read data bytes (Quad SPI) */
 #define SPINOR_OP_PP_4B		0x12	/* Page program (up to 256 bytes) */
 #define SPINOR_OP_SE_4B		0xdc	/* Sector erase (usually 64KiB) */