提交 586e3cfb 编写于 作者: L Lendacky, Thomas 提交者: David S. Miller

amd-xgbe: Prepare for priority-based FIFO allocation

Currently, the Rx and Tx fifos are evenly allocated between the hardware
queues of the device.  As more queues are instantiated, the fifo memory
needs to be able to be allocated based on queue priority. This allows for
higher priority queues to have more fifo memory than lower priority
queues. Prepare for this by modifying the current fifo calculation to
assign the fifo queue allocation in an array that is then used to program
the hardware.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d9682c90
......@@ -2000,19 +2000,37 @@ static void xgbe_config_mtl_mode(struct xgbe_prv_data *pdata)
XGMAC_IOWRITE_BITS(pdata, MTL_OMR, RAA, MTL_RAA_SP);
}
static unsigned int xgbe_calculate_per_queue_fifo(unsigned int fifo_size,
unsigned int queue_count)
static unsigned int xgbe_get_tx_fifo_size(struct xgbe_prv_data *pdata)
{
unsigned int q_fifo_size;
unsigned int p_fifo;
unsigned int fifo_size;
/* Calculate the configured fifo size */
q_fifo_size = 1 << (fifo_size + 7);
fifo_size = 1 << (pdata->hw_feat.tx_fifo_size + 7);
/* The configured value may not be the actual amount of fifo RAM */
q_fifo_size = min_t(unsigned int, XGBE_FIFO_MAX, q_fifo_size);
return min_t(unsigned int, XGMAC_FIFO_TX_MAX, fifo_size);
}
static unsigned int xgbe_get_rx_fifo_size(struct xgbe_prv_data *pdata)
{
unsigned int fifo_size;
q_fifo_size = q_fifo_size / queue_count;
/* Calculate the configured fifo size */
fifo_size = 1 << (pdata->hw_feat.rx_fifo_size + 7);
/* The configured value may not be the actual amount of fifo RAM */
return min_t(unsigned int, XGMAC_FIFO_RX_MAX, fifo_size);
}
static void xgbe_calculate_equal_fifo(unsigned int fifo_size,
unsigned int queue_count,
unsigned int *fifo)
{
unsigned int q_fifo_size;
unsigned int p_fifo;
unsigned int i;
q_fifo_size = fifo_size / queue_count;
/* Each increment in the queue fifo size represents 256 bytes of
* fifo, with 0 representing 256 bytes. Distribute the fifo equally
......@@ -2022,39 +2040,44 @@ static unsigned int xgbe_calculate_per_queue_fifo(unsigned int fifo_size,
if (p_fifo)
p_fifo--;
return p_fifo;
for (i = 0; i < queue_count; i++)
fifo[i] = p_fifo;
}
static void xgbe_config_tx_fifo_size(struct xgbe_prv_data *pdata)
{
unsigned int fifo_size;
unsigned int fifo[XGBE_MAX_QUEUES];
unsigned int i;
fifo_size = xgbe_calculate_per_queue_fifo(pdata->hw_feat.tx_fifo_size,
pdata->tx_q_count);
fifo_size = xgbe_get_tx_fifo_size(pdata);
xgbe_calculate_equal_fifo(fifo_size, pdata->tx_q_count, fifo);
for (i = 0; i < pdata->tx_q_count; i++)
XGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_TQOMR, TQS, fifo_size);
XGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_TQOMR, TQS, fifo[i]);
netif_info(pdata, drv, pdata->netdev,
"%d Tx hardware queues, %d byte fifo per queue\n",
pdata->tx_q_count, ((fifo_size + 1) * 256));
pdata->tx_q_count, ((fifo[0] + 1) * 256));
}
static void xgbe_config_rx_fifo_size(struct xgbe_prv_data *pdata)
{
unsigned int fifo_size;
unsigned int fifo[XGBE_MAX_QUEUES];
unsigned int i;
fifo_size = xgbe_calculate_per_queue_fifo(pdata->hw_feat.rx_fifo_size,
pdata->rx_q_count);
fifo_size = xgbe_get_rx_fifo_size(pdata);
xgbe_calculate_equal_fifo(fifo_size, pdata->rx_q_count, fifo);
for (i = 0; i < pdata->rx_q_count; i++)
XGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_RQOMR, RQS, fifo_size);
XGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_RQOMR, RQS, fifo[i]);
netif_info(pdata, drv, pdata->netdev,
"%d Rx hardware queues, %d byte fifo per queue\n",
pdata->rx_q_count, ((fifo_size + 1) * 256));
pdata->rx_q_count, ((fifo[0] + 1) * 256));
}
static void xgbe_config_queue_mapping(struct xgbe_prv_data *pdata)
......
......@@ -208,7 +208,8 @@
#define XGMAC_DRIVER_CONTEXT 1
#define XGMAC_IOCTL_CONTEXT 2
#define XGBE_FIFO_MAX 81920
#define XGMAC_FIFO_RX_MAX 81920
#define XGMAC_FIFO_TX_MAX 81920
#define XGBE_TC_MIN_QUANTUM 10
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册