Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 5756ee99 编写于 作者: A Alan Cox 提交者： Linus Torvalds
浏览文件
操作

8250_pci: coding style 

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 3b0fd36d
隐藏空白更改
内联 并排
Showing with 54 addition and 55 deletion
drivers/serial/8250_pci.c
浏览文件 @ 5756ee99
...@@ -140,7 +140,7 @@ afavlab_setup(struct serial_private *priv, struct pciserial_board *board, ...@@ -140,7 +140,7 @@ afavlab_setup(struct serial_private *priv, struct pciserial_board *board,
struct uart_port *port, int idx) struct uart_port *port, int idx)
{ {
unsigned int bar, offset = board->first_offset; unsigned int bar, offset = board->first_offset;
bar = FL_GET_BASE(board->flags); bar = FL_GET_BASE(board->flags);
if (idx < 4) if (idx < 4)
bar += idx; bar += idx;
...@@ -227,8 +227,8 @@ static int pci_inteli960ni_init(struct pci_dev *dev) ...@@ -227,8 +227,8 @@ static int pci_inteli960ni_init(struct pci_dev *dev)
return -ENODEV; return -ENODEV;
/* is firmware started? */ /* is firmware started? */
pci_read_config_dword(dev, 0x44, (void*) &oldval); pci_read_config_dword(dev, 0x44, (void *)&oldval);
if (oldval == 0x00001000L) { /* RESET value */ if (oldval == 0x00001000L) { /* RESET value */
printk(KERN_DEBUG "Local i960 firmware missing"); printk(KERN_DEBUG "Local i960 firmware missing");
return -ENODEV; return -ENODEV;
} }
...@@ -253,11 +253,11 @@ static int pci_plx9050_init(struct pci_dev *dev) ...@@ -253,11 +253,11 @@ static int pci_plx9050_init(struct pci_dev *dev)
irq_config = 0x41; irq_config = 0x41;
if (dev->vendor == PCI_VENDOR_ID_PANACOM || if (dev->vendor == PCI_VENDOR_ID_PANACOM ||
dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) { dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS)
irq_config = 0x43; irq_config = 0x43;
}
if ((dev->vendor == PCI_VENDOR_ID_PLX) && if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
(dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { (dev->device == PCI_DEVICE_ID_PLX_ROMULUS))
/* /*
* As the megawolf cards have the int pins active * As the megawolf cards have the int pins active
* high, and have 2 UART chips, both ints must be * high, and have 2 UART chips, both ints must be
...@@ -267,8 +267,6 @@ static int pci_plx9050_init(struct pci_dev *dev) ...@@ -267,8 +267,6 @@ static int pci_plx9050_init(struct pci_dev *dev)
* deep FIFOs * deep FIFOs
*/ */
irq_config = 0x5b; irq_config = 0x5b;
}
/* /*
* enable/disable interrupts * enable/disable interrupts
*/ */
...@@ -343,14 +341,14 @@ static int sbs_init(struct pci_dev *dev) ...@@ -343,14 +341,14 @@ static int sbs_init(struct pci_dev *dev)
{ {
u8 __iomem *p; u8 __iomem *p;
p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
if (p == NULL) if (p == NULL)
return -ENOMEM; return -ENOMEM;
/* Set bit-4 Control Register (UART RESET) in to reset the uarts */ /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
writeb(0x10,p + OCT_REG_CR_OFF); writeb(0x10, p + OCT_REG_CR_OFF);
udelay(50); udelay(50);
writeb(0x0,p + OCT_REG_CR_OFF); writeb(0x0, p + OCT_REG_CR_OFF);
/* Set bit-2 (INTENABLE) of Control Register */ /* Set bit-2 (INTENABLE) of Control Register */
writeb(0x4, p + OCT_REG_CR_OFF); writeb(0x4, p + OCT_REG_CR_OFF);
...@@ -367,10 +365,10 @@ static void __devexit sbs_exit(struct pci_dev *dev) ...@@ -367,10 +365,10 @@ static void __devexit sbs_exit(struct pci_dev *dev)
{ {
u8 __iomem *p; u8 __iomem *p;
p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); p = ioremap(pci_resource_start(dev, 0), pci_resource_len(dev, 0));
if (p != NULL) { /* FIXME: What if resource_len < OCT_REG_CR_OFF */
if (p != NULL)
writeb(0, p + OCT_REG_CR_OFF); writeb(0, p + OCT_REG_CR_OFF);
}
iounmap(p); iounmap(p);
} }
...@@ -386,7 +384,7 @@ static void __devexit sbs_exit(struct pci_dev *dev) ...@@ -386,7 +384,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
* with other OSes (like M$ DOS). * with other OSes (like M$ DOS).
* *
* SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999 * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
* *
* There is two family of SIIG serial cards with different PCI * There is two family of SIIG serial cards with different PCI
* interface chip and different configuration methods: * interface chip and different configuration methods:
* - 10x cards have control registers in IO and/or memory space; * - 10x cards have control registers in IO and/or memory space;
...@@ -489,21 +487,21 @@ static const unsigned short timedia_single_port[] = { ...@@ -489,21 +487,21 @@ static const unsigned short timedia_single_port[] = {
static const unsigned short timedia_dual_port[] = { static const unsigned short timedia_dual_port[] = {
0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
0xD079, 0 0xD079, 0
}; };
static const unsigned short timedia_quad_port[] = { static const unsigned short timedia_quad_port[] = {
0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
0xB157, 0 0xB157, 0
}; };
static const unsigned short timedia_eight_port[] = { static const unsigned short timedia_eight_port[] = {
0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
}; };
...@@ -656,7 +654,8 @@ static int pci_ite887x_init(struct pci_dev *dev) ...@@ -656,7 +654,8 @@ static int pci_ite887x_init(struct pci_dev *dev)
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED | ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]); ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
/* write INTCBAR - ioport */ /* write INTCBAR - ioport */
pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]); pci_write_config_dword(dev, ITE_887x_INTCBAR,
inta_addr[i]);
ret = inb(inta_addr[i]); ret = inb(inta_addr[i]);
if (ret != 0xff) { if (ret != 0xff) {
/* ioport connected */ /* ioport connected */
...@@ -755,7 +754,7 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board, ...@@ -755,7 +754,7 @@ pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
return 1; return 1;
return setup_port(priv, port, bar, offset, board->reg_shift); return setup_port(priv, port, bar, offset, board->reg_shift);
} }
...@@ -843,7 +842,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { ...@@ -843,7 +842,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.init = pci_plx9050_init, .init = pci_plx9050_init,
.setup = pci_default_setup, .setup = pci_default_setup,
.exit = __devexit_p(pci_plx9050_exit), .exit = __devexit_p(pci_plx9050_exit),
}, },
{ {
.vendor = PCI_VENDOR_ID_PANACOM, .vendor = PCI_VENDOR_ID_PANACOM,
.device = PCI_DEVICE_ID_PANACOM_DUALMODEM, .device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
...@@ -1032,7 +1031,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) ...@@ -1032,7 +1031,7 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
quirk_id_matches(quirk->device, dev->device) && quirk_id_matches(quirk->device, dev->device) &&
quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
quirk_id_matches(quirk->subdevice, dev->subsystem_device)) quirk_id_matches(quirk->subdevice, dev->subsystem_device))
break; break;
return quirk; return quirk;
} }
...@@ -1711,7 +1710,7 @@ static struct pciserial_board pci_boards[] __devinitdata = { ...@@ -1711,7 +1710,7 @@ static struct pciserial_board pci_boards[] __devinitdata = {
}; };
static const struct pci_device_id softmodem_blacklist[] = { static const struct pci_device_id softmodem_blacklist[] = {
{ PCI_VDEVICE ( AL, 0x5457 ), }, /* ALi Corporation M5457 AC'97 Modem */ { PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
}; };
/* /*
...@@ -1724,13 +1723,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) ...@@ -1724,13 +1723,13 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board)
{ {
const struct pci_device_id *blacklist; const struct pci_device_id *blacklist;
int num_iomem, num_port, first_port = -1, i; int num_iomem, num_port, first_port = -1, i;
/* /*
* If it is not a communications device or the programming * If it is not a communications device or the programming
* interface is greater than 6, give up. * interface is greater than 6, give up.
* *
* (Should we try to make guesses for multiport serial devices * (Should we try to make guesses for multiport serial devices
* later?) * later?)
*/ */
if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
...@@ -1863,25 +1862,23 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) ...@@ -1863,25 +1862,23 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board)
break; break;
#ifdef SERIAL_DEBUG_PCI #ifdef SERIAL_DEBUG_PCI
printk("Setup PCI port: port %x, irq %d, type %d\n", printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
serial_port.iobase, serial_port.irq, serial_port.iotype); serial_port.iobase, serial_port.irq, serial_port.iotype);
#endif #endif
priv->line[i] = serial8250_register_port(&serial_port); priv->line[i] = serial8250_register_port(&serial_port);
if (priv->line[i] < 0) { if (priv->line[i] < 0) {
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
break; break;
} }
} }
priv->nr = i; priv->nr = i;
return priv; return priv;
err_deinit: err_deinit:
if (quirk->exit) if (quirk->exit)
quirk->exit(dev); quirk->exit(dev);
err_out: err_out:
return priv; return priv;
} }
EXPORT_SYMBOL_GPL(pciserial_init_ports); EXPORT_SYMBOL_GPL(pciserial_init_ports);
...@@ -2171,22 +2168,22 @@ static struct pci_device_id serial_pci_tbl[] = { ...@@ -2171,22 +2168,22 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_b0_8_1843200_200 }, pbn_b0_8_1843200_200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_1_115200 }, pbn_b2_bt_1_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 }, pbn_b2_bt_2_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_115200 }, pbn_b2_bt_4_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_2_115200 }, pbn_b2_bt_2_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_bt_4_115200 }, pbn_b2_bt_4_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_115200 }, pbn_b2_8_115200 },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
...@@ -2201,11 +2198,11 @@ static struct pci_device_id serial_pci_tbl[] = { ...@@ -2201,11 +2198,11 @@ static struct pci_device_id serial_pci_tbl[] = {
/* /*
* VScom SPCOM800, from sl@s.pl * VScom SPCOM800, from sl@s.pl
*/ */
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_8_921600 }, pbn_b2_8_921600 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b2_4_921600 }, pbn_b2_4_921600 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN, PCI_SUBVENDOR_ID_KEYSPAN,
...@@ -2223,27 +2220,27 @@ static struct pci_device_id serial_pci_tbl[] = { ...@@ -2223,27 +2220,27 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_b2_4_115200 }, pbn_b2_4_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST, PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
pbn_b2_4_460800 }, pbn_b2_4_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST, PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
pbn_b2_8_460800 }, pbn_b2_8_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST, PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
pbn_b2_16_460800 }, pbn_b2_16_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIFAST, PCI_SUBVENDOR_ID_CHASE_PCIFAST,
PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
pbn_b2_16_460800 }, pbn_b2_16_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIRAS, PCI_SUBVENDOR_ID_CHASE_PCIRAS,
PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
pbn_b2_4_460800 }, pbn_b2_4_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_CHASE_PCIRAS, PCI_SUBVENDOR_ID_CHASE_PCIRAS,
PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
pbn_b2_8_460800 }, pbn_b2_8_460800 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_EXSYS, PCI_SUBVENDOR_ID_EXSYS,
...@@ -2269,10 +2266,12 @@ static struct pci_device_id serial_pci_tbl[] = { ...@@ -2269,10 +2266,12 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_8_115200 }, pbn_b1_8_115200 },
{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4,
0, 0,
pbn_b0_4_921600 }, pbn_b0_4_921600 },
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL, 0, 0, PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
0, 0,
pbn_b0_4_1152000 }, pbn_b0_4_1152000 },
/* /*
...@@ -2312,7 +2311,7 @@ static struct pci_device_id serial_pci_tbl[] = { ...@@ -2312,7 +2311,7 @@ static struct pci_device_id serial_pci_tbl[] = {
* Digitan DS560-558, from jimd@esoft.com * Digitan DS560-558, from jimd@esoft.com
*/ */
{ PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b1_1_115200 }, pbn_b1_1_115200 },
/* /*
...@@ -2320,16 +2319,16 @@ static struct pci_device_id serial_pci_tbl[] = { ...@@ -2320,16 +2319,16 @@ static struct pci_device_id serial_pci_tbl[] = {
* The 400L and 800L have a custom setup quirk. * The 400L and 800L have a custom setup quirk.
*/ */
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_1_921600 }, pbn_b0_1_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_921600 }, pbn_b0_2_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 }, pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_4_921600 }, pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或