提交 55045ff5 编写于 作者: W Wu Zhangjin 提交者: Ralf Baechle

MIPS: Loongson 2F: Cleanup the #if clauses

This patch adds two new kernel options: CPU_SUPPORTS_CPUFREQ and
CPU_SUPPORTS_ADDRWINCFG to describe the new features of Loongons 2F and
replaces the several ugly #if clauses by them.

These two options will be utilized by the future loongson revisions and
related drivers such as the coming Loongson 2F CPUFreq driver.
Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 6e34358e
......@@ -1334,6 +1334,8 @@ config SYS_HAS_CPU_LOONGSON2E
config SYS_HAS_CPU_LOONGSON2F
bool
select CPU_SUPPORTS_CPUFREQ
select CPU_SUPPORTS_ADDRWINCFG if 64BIT
config SYS_HAS_CPU_MIPS32_R1
bool
......@@ -1443,6 +1445,10 @@ config CPU_SUPPORTS_32BIT_KERNEL
bool
config CPU_SUPPORTS_64BIT_KERNEL
bool
config CPU_SUPPORTS_CPUFREQ
bool
config CPU_SUPPORTS_ADDRWINCFG
bool
config CPU_SUPPORTS_HUGEPAGES
bool
config MIPS_PGD_C0_CONTEXT
......
......@@ -227,7 +227,7 @@ extern void mach_irq_dispatch(unsigned int pending);
((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6))
/* Chip Config */
#ifdef CONFIG_CPU_LOONGSON2F
#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
#define LOONGSON_CHIPCFG0 LOONGSON_REG(LOONGSON_REGBASE + 0x80)
#endif
......@@ -236,7 +236,7 @@ extern void mach_irq_dispatch(unsigned int pending);
*
* loongson2e do not have this module
*/
#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
/* address window config module base address */
#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul
......@@ -306,6 +306,6 @@ extern unsigned long _loongson_addrwincfg_base;
#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \
LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size)
#endif /* ! CONFIG_CPU_LOONGSON2F && CONFIG_64BIT */
#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */
#endif /* __ASM_MACH_LOONGSON_LOONGSON_H */
......@@ -28,7 +28,7 @@ extern struct pci_ops loongson_pci_ops;
/* this is an offset from mips_io_port_base */
#define LOONGSON_PCI_IO_START 0x00004000UL
#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
/*
* we use address window2 to map cpu address space to pci space
......@@ -56,6 +56,6 @@ extern struct pci_ops loongson_pci_ops;
/* this is an offset from mips_io_port_base */
#define LOONGSON_PCI_IO_START 0x00004000UL
#endif /* !(defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT))*/
#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
#endif /* !__ASM_MACH_LOONGSON_PCI_H_ */
......@@ -21,7 +21,7 @@ void __init prom_init(void)
set_io_port_base((unsigned long)
ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
_loongson_addrwincfg_base = (unsigned long)
ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
#endif
......
......@@ -20,8 +20,7 @@ void __init prom_init_memory(void)
add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize <<
20), BOOT_MEM_RESERVED);
#ifdef CONFIG_64BIT
#ifdef CONFIG_CPU_LOONGSON2F
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
{
int bit;
......@@ -36,8 +35,9 @@ void __init prom_init_memory(void)
0x80000000ul, (1 << bit));
mmiowb();
}
#endif /* CONFIG_CPU_LOONGSON2F */
#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */
#ifdef CONFIG_64BIT
if (highmemsize > 0)
add_memory_region(LOONGSON_HIGHMEM_START,
highmemsize << 20, BOOT_MEM_RAM);
......@@ -45,7 +45,7 @@ void __init prom_init_memory(void)
add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START -
LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED);
#endif /* CONFIG_64BIT */
#endif /* !CONFIG_64BIT */
}
/* override of arch/mips/mm/cache.c: __uncached_access */
......
......@@ -68,7 +68,7 @@ static void __init setup_pcimap(void)
deassert for some broken device */
LOONGSON_PXARB_CFG = 0x00fe0105ul;
#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
/*
* set cpu addr window2 to map CPU address space to PCI address space
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册