ARM: OMAP1: Move plat/tc.h to mach/tc.h for omap1

We cannot keep this in plat as it causes problems
with the ARM single zImage support.

Cc: Felipe Balbi <balbi@ti.com>
Cc: linux-pcmcia@lists.infradead.org
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-fsample.c

@@ -27,7 +27,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 #include <mach/flash.h>
 #include <../plat-omap/fpga.h>

arch/arm/mach-omap1/board-h2.c

@@ -40,7 +40,7 @@
 
 #include <mach/mux.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <mach/flash.h>

arch/arm/mach-omap1/board-h3.c

@@ -41,7 +41,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <plat-omap/dma-omap.h>
 #include <mach/flash.h>

arch/arm/mach-omap1/board-innovator.c

@@ -34,7 +34,7 @@
 #include <mach/mux.h>
 #include <mach/flash.h>
 #include <../plat-omap/fpga.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap1/board-osk.c

@@ -48,7 +48,7 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>

arch/arm/mach-omap1/board-palmte.c

@@ -36,7 +36,7 @@
 
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>

arch/arm/mach-omap1/board-palmtt.c

@@ -37,7 +37,7 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 

arch/arm/mach-omap1/board-palmz71.c

@@ -39,7 +39,7 @@
 #include <mach/flash.h>
 #include <mach/mux.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/irda.h>
 #include <linux/platform_data/keypad-omap.h>
 

arch/arm/mach-omap1/board-perseus2.c

@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 #include <../plat-omap/fpga.h>
 #include <mach/flash.h>

arch/arm/mach-omap1/board-sx1.c

@@ -38,7 +38,7 @@
 #include <mach/mux.h>
 #include <plat-omap/dma-omap.h>
 #include <mach/irda.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/board-sx1.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap1/board-voiceblue.c

@@ -34,7 +34,7 @@
 #include <mach/board-voiceblue.h>
 #include <mach/flash.h>
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 #include <mach/hardware.h>
 #include <mach/usb.h>

arch/arm/mach-omap1/devices.c

@@ -19,7 +19,7 @@
 
 #include <asm/mach/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 
 #include <mach/omap7xx.h>

arch/arm/mach-omap1/dma.c

@@ -26,7 +26,7 @@
 #include <linux/io.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 #include <mach/irqs.h>
 

arch/arm/mach-omap1/flash.c

@@ -10,7 +10,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/flash.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap1/include/mach/hardware.h

@@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa);
 extern void omap_writew(u16 v, u32 pa);
 extern void omap_writel(u32 v, u32 pa);
 
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 /* Almost all documentation for chip and board memory maps assumes
  * BM is clear.  Most devel boards have a switch to control booting

arch/arm/mach-omap1/io.c

@@ -17,7 +17,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <plat-omap/dma-omap.h>
 
 #include "iomap.h"

arch/arm/mach-omap1/pm.c

@@ -52,7 +52,7 @@
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 #include <mach/mux.h>
 #include <plat-omap/dma-omap.h>
 #include <plat/dmtimer.h>

arch/arm/mach-omap2/board-flash.c

@@ -21,7 +21,6 @@
 #include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
-#include <plat/tc.h>
 
 #include "common.h"
 #include "board-flash.h"

arch/arm/plat-omap/dma.c

@@ -38,7 +38,6 @@
 
 #include <plat/cpu.h>
 #include <plat-omap/dma-omap.h>
-#include <plat/tc.h>
 
 /*
  * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
@@ -175,6 +174,7 @@ static inline void set_gdma_dev(int req, int dev)
 #define omap_writel(val, reg)	do {} while (0)
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
 	unsigned long reg;
@@ -203,18 +203,22 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
 		l |= (priority & 0xf) << 8;
 		omap_writel(l, reg);
 	}
+}
+#endif
 
-	if (cpu_class_is_omap2()) {
-		u32 ccr;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+	u32 ccr;
 
-		ccr = p->dma_read(CCR, lch);
-		if (priority)
-			ccr |= (1 << 6);
-		else
-			ccr &= ~(1 << 6);
-		p->dma_write(ccr, CCR, lch);
-	}
+	ccr = p->dma_read(CCR, lch);
+	if (priority)
+		ccr |= (1 << 6);
+	else
+		ccr &= ~(1 << 6);
+	p->dma_write(ccr, CCR, lch);
 }
+#endif
 EXPORT_SYMBOL(omap_set_dma_priority);
 
 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,

drivers/pcmcia/omap_cf.c

@@ -25,7 +25,7 @@
 #include <asm/sizes.h>
 
 #include <mach/mux.h>
-#include <plat/tc.h>
+#include <mach/tc.h>
 
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have