提交 5435f281 编写于 作者: B Bruno Prémont 提交者: Jiri Kosina

HID: hid-picolcd depends on LCD_CLASS_DEVICE

HID_PICOLCD should depend on LCD_CLASS_DEVICE, otherwise the
build fails when HID_PICOLCD=y and LCD_CLASS_DEVICE=m:

hid-picolcd.c:(.text+0x84523f): undefined reference to `lcd_device_unregister'
hid-picolcd.c:(.text+0x8478ab): undefined reference to `lcd_device_register'
hid-picolcd.c:(.text+0x84c15f): undefined reference to `lcd_device_unregister'

Same applies to FB, BACKLIGHT_CLASS_DEVICE and LEDS_CLASS.

Add suboptions for those features to handle the deps on kbuild side
and just check HID_PICOLCD_* in the code.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 eb741103
......@@ -265,11 +265,6 @@ config HID_PETALYNX
config HID_PICOLCD
tristate "PicoLCD (graphic version)"
depends on USB_HID
select FB_DEFERRED_IO if FB
select FB_SYS_FILLRECT if FB
select FB_SYS_COPYAREA if FB
select FB_SYS_IMAGEBLIT if FB
select FB_SYS_FOPS if FB
---help---
This provides support for Minibox PicoLCD devices, currently
only the graphical ones are supported.
......@@ -277,14 +272,54 @@ config HID_PICOLCD
This includes support for the following device features:
- Keypad
- Switching between Firmware and Flash mode
- Framebuffer for monochrome 256x64 display
- Backlight control (needs CONFIG_BACKLIGHT_CLASS_DEVICE)
- Contrast control (needs CONFIG_LCD_CLASS_DEVICE)
- General purpose outputs (needs CONFIG_LEDS_CLASS)
- EEProm / Flash access (via debugfs)
Features selectively enabled:
- Framebuffer for monochrome 256x64 display
- Backlight control
- Contrast control
- General purpose outputs
Features that are not (yet) supported:
- IR
config HID_PICOLCD_FB
bool "Framebuffer support" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=FB || FB=y
select FB_DEFERRED_IO
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
---help---
Provide access to PicoLCD's 256x64 monochrome display via a
frambuffer device.
config HID_PICOLCD_BACKLIGHT
bool "Backlight control" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=y
---help---
Provide access to PicoLCD's backlight control via backlight
class.
config HID_PICOLCD_LCD
bool "Contrast control" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=LCD_CLASS_DEVICE || LCD_CLASS_DEVICE=y
---help---
Provide access to PicoLCD's LCD contrast via lcd class.
config HID_PICOLCD_LEDS
bool "GPO via leds class" if EMBEDDED
default !EMBEDDED
depends on HID_PICOLCD
depends on HID_PICOLCD=LEDS_CLASS || LEDS_CLASS=y
---help---
Provide access to PicoLCD's GPO pins via leds class.
config HID_QUANTA
tristate "Quanta Optical Touch"
depends on USB_HID
......
......@@ -77,7 +77,7 @@
#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */
#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */
#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
#ifdef CONFIG_HID_PICOLCD_FB
/* Framebuffer
*
* The PicoLCD use a Topway LCD module of 256x64 pixel
......@@ -128,7 +128,7 @@ static const struct fb_var_screeninfo picolcdfb_var = {
.bits_per_pixel = 1,
.grayscale = 1,
};
#endif /* CONFIG_FB */
#endif /* CONFIG_HID_PICOLCD_FB */
/* Input device
*
......@@ -183,7 +183,7 @@ struct picolcd_data {
struct input_dev *input_cir;
unsigned short keycode[PICOLCD_KEYS];
#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
#ifdef CONFIG_HID_PICOLCD_FB
/* Framebuffer stuff */
u8 fb_update_rate;
u8 fb_bpp;
......@@ -191,21 +191,21 @@ struct picolcd_data {
u8 *fb_bitmap; /* framebuffer */
struct fb_info *fb_info;
struct fb_deferred_io fb_defio;
#endif /* CONFIG_FB */
#if defined(CONFIG_LCD_CLASS_DEVICE) || defined(CONFIG_LCD_CLASS_DEVICE_MODULE)
#endif /* CONFIG_HID_PICOLCD_FB */
#ifdef CONFIG_HID_PICOLCD_LCD
struct lcd_device *lcd;
u8 lcd_contrast;
#endif
#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
#endif /* CONFIG_HID_PICOLCD_LCD */
#ifdef CONFIG_HID_PICOLCD_BACKLIGHT
struct backlight_device *backlight;
u8 lcd_brightness;
u8 lcd_power;
#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
#ifdef CONFIG_HID_PICOLCD_LEDS
/* LED stuff */
u8 led_state;
struct led_classdev *led[8];
#endif /* CONFIG_LEDS_CLASS */
#endif /* CONFIG_HID_PICOLCD_LEDS */
/* Housekeeping stuff */
spinlock_t lock;
......@@ -287,7 +287,7 @@ static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev,
return work;
}
#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
#ifdef CONFIG_HID_PICOLCD_FB
/* Send a given tile to PicoLCD */
static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile)
{
......@@ -766,9 +766,9 @@ static void picolcd_exit_framebuffer(struct picolcd_data *data)
{
}
#define picolcd_fbinfo(d) NULL
#endif /* CONFIG_FB */
#endif /* CONFIG_HID_PICOLCD_FB */
#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)
#ifdef CONFIG_HID_PICOLCD_BACKLIGHT
/*
* backlight class device
*/
......@@ -864,9 +864,9 @@ static inline int picolcd_resume_backlight(struct picolcd_data *data)
{
return 0;
}
#endif /* CONFIG_BACKLIGHT_CLASS_DEVICE */
#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
#if defined(CONFIG_LCD_CLASS_DEVICE) || defined(CONFIG_LCD_CLASS_DEVICE_MODULE)
#ifdef CONFIG_HID_PICOLCD_LCD
/*
* lcd class device
*/
......@@ -957,9 +957,9 @@ static inline int picolcd_resume_lcd(struct picolcd_data *data)
{
return 0;
}
#endif /* CONFIG_LCD_CLASS_DEVICE */
#endif /* CONFIG_HID_PICOLCD_LCD */
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
#ifdef CONFIG_HID_PICOLCD_LEDS
/**
* LED class device
*/
......@@ -1104,7 +1104,7 @@ static inline int picolcd_leds_set(struct picolcd_data *data)
{
return 0;
}
#endif /* CONFIG_LEDS_CLASS */
#endif /* CONFIG_HID_PICOLCD_LEDS */
/*
* input class device
......@@ -1243,10 +1243,10 @@ static int picolcd_reset(struct hid_device *hdev)
picolcd_resume_lcd(data);
picolcd_resume_backlight(data);
#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
#ifdef CONFIG_HID_PICOLCD_FB
if (data->fb_info)
schedule_delayed_work(&data->fb_info->deferred_work, 0);
#endif /* CONFIG_FB */
#endif /* CONFIG_HID_PICOLCD_FB */
picolcd_leds_set(data);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册