Merge tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes for 4.11-rc4 that resolve a
  number of tiny reported issues. All of these have been in linux-next
  for a while with no reported issues"

* tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration
  iio: adc: ti_am335x_adc: fix fifo overrun recovery
  iio: sw-device: Fix config group initialization
  iio: magnetometer: ak8974: remove incorrect __exit markups
  iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3

drivers/iio/adc/ti_am335x_adc.c

@@ -169,7 +169,9 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
 {
 	struct iio_dev *indio_dev = private;
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
-	unsigned int status, config;
+	unsigned int status, config, adc_fsm;
+	unsigned short count = 0;
+
 	status = tiadc_readl(adc_dev, REG_IRQSTATUS);
 
 	/*
@@ -183,6 +185,15 @@ static irqreturn_t tiadc_irq_h(int irq, void *private)
 		tiadc_writel(adc_dev, REG_CTRL, config);
 		tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1OVRRUN
 				| IRQENB_FIFO1UNDRFLW | IRQENB_FIFO1THRES);
+
+		/* wait for idle state.
+		 * ADC needs to finish the current conversion
+		 * before disabling the module
+		 */
+		do {
+			adc_fsm = tiadc_readl(adc_dev, REG_ADCFSM);
+		} while (adc_fsm != 0x10 && count++ < 100);
+
 		tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_TSCSSENB));
 		return IRQ_HANDLED;
 	} else if (status & IRQENB_FIFO1THRES) {

drivers/iio/common/hid-sensors/hid-sensor-trigger.c

@@ -51,8 +51,6 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 			st->report_state.report_id,
 			st->report_state.index,
 			HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM);
-
-		poll_value = hid_sensor_read_poll_value(st);
 	} else {
 		int val;
 
@@ -89,7 +87,9 @@ static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 	sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
 			       st->power_state.index,
 			       sizeof(state_val), &state_val);
-	if (state && poll_value)
+	if (state)
+		poll_value = hid_sensor_read_poll_value(st);
+	if (poll_value > 0)
 		msleep_interruptible(poll_value * 2);
 
 	return 0;

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c

@@ -193,8 +193,8 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
 	if (err < 0)
 		goto out;
 
-	fifo_watermark = ((data & ~ST_LSM6DSX_FIFO_TH_MASK) << 8) |
-			  (fifo_watermark & ST_LSM6DSX_FIFO_TH_MASK);
+	fifo_watermark = ((data << 8) & ~ST_LSM6DSX_FIFO_TH_MASK) |
+			 (fifo_watermark & ST_LSM6DSX_FIFO_TH_MASK);
 
 	wdata = cpu_to_le16(fifo_watermark);
 	err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_THL_ADDR,

drivers/iio/magnetometer/ak8974.c

@@ -763,7 +763,7 @@ static int ak8974_probe(struct i2c_client *i2c,
 	return ret;
 }
 
-static int __exit ak8974_remove(struct i2c_client *i2c)
+static int ak8974_remove(struct i2c_client *i2c)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(i2c);
 	struct ak8974 *ak8974 = iio_priv(indio_dev);
@@ -845,7 +845,7 @@ static struct i2c_driver ak8974_driver = {
 		.of_match_table = of_match_ptr(ak8974_of_match),
 	},
 	.probe	  = ak8974_probe,
-	.remove	  = __exit_p(ak8974_remove),
+	.remove	  = ak8974_remove,
 	.id_table = ak8974_id,
 };
 module_i2c_driver(ak8974_driver);

include/linux/iio/sw_device.h

@@ -62,7 +62,7 @@ void iio_swd_group_init_type_name(struct iio_sw_device *d,
 				  const char *name,
 				  struct config_item_type *type)
 {
-#ifdef CONFIG_CONFIGFS_FS
+#if IS_ENABLED(CONFIG_CONFIGFS_FS)
 	config_group_init_type_name(&d->group, name, type);
 #endif
 }