提交 529aa29e 编写于 作者: S Sascha Hauer

mmc mxcmmc: do not depend on grouped clocks

the current i.MX clock support groups together unrelated clocks
to a single clock which is then used by the driver. This can't
be accomplished with the generic clock framework so we instead
request the individual clocks in the driver. For i.MX there are
generally three different clocks:

ipg: bus clock (needed to access registers)
ahb: dma relevant clock, sometimes referred to as hclk in the datasheet
per: bit clock, pixel clock

This patch changes the driver to request the individual clocks.
Currently all clk_get will get the same clock until the SoCs
are converted to the generic clock framework
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 f4d40de3
......@@ -136,7 +136,8 @@ struct mxcmci_host {
u16 rev_no;
unsigned int cmdat;
struct clk *clk;
struct clk *clk_ipg;
struct clk *clk_per;
int clock;
......@@ -672,7 +673,7 @@ static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios)
{
unsigned int divider;
int prescaler = 0;
unsigned int clk_in = clk_get_rate(host->clk);
unsigned int clk_in = clk_get_rate(host->clk_per);
while (prescaler <= 0x800) {
for (divider = 1; divider <= 0xF; divider++) {
......@@ -900,12 +901,20 @@ static int mxcmci_probe(struct platform_device *pdev)
host->res = r;
host->irq = irq;
host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
host->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(host->clk_ipg)) {
ret = PTR_ERR(host->clk_ipg);
goto out_iounmap;
}
clk_enable(host->clk);
host->clk_per = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(host->clk_per)) {
ret = PTR_ERR(host->clk_per);
goto out_iounmap;
}
clk_prepare_enable(host->clk_per);
clk_prepare_enable(host->clk_ipg);
mxcmci_softreset(host);
......@@ -917,8 +926,8 @@ static int mxcmci_probe(struct platform_device *pdev)
goto out_clk_put;
}
mmc->f_min = clk_get_rate(host->clk) >> 16;
mmc->f_max = clk_get_rate(host->clk) >> 1;
mmc->f_min = clk_get_rate(host->clk_per) >> 16;
mmc->f_max = clk_get_rate(host->clk_per) >> 1;
/* recommended in data sheet */
writew(0x2db4, host->base + MMC_REG_READ_TO);
......@@ -967,8 +976,8 @@ static int mxcmci_probe(struct platform_device *pdev)
if (host->dma)
dma_release_channel(host->dma);
out_clk_put:
clk_disable(host->clk);
clk_put(host->clk);
clk_disable_unprepare(host->clk_per);
clk_disable_unprepare(host->clk_ipg);
out_iounmap:
iounmap(host->base);
out_free:
......@@ -999,8 +1008,8 @@ static int mxcmci_remove(struct platform_device *pdev)
if (host->dma)
dma_release_channel(host->dma);
clk_disable(host->clk);
clk_put(host->clk);
clk_disable_unprepare(host->clk_per);
clk_disable_unprepare(host->clk_ipg);
release_mem_region(host->res->start, resource_size(host->res));
......@@ -1018,7 +1027,8 @@ static int mxcmci_suspend(struct device *dev)
if (mmc)
ret = mmc_suspend_host(mmc);
clk_disable(host->clk);
clk_disable_unprepare(host->clk_per);
clk_disable_unprepare(host->clk_ipg);
return ret;
}
......@@ -1029,7 +1039,8 @@ static int mxcmci_resume(struct device *dev)
struct mxcmci_host *host = mmc_priv(mmc);
int ret = 0;
clk_enable(host->clk);
clk_prepare_enable(host->clk_per);
clk_prepare_enable(host->clk_ipg);
if (mmc)
ret = mmc_resume_host(mmc);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册