提交 527cf71f 编写于 作者: L Lars-Peter Clausen 提交者: Greg Kroah-Hartman

staging:iio:magnetometer: Use dev_to_iio_dev()

Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 96f691f9
......@@ -242,7 +242,7 @@ static int ak8975_setup(struct i2c_client *client)
static ssize_t show_mode(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ak8975_data *data = iio_priv(indio_dev);
return sprintf(buf, "%u\n", data->mode);
......@@ -255,7 +255,7 @@ static ssize_t show_mode(struct device *dev, struct device_attribute *devattr,
static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
const char *buf, size_t count)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct ak8975_data *data = iio_priv(indio_dev);
struct i2c_client *client = data->client;
bool value;
......
......@@ -184,7 +184,7 @@ static ssize_t hmc5843_show_operating_mode(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct hmc5843_data *data = iio_priv(indio_dev);
return sprintf(buf, "%d\n", data->operating_mode);
}
......@@ -194,7 +194,7 @@ static ssize_t hmc5843_set_operating_mode(struct device *dev,
const char *buf,
size_t count)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
struct hmc5843_data *data = iio_priv(indio_dev);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
......@@ -260,7 +260,7 @@ static ssize_t hmc5843_show_measurement_configuration(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct hmc5843_data *data = iio_priv(indio_dev);
return sprintf(buf, "%d\n", data->meas_conf);
}
......@@ -270,7 +270,7 @@ static ssize_t hmc5843_set_measurement_configuration(struct device *dev,
const char *buf,
size_t count)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
struct hmc5843_data *data = i2c_get_clientdata(client);
unsigned long meas_conf = 0;
......@@ -331,7 +331,7 @@ static ssize_t set_sampling_frequency(struct device *dev,
const char *buf, size_t count)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
struct hmc5843_data *data = iio_priv(indio_dev);
unsigned long rate = 0;
......@@ -369,7 +369,7 @@ static ssize_t set_sampling_frequency(struct device *dev,
static ssize_t show_sampling_frequency(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
s32 rate;
......@@ -404,7 +404,7 @@ static ssize_t show_range(struct device *dev,
char *buf)
{
u8 range;
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct hmc5843_data *data = iio_priv(indio_dev);
range = data->range;
......@@ -416,7 +416,7 @@ static ssize_t set_range(struct device *dev,
const char *buf,
size_t count)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
struct i2c_client *client = to_i2c_client(indio_dev->dev.parent);
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
struct hmc5843_data *data = iio_priv(indio_dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册